Exam Details
| Subject | Structural Design And Drawing - II | |
| Paper | ||
| Exam / Course | B.Tech Civi Engg. (BTCLEVI)/B.Tech Electronics And Communication Engg. (BTECVI) | |
| Department | School of Engineering & Technology (SOET) | |
| Organization | indira gandhi national open university | |
| Position | ||
| Exam Date | June, 2016 | |
| City, State | new delhi, |
Question Paper
1. Explain the following in detail
Post-Tensioning method and Pre-Tensioning method
Stability of steel chimney
2. Design a stringer beam for a through type truss bridge of span 60 m. The cross beams are provided at 6 m c/c. The stringer beams are at 2 m c/c. Bridge is used for National highway.
3. A rectangular beam, 200 mm x 400 mm, spans over 10 m and carries an imposed load of 5 kN/m. If the force of prestress is 500 kN and tendons are centred at 100 mm from the bottom, compute the stresses in the beam using the load balancing concept. Assume the profile of prestress tendons as parabolic.
4. A 125 KL circular overhead water tank has the following dimensions:
Inner radius of circular wall =4250 mm Thickness of wall =100 mm
Height of wall 3150 mm
Thickness of top dome =75 mm
Rise of bottom of top dome =1000 mm
Free board =150 mm
Height of staging above G.L. =25 m
Design only top dome, top ring beam and vertical wall of the tank. Use M25 and HYSD bars.
What is the difference between plate girder bridges and truss girder bridges?
Describe the factors for selecting the type of steel chimneys.
6. Write the steps for designing of towers supported with foundation.
7. Write down the design steps for the following members of a square steel tank.
Vertical side walls
Base slab
Post-Tensioning method and Pre-Tensioning method
Stability of steel chimney
2. Design a stringer beam for a through type truss bridge of span 60 m. The cross beams are provided at 6 m c/c. The stringer beams are at 2 m c/c. Bridge is used for National highway.
3. A rectangular beam, 200 mm x 400 mm, spans over 10 m and carries an imposed load of 5 kN/m. If the force of prestress is 500 kN and tendons are centred at 100 mm from the bottom, compute the stresses in the beam using the load balancing concept. Assume the profile of prestress tendons as parabolic.
4. A 125 KL circular overhead water tank has the following dimensions:
Inner radius of circular wall =4250 mm Thickness of wall =100 mm
Height of wall 3150 mm
Thickness of top dome =75 mm
Rise of bottom of top dome =1000 mm
Free board =150 mm
Height of staging above G.L. =25 m
Design only top dome, top ring beam and vertical wall of the tank. Use M25 and HYSD bars.
What is the difference between plate girder bridges and truss girder bridges?
Describe the factors for selecting the type of steel chimneys.
6. Write the steps for designing of towers supported with foundation.
7. Write down the design steps for the following members of a square steel tank.
Vertical side walls
Base slab
Other Question Papers
Departments
- Centre for Corporate Education, Training & Consultancy (CCETC)
- Centre for Corporate Education, Training & Consultancy (CCETC)
- National Centre for Disability Studies (NCDS)
- School of Agriculture (SOA)
- School of Computer and Information Sciences (SOCIS)
- School of Continuing Education (SOCE)
- School of Education (SOE)
- School of Engineering & Technology (SOET)
- School of Extension and Development Studies (SOEDS)
- School of Foreign Languages (SOFL)
- School of Gender Development Studies(SOGDS)
- School of Health Science (SOHS)
- School of Humanities (SOH)
- School of Interdisciplinary and Trans-Disciplinary Studies (SOITDS)
- School of Journalism and New Media Studies (SOJNMS)
- School of Law (SOL)
- School of Management Studies (SOMS)
- School of Performing Arts and Visual Arts (SOPVA)
- School of Performing Arts and Visual Arts(SOPVA)
- School of Sciences (SOS)
- School of Social Sciences (SOSS)
- School of Social Work (SOSW)
- School of Tourism & Hospitality Service Sectoral SOMS (SOTHSM)
- School of Tourism &Hospitality Service Sectoral SOMS (SOTHSSM)
- School of Translation Studies and Training (SOTST)
- School of Vocational Education and Training (SOVET)
- Staff Training & Research in Distance Education (STRIDE)
Subjects
- Advance Surveying
- Advanced Design Of Foundation
- Advanced Environmental Engineering
- Advanced Structural Analysis
- Bachelor Of Technology (Ce)
- Building Technology -I
- Civil Engineering
- Computational Methods In Structural Engineering
- Earth And Rock Fill Dam Engineering
- Elements of Engineering Science
- Engineering Geology
- E n v i r o n m e n t a l E n g i n e e r i n g I I
- Environmental Engineering-I
- Estimation And Construction Management
- Geoinformatics
- Geotechnical Engineering - II
- Mathematics-III
- Pavement Evaluation
- Quantity Surveying and Costing
- Reliability And Optimization Of Structures
- Structural Analysis - II
- Structural Analysis - III
- Structural Analysis I
- Structural Design And Drawing - I
- Structural Design And Drawing - II
- Surveying
- Traffic Engineering
- Transportation Engg. II
- Transportation Engineering - I
- Transportation Planning
- Water Resources Engineering
- Water Resources System Planning And Design