1/3
Seat No.: Enrolment
GUJARAT TECHNOLOGICAL UNIVERSITY
DIPLOMA ENGINEERING- C to D Bridge Course Examination WINTER 2018
Subject Code: C325002 Date: 04-01-2019
Subject Name: ARCHITECTURAL DRAWING-II
Time: 02:30 PM TO 04:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Each question is of 1 mark.
4. Use of only simple calculator is permitted. (Scientific/Higher Version not allowed).
5. English version is authentic
Q.1
Draw the perspective view of the steps shown in fig.1,The position of the steps relative to the picture plane is shown in fig.. The station point is 200 mm from the picture plane. Take horizon level to be 100 mmm above the ground level
14



Q.2
A cube of 65 mm long edges is resting on the H.P with its vertical faces equally inclined to the V.P. Draw its projections
14


OR
Q.2
A hexagonal prism, side of base 60 mm long and axis 80 mm long is resting on the ground on its rectangular faces draw its projections.
14


Q.3
A pentagonal pyramid, base 40 mm side and axis70 mm long, has its base horizontal and an edge of the base parallel to the V.P. A horizontal section plane cuts it at a distance of 30 mm above the base. Draw its front view and sectional top view.
14


OR
Q.3
A square prism, base 40 mm side, axis 80 mm long, has its base on the H.P. and its faces equally inclined to the V.P. It is cut by a plane, perpendicular to the V.P., inclined at 60º to the H.P. and passing through a point on the axis, 50 mm above the H.P. Draw its front view, sectional top view and true shape of the section.
14


Q.4
Draw the development of lateral part P which is shown in fig.2
14

P
2/3
OR
Q.4
Draw the development of the lateral surface of a square prism with a hole drilled in it as shown in figure: 3.
14


Q.5

Draw in suitable scale, architectural presentation drawing with proper line weights (in pencil only) for the given plan as shown in figure 3. Show various material hatch, furniture and openings. Assume suitable measurements wherever necessary.
14



3/3