Exam Details
Subject | metrology and measuring instruments | |
Paper | ||
Exam / Course | b.voc | |
Department | ||
Organization | Gujarat Technological University | |
Position | ||
Exam Date | January, 2019 | |
City, State | gujarat, ahmedabad |
Question Paper
1
Seat No.: Enrolment
GUJARAT TECHNOLOGICAL UNIVERSITY
B.VOC. -SEMESTER 1(NEW SYLLABUS) EXAMINATION- WINTER 2018
Subject Code: 1110304 Date: 19-01-2019
Subject Name: Metrology and Measuring Instruments
Time: 10:30 AM to 12:30 PM Total Marks: 50
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Marks
Q.1
Define following:
Least count Repeatability Measurement Standard Error
05
Differentiate between precision and accuracy with suitable example.
05
Q.2
Give classification of comparators and explain Dial indicator with sketch.
05
With neat sketch explain working of Johansson Mikrocator.
05
OR
Explain construction and working of Reed type mechanical comparator.
05
Q.3
Explain the methods of measuring surface finish.
05
Explain the following terms used in surface finish with sketch: Roughness, Waviness, Effective profile, Centerline of profile, surface texture, lay.
05
OR
Q.3
Explain following methods of specifying roughness value: Peak-to-valley height method; Centre-line-average method; Root mean square method.
05
Sketch and describe the construction and working of Tomlinson surface roughness tester
05
Q.4
Describe with neat sketch the construction and working of Vernier calliper.
05
Explain construction and use of vernier bevel protractor.
05
OR
Q.4
Explain thermocouple in detail.
05
Enlist various instruments used for thread and gear measurement and explain any one in detail.
05
Q.5
Explain construction and working of sine bar with neat sketch.
05
Describe defects likely to occur in measuring instruments and their remedies.
05
OR
Q.5
Explain bourdon tube type pressure gauge.
05
Define Straightness Flatness Circularity(4) Parallelism Squareness
05
Seat No.: Enrolment
GUJARAT TECHNOLOGICAL UNIVERSITY
B.VOC. -SEMESTER 1(NEW SYLLABUS) EXAMINATION- WINTER 2018
Subject Code: 1110304 Date: 19-01-2019
Subject Name: Metrology and Measuring Instruments
Time: 10:30 AM to 12:30 PM Total Marks: 50
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Marks
Q.1
Define following:
Least count Repeatability Measurement Standard Error
05
Differentiate between precision and accuracy with suitable example.
05
Q.2
Give classification of comparators and explain Dial indicator with sketch.
05
With neat sketch explain working of Johansson Mikrocator.
05
OR
Explain construction and working of Reed type mechanical comparator.
05
Q.3
Explain the methods of measuring surface finish.
05
Explain the following terms used in surface finish with sketch: Roughness, Waviness, Effective profile, Centerline of profile, surface texture, lay.
05
OR
Q.3
Explain following methods of specifying roughness value: Peak-to-valley height method; Centre-line-average method; Root mean square method.
05
Sketch and describe the construction and working of Tomlinson surface roughness tester
05
Q.4
Describe with neat sketch the construction and working of Vernier calliper.
05
Explain construction and use of vernier bevel protractor.
05
OR
Q.4
Explain thermocouple in detail.
05
Enlist various instruments used for thread and gear measurement and explain any one in detail.
05
Q.5
Explain construction and working of sine bar with neat sketch.
05
Describe defects likely to occur in measuring instruments and their remedies.
05
OR
Q.5
Explain bourdon tube type pressure gauge.
05
Define Straightness Flatness Circularity(4) Parallelism Squareness
05
Other Question Papers
Subjects
- automobile electrical equipment
- basics of air conditioning
- basics of refrigeration (b.o.r)
- engineering materials
- general mechanical engineering - ii
- it foundation and programming concepts
- machine tool technology
- metrology and measuring instruments
- modern electric & hybrid vehicles
- motor vehicle technology ii
- operating system
- production technology
- programming in c
- soldering & de-soldering of components & emergency action ii
- two and three wheeler
- web designing