Exam Details
| Subject | yarn manufacturing - ii | |
| Paper | ||
| Exam / Course | b.e | |
| Department | ||
| Organization | Gujarat Technological University | |
| Position | ||
| Exam Date | December, 2018 | |
| City, State | gujarat, ahmedabad |
Question Paper
1
Seat No.: Enrolment
GUJARAT TECHNOLOGICAL UNIVERSITY
BE SEMESTER-IV EXAMINATION WINTER 2018
Subject Code: 2142901 Date: 05/12/2018
Subject Name: Yarn Manufacturing II
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1
What Is The Objects Of Draw Frame?
3
With Neat Sketch Explain The Passage Of Material On Draw Frame Machine.
4
Explain The Sequence Of Operation In A Rectilinear Comber.
7
Q.2
Write Down The Formula To Calculate The Production Of Draw Frame In Kgs/Shift.
3
What Is Bobbin Lead And Flyer Lead. Discuss
4
Mention Various Types Of Drafting System Used In Draw Frame. With A Suitable Diagram Explain The 3 Over 3 Roller Drafting System Used In Draw Frame.
7
OR
Explain Various Comber Settings.
7
Q.3
Briefly Explain Suction System For Drafting Arrangement In Drawframe
3
Which Parameters Are Influence In The Feed Stock On Combing?
4
Write Short Note On Drafting Wave. Also Suggest Steps To Control The Problem.
7
OR
Q.3
Why Even Number Of Machines Are Used Between Card And Comber?
3
Discuss The Latest Developments On A Drawframe Machine.
4
Write Short Note On Open Loop Autoleveller Close Loop Autoleveller.
7
Q.4
What Is Forward Feed And Backward Feed In Comber.
3
Explain The Working Of Autoleveller On Drawframe.
4
Write A Short Note On Modern Lap Preparation Systems.
7
OR
Q.4
Enlist Object Of Speedframe
3
Calculate Speed Frame Production In Pound/Shift/Spindle And Draft From Following Data: Flyer Speed: 1200rpm Sliver Hank: 0.16 Roving Hank: 2 T.M: 1.2 Efficiency: 85%
4
State The Objectives Of Builder Motion At Speedframe And Explain How It Is Achieved With A Neat Sketch.
7
2
Q.5
Write The Function Of The Following Elements Used In Roving Frame: Spacer; Condenser; Flyer Tops
3
Calculate Comber Production In Kg/Day/Machine From The Following Data: Type Of Feed: Backward. Feed/Nip 6 Mm Waste Percentage:16 Comber Speed: 425 Nips/Min Comber Lap Hank 0.0125 Efficiency: 88% Maximum Fiber Length 40mm
4
Discuss The Various Parameters Influencing Combing Operation.
7
OR
Q.5
Write The Function Of Pressure Bar Used In Drafting System Of Draw Frame Machine.
3
Write On The Latest Developments In The Speedframe Machine.
4
Explain Passage Of Material On Super Lap Former.
7
Seat No.: Enrolment
GUJARAT TECHNOLOGICAL UNIVERSITY
BE SEMESTER-IV EXAMINATION WINTER 2018
Subject Code: 2142901 Date: 05/12/2018
Subject Name: Yarn Manufacturing II
Time: 02:30 PM TO 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
MARKS
Q.1
What Is The Objects Of Draw Frame?
3
With Neat Sketch Explain The Passage Of Material On Draw Frame Machine.
4
Explain The Sequence Of Operation In A Rectilinear Comber.
7
Q.2
Write Down The Formula To Calculate The Production Of Draw Frame In Kgs/Shift.
3
What Is Bobbin Lead And Flyer Lead. Discuss
4
Mention Various Types Of Drafting System Used In Draw Frame. With A Suitable Diagram Explain The 3 Over 3 Roller Drafting System Used In Draw Frame.
7
OR
Explain Various Comber Settings.
7
Q.3
Briefly Explain Suction System For Drafting Arrangement In Drawframe
3
Which Parameters Are Influence In The Feed Stock On Combing?
4
Write Short Note On Drafting Wave. Also Suggest Steps To Control The Problem.
7
OR
Q.3
Why Even Number Of Machines Are Used Between Card And Comber?
3
Discuss The Latest Developments On A Drawframe Machine.
4
Write Short Note On Open Loop Autoleveller Close Loop Autoleveller.
7
Q.4
What Is Forward Feed And Backward Feed In Comber.
3
Explain The Working Of Autoleveller On Drawframe.
4
Write A Short Note On Modern Lap Preparation Systems.
7
OR
Q.4
Enlist Object Of Speedframe
3
Calculate Speed Frame Production In Pound/Shift/Spindle And Draft From Following Data: Flyer Speed: 1200rpm Sliver Hank: 0.16 Roving Hank: 2 T.M: 1.2 Efficiency: 85%
4
State The Objectives Of Builder Motion At Speedframe And Explain How It Is Achieved With A Neat Sketch.
7
2
Q.5
Write The Function Of The Following Elements Used In Roving Frame: Spacer; Condenser; Flyer Tops
3
Calculate Comber Production In Kg/Day/Machine From The Following Data: Type Of Feed: Backward. Feed/Nip 6 Mm Waste Percentage:16 Comber Speed: 425 Nips/Min Comber Lap Hank 0.0125 Efficiency: 88% Maximum Fiber Length 40mm
4
Discuss The Various Parameters Influencing Combing Operation.
7
OR
Q.5
Write The Function Of Pressure Bar Used In Drafting System Of Draw Frame Machine.
3
Write On The Latest Developments In The Speedframe Machine.
4
Explain Passage Of Material On Super Lap Former.
7
Other Question Papers
Subjects
- .net technology
- ac machines
- accommodation operation-ii
- accommodation operations-i
- advance .net technology
- advance avionics
- advance computer networks
- advance computing technology
- advance control theory
- advance electronics
- advance ferrous metallurgy
- advance heat transfer(department elective - i)
- advance java technology
- advance medical techniques
- advance microcontrollers
- advance microprocessor(departmental elective - iii)
- advance mining methods
- advance networking protocols
- advance plastics processing
- advance processors
- advance separation techniques
- advance topics in signal and image processing
- advance welding technology(department elective iii)
- advanced ceramics
- advanced construction and equipments
- advanced construction technology
- advanced control systems(departmental elective - iii)
- advanced environmental instrumentation
- advanced java
- advanced manufacturing processes
- advanced materials
- advanced materials and applications
- advanced microprocessors
- advanced molecular biology i
- advanced molecular biology-ii
- advanced non ferrous extractive metallurgy (department elective -ii)
- advanced organic chemistry for technologists
- advanced plastic mould design
- advanced power electronics
- advanced power electronics - i
- advanced power electronics devices & interface circuits
- advanced power electronics ii
- advanced power system - i
- advanced power system ii
- advanced strength of materials
- advanced structural analysis
- advanced surveying
- advanced wastewater treatment technologies
- advances in welding metallurgy (department elective - i)
- advertising, sales and distribution management
- aerodynamics i
- aerodynamics ii
- aerodynamics-1
- agriculture and food biotechnology
- air pollution & control
- air pollution control
- air pollution control and management
- aircraft control and navigation(department elective iii)
- aircraft design - 1
- aircraft design - ii
- aircraft design i
- aircraft design ii
- aircraft science and manufacturing processes
- aircraft structure-1
- aircraft structure-ii
- aircraft structures i
- aircraft structures ii
- aircraft systems and instruments
- aircraft systems, instruments and maintenance
- airport and operations management
- allied manufacturing processes
- allied manufacturing technique
- alloy design
- alloy design (department elective -iii)
- alternate energy sources
- alternative fuel and power systems
- alternative fuels & engines
- analog and digital communication
- analog and digital communication (ict)
- analog and digital electronics
- analog circuit design
- analog circuits-i
- analog circuits-ii
- analog electronics
- analog electronics and its applications
- analog signal processing
- analysis and design of algorithms
- analysis of mechanisms & machine elements
- analysis, applications, health and safety aspects of dyes & pigments(department elective – ix)
- analytical & optical instrumentation
- analytical techniques
- analytical textile chemistry - i
- android programming
- android programming(departmental elective - iii)
- animal and plant biotechnology
- antenna & wave propagation
- antenna & wave propogation
- application of cnt and metallic nanoparticles
- application of geoinformatics in civil engineering
- application of nanotechnology
- applied electronics
- applied fluid mechanics
- applied hydraulics and pneumatics
- applied industrial engineering in automobile(department elective ii)
- applied mathematics in plastic industry
- applied mechanics of solid(department elective - i)
- applied power electronics
- applied thermal and hydraulic engineering
- artificial intelligence
- audio - video systems
- audio video systems
- automated manufacturing - i
- automated manufacturing - ii
- automated manufacturing ii
- automation & control in rubber industries
- automation and computer integrated manufacturing
- automation(department elective iii)
- automative instrumentation(departmental elective - iii)
- automobile air conditioning system
- automobile body engineering
- automobile chassis and body engineering
- automobile component design
- automobile engineering
- automobile engineering(departmental elective - iii)
- automobile engines
- automobile heat transfer
- automobile maintenance and repair practice
- automobile mechanical measurements
- automobile system design
- automobile systems
- automobile transmission
- automotive and combustion engine technology(department elective iii)
- automotive computer controlled systems
- automotive electrical & electronics
- automotive electrical systems
- automotive hydraulics & pneumatics
- automotive manufacturing
- automptive and combustion engine technology
- aviation management
- avionics
- bakery & patisserie
- bakery and confectionary technology
- bar & beverage management
- basic accounts
- basic biochemistry
- basic civil engineering
- basic control theory
- basic electrical engineering
- basic electronics
- basic engineering in textile
- basic engineering thermodynamics
- basic food microbiology
- basic manufacturing processes
- basic mechanical engineering
- basic mechatronics
- basic mine surveying
- basic of plastic material testing
- basic plastic processing and thermal engineering
- basic plastics processing and thermal engineering
- basic power systems
- basic principle & strategic management
- basic rubber science
- basic taxonomy and techniques
- basics of catalysis
- basics of environmental hydraulics
- basics of fluid flow
- basics of food engineering
- basics of heat transfer
- basics of mass transfer
- basics of micro computer systems
- basics of reaction engineering
- basics of structural engineering
- basics of thermodynamics & kinetics
- batteries and fuel cell
- belts, hoses & footwear technology (departmental elective - iii)
- big data analytics(departmental elective - ii)
- big data analytics(departmental elective - iii)
- bio-medical control theory
- bio-medical signal processing
- bio-potential instrumentation
- biochemical calculations
- biochemical engineering
- biochemical engineering-ii
- bioelectric potential and measurement techniques
- bioinformatics - department elective i
- biological process for wastewater treatment
- biological processes for wastewater treatment
- biomaterials & implants
- biomechanics
- biomedical image processing
- biomedical instrumention(departmental elective - ii)
- biomedical microsystems (department elective - ii)
- biomedical transducers
- bioprocess plant design
- biosafety, patents and ipr
- biosensors & transducers
- biostatistics
- biostatisticsintellectual property rights(department elective - iii)
- biotechnology
- boundary layer theory(department elective - ii)
- building and town planning
- building automation
- building construction
- building technology and materials
- building, town and infrastructure planning
- buliding & town planning
- business information system
- business intelligence & data mining
- cad in textiles
- casting technology
- cell biology
- cell biology and industrial biotechnology
- ceramic and polymer materials (department elective -ii)
- characterisation of rubber
- characterization of nanomaterials-i
- characterization of nanomaterials-ii
- chemical engg processes
- chemical engineering materials
- chemical engineering maths
- chemical engineering processes
- chemical engineering thermodynamics - i
- chemical engineering thermodynamics & kinetics
- chemical engineering thermodynamics i
- chemical engineering thermodynamics-i
- chemical engineering thermodynamics-ii
- chemical process industries -ii
- chemical process industries-1
- chemical process industries-ii
- chemical process technology
- chemical reaction engineering - i
- chemical reaction engineering - ii
- chemical reaction engineering-i
- chemical system modelling
- chemistry
- chemistry for environmental science and technology
- chemistry of intermediates & colorants-i(department elective-i)
- chemistry of intermediates & colorants-ii
- chemistry of intermediates & colorants-iii
- chemistry of intermediates & dyes
- chemistry of plastic materials
- circuits and networks
- cleaner production & waste utilization
- cloud infrastructure and services(departmental elective - iii)
- coating technology
- commissioning of electrical equipments
- communication engineering
- communication skills
- compiler design
- complier design
- composite materials
- composite materials and smart structures
- composite technology
- compounding & processing of plastics & rubbers
- computational fluid dynamics -ii
- computational fluid dynamics i
- computational fluid dynamics ii
- computational fluid dynamics-1
- computational mechanics
- computer aided analysis and design for electrical engg.
- computer aided design
- computer aided design and analysis
- computer aided design for mechatronics
- computer aided designing & computer color matching
- computer aided manufacturing
- computer aided process synthesis
- computer application in mining
- computer application mining
- computer graphics
- computer integrated manufacturing
- computer integrated manufacturing in automobile industry(department elective ii)
- computer network
- computer networks
- computer organization
- computer organization and architecture
- computer oriented statistical methods
- computer programming & utilization
- computer programming and utilization
- computer programming and utilization-2
- concrete technology
- condition monitoring
- construction management
- construction management and equipments
- contributor personality development program
- control engineering
- control of electric drive
- control system
- control system and analysis
- control system components
- control system design
- control system engineering
- control systems architecture
- control theory
- conventional power engineering
- cryogenic engineering(department elective ii)
- cryptanalysis : fundamentals and applications
- data and file structure
- data communication and networking
- data compression
- data compression and data retrival
- data mining and business intelligence
- data structure
- data warehousing and data mining
- database management system
- database management systems
- dc machines and transformer
- defense programming in python
- design & fabrication of molds
- design & formulation of foods
- design and analysis of algorithm
- design and analysis of algorithms
- design concepts in basic electronics
- design for manufacturing and assembly
- design of ac machines
- design of air pollution control equipments
- design of concrete structures
- design of dc machines and transformer
- design of environmental structure
- design of facilities layout
- design of heat exchanger(department elective iii)
- design of hydrauilic structures(departmental elective - iii)
- design of hydraulic structures
- design of m/c elements - i
- design of machine element
- design of machine elements
- design of machine tools
- design of mechanisms - i
- design of mechanisms - ii
- design of mechanisms ii
- design of prestressed concrete structures & bridges(departmental elective - iii)
- design of product and machine tools
- design of reinforced concrete structures
- design of steel structures
- design of treatment plants
- design of water treatment units
- device driver & writing(departmental elective - iii)
- diagnostic instrumentation
- digital communication
- digital control
- digital control system
- digital design
- digital electronics
- digital electronics and its applications
- digital logic circuits
- digital logic design
- digital signal controllers(departmental elective iii)
- digital signal processing
- digital signal processing for power electronics
- digital signals & systems
- disaster assessment using geospatial techniques
- disaster management
- discrete time signal processing
- distributed control systems and scada
- distributed database application & system
- distributed dbms(departmental elective - ii)
- distributed operating system
- distributed systems
- dock harbour & airport engineering
- dot net technology (department elective - i)
- dye house management
- dynamics of machinery
- dynamics of machines & production engineering drawing
- e-commerce & e-business
- earthquake engineering
- earthquake engineering(departmental elective - ii)
- ecological aspects in textile processing
- ecology and environment
- ecology and remote sensing
- ecology geology-i
- economic geology i
- electrical & electronic measurement
- electrical and electronics measuring instruments
- electrical and optical properties of nanomaterials
- electrical drives
- electrical drives and controls
- electrical machine
- electrical machine - ii
- electrical machine - iii
- electrical machine design
- electrical machine design ii
- electrical machine design-i
- electrical machines
- electrical machines & electronics
- electrical machines & measurement
- electrical machines and electronics
- electrical machines-1
- electrical measurement and measuring instruments
- electrical measurements & electronics instruments
- electrical power
- electrical power engineering
- electrical power generation
- electrical power system – ii
- electrical power utilization
- electrical power utilization & traction
- electrical power utilization and traction
- electro mechanical energy conversion
- electro mechanical energy conversion - ii
- electro mechanical energy conversion-1
- electro mechanical measurements & instruments
- electromechanical measurements & instruments
- electrometallurgy & corrosion
- electronic and communication
- electronic communication
- electronic devices and circuits
- electronics in industries
- electronics measurement and instruments
- electronics system design(department elective - iii)
- elemantory communication skills
- elementary structural design
- elements of chemical engg
- elements of chemical engineering
- elements of civil engineering
- elements of electrical design
- elements of electrical engineering
- elements of fluid flow
- elements of material science
- elements of mechanical engineering
- elements of metallurgy
- elements of metallurgy and material science
- elements of nanoscience and nanotechnology-i
- elements of textile processes
- elements of textile technology and processing
- embedded & vlsi design
- embedded system design
- embedded system design(departmental elective - ii)
- embedded systems
- embedded systems(departmental elective - iii)
- energy conservation and management
- energy conservation and management(department elective ii)
- energy conservation, and audit(departmental elective - ii)
- energy conservation, and audit(departmental elective - iii)
- energy systems
- energy technology
- energy technology(department elective - ii)
- engineering economics and management
- engineering electromagnetics
- engineering electromagnetics & wave progogation
- engineering geology
- engineering graphics
- engineering graphics & design
- engineering materials and metallurgy
- engineering of pigmented dispersion
- engineering physics
- engineering system
- engineering thermodynamics
- engineering thermodynamics & heat transfer
- enterprise resource planning
- entrepreneurship and creativity
- entrepreneurship and creativity in plastic engineering
- entrepreneurship and food plant management
- entrepreneurship development & productivity engineering
- entrepreneurship(department elective iii)
- environment management in mine
- environmental bioscience
- environmental engineering
- environmental impact assessment
- environmental instrumentation
- environmental legislation & audit(departmental elective - iii )
- environmental legislation and audit
- environmental management - iii
- environmental management-ii
- environmental microbiology
- environmental microbiology & bioremediation
- environmental monitroing and statistics
- environmental reaction engineering
- environmental resources
- environmental science-1
- environmental sciences i
- environmental sciences ii
- environmental sciences-ii
- environmental studies
- enzymes and proteins
- estimating and costing
- estimating, costing & engineering economics
- estimating,specifications & project management
- estimation, specification & project management
- evaluation & testing of polymers & rubber
- event and disaster management
- extraction of non ferrous metals
- fabric structure - i
- fabric structure -i
- fabric structure-ii
- fabrication of nano- devices
- facilities layout & material handling systems
- facilities planning
- fertilizer technology(department elective - iii)
- fibre physics
- fibre science & elements of textile structure
- field theory
- finance management & cost control
- finite element analysis of mechatronic systems
- finite elements method(department elective ii)
- flexible manufacturing system(department elective - ii)
- flexible manufacturing systems
- flight mechanics
- fluid flow operation
- fluid mechanics
- fluid mechanics & machines
- fluid mechanics and hydraulics
- fluid power engineering
- food & beverage control-i
- food & beverage service management-ii
- food & industrial microbiology
- food and beverage service management-ii
- food chemistry
- food drying & dehydration
- food engineering operations - ii
- food engineering operations-i
- food engineering thermodynamics
- food engineering transport phenomenon
- food fermentation technology
- food ingredients and flavour technology
- food nutrition & biochemistry
- food nutrition & health
- food packaging technology(departmental elective - ii)
- food plant utilities & sanitation
- food process equipment design
- food process instrumentation and control
- food production-ii
- food refrigeration & air - conditioning
- food rheology & sensory evaluation
- food science & nutrition
- food standards and quality assurance
- foundation engineering
- foundry and welding technology
- foundry technology
- front office administration & management
- frp technology and composites
- fuels, furnaces and refractory
- fuels, furnaces, refractories & pyrometry
- fundamental chemical engineering & stoichiometry
- fundamental chemical engineering calculations & stoichiometry
- fundamentals of aeronautics
- fundamentals of air pollution
- fundamentals of automobile systems
- fundamentals of chemical engineering unit
- fundamentals of digital design
- fundamentals of fluid mechanics
- fundamentals of food nutrition
- fundamentals of image processing
- fundamentals of jet propulsion
- fundamentals of machine design
- fundamentals of power electronics
- fundamentals of quality management
- fundamentals of reaction engineering
- fundamentals of solid state technology
- fundamentals of stoichiometry
- fundamentals of structural analysis
- fundamentals of turbo m/cs
- fundamentals of turbo machines
- garment processing
- garment technology(department elective - ii)
- gas dynamics(department elective - i)
- geological exploration mineral deposits(departmental elective - iii)
- geological exploration of mineral deposits
- geology-i
- geology-ii
- geomatics engineering
- geotechnical engineering - i
- geotechnical engineering - ii
- geotechnics & applied geology
- glass facade engineering(departmental elective - iii)
- green chemistry for technologists
- ground water contamination
- harbour & airport engineering(departmental elective - iii)
- heat and mass transfer
- heat and mass transfer in metallurgy
- heat power engineering
- heat transfer
- heat treatment
- helicopter engineering
- high speed aerodynamics(department elective iii)
- high voltage engineering
- highway engineering
- horticultural produce processing
- hospital management & clinical technology
- hospitality & tourism law
- hospitality communication - ii
- hospitality communication ii
- hospitality french
- hotel engineering and maintenance
- human anatomy & physiology
- hydraulic & pneumatic systems
- hydrology & water resources engineering
- image processing
- image processing(departmental elective - ii)
- immunology
- industrial automation
- industrial automation(departmental elective - ii)
- industrial communication system
- industrial communication systems
- industrial control systems(institute elective-ii)
- industrial corrosion & its prevention
- industrial corrosion, testing, prevention & control(department elective -iii)
- industrial data communication
- industrial drafting
- industrial drives & control - i
- industrial drives & control-i
- industrial drives & control-ii
- industrial drives and control
- industrial drives and control - ii
- industrial engineering
- industrial hydraulics and pneumatics
- industrial instrumentation
- industrial instrumentation(departmental elective - ii)
- industrial measurement
- industrial measurement i
- industrial measurement ii
- industrial pollution & control
- industrial safety & maintenance engineering
- industrial statistics & quality management
- industrial tribology
- industrial water pollution & control
- information and network security
- information security
- infrastructure engineering and management
- injection molding technologies
- injection moulding technologies
- insrumentation & process control
- institute elective - disaster management
- instrumentation & process control
- instrumentation and control for bioengineering
- instrumentation for agriculture and food processing(departmental elective - iii)
- instrumentation for bio medical application
- instrumentation measurement - ii
- instrumentation system
- integrated circuits & application
- integrated circuits and applications
- intellectual property rights and bioethics
- inter connected power system
- intermediate communication skills in english
- internal combustion engines
- international cuisine
- internetworking and security
- introduction of profession
- introduction to food processing technology
- introduction to glass & ceramic technology-ii
- introduction to heat transfer
- introduction to medicinal chemistry &biochemistry(elective-i)
- introduction to mining
- introduction to plastic material science
- introduction to virtual biomedical
- introductory biology
- ios programming(departmental elective - iii)
- iot and applications (departmental elective - iii)
- iron making
- irrigation and water resources engineering
- irrigation engineering
- irrigation water management
- kinematics & dynamics of machines
- kinematics and dynamics of machines
- kinematics of machines
- knitting and garment technology
- knitting technology
- latex processing & its application (atkt)
- latex technology
- legislation in environmental protection
- life science-1
- life science-2
- linear electrical networks
- liquid effluent treatment-1
- low temperature process systems for foods
- machine design
- machine design & industrial drafting
- machine design ii
- machine design-i
- machine dynamics
- machine vision
- machineries & equipments
- machining processes
- maintenance & safety engg
- malware analysis
- man made fibre technology
- management - ii
- management information system (department elective - iii)
- management of human resources
- management-1
- managing projects
- managing projects(department elective iii)
- manufacturing & applications of polymeric materials
- manufacturing and assembly drawing
- manufacturing of plastic materials- 1
- manufacturing of plastics material-2
- manufacturing process-1
- manufacturing processes -ii
- manufacturing technology - i
- manufacturing technology - ii
- marketing management
- mass transfer operation - i
- mass transfer operation - ii
- mass transfer operation – i
- mass transfer operation –ii
- material & energy balance calculations
- material degradation and prevention
- material handling systems
- material science
- material science and metallurgy
- material science and technology
- material selection and failure analysis
- materials & manufacture of food equipment
- materials and logistic management
- materials characterization
- materials management
- mathematics-iv
- maths-ii
- measurement & instruments
- mechanical behaviour and testing of materials
- mechanical measurement & metrology
- mechanical operation
- mechanical operations in chemical process industries
- mechanics of composite materials
- mechanics of deformable bodies
- mechanics of solids
- mechatronics
- medical imaging techniques
- medical imaging technology
- medical optics
- medicinal chemistry & physio-pharmacology
- medicinal chemistry-i
- medicinal chemistry-ii & technology of sterile products
- mems and nanotechnology(departmental elective - iii)
- metal cutting & advanced manufacturing processes
- metal forming analysis(department elective - i)
- metal forming processes
- metal forming technology
- metal joining processes
- metal joining technology
- metal working processes
- metallurgical thermodynamics
- metallurgy for non-metallurgists
- metrology and measurement
- micro processors & micro controllers
- microbiology & formulation technology of liquids & topicals
- microcontroller
- microcontroller & interfacing
- microcontroller and interfacing
- microcontroller and interfacing (ec)
- microcontroller for power electronics
- microcontrollers and embedded systems
- microcontrollers for power electronics
- microelectronics and vlsi
- microprocessor & its interfacing
- microprocessor and interfacing
- microprocessor and microcontroller
- microwave engineering
- milk & milk products technology
- mine & mineral economics
- mine hazards
- mine legislation
- mine planning
- mine plannningsurface coating technology (department elective - i)
- mine safety engg.
- mine safety engineering
- mine surface environment
- mine ventilation
- mineral processing
- mining & processing of dimensional stone
- mining machinery - ii
- mining machinery ii
- mining machinery-i
- mobile computing and wireless communication
- modelling & simulation of biological systems
- modelling & simulation of physiological systems
- modelling, simulation and operations research
- modern control systems
- modern control systems(departmental elective - ii)
- modern manufacturing practices
- modern spinning technology
- modern weaving technolgy
- modern yarn production
- modern yarn production technologies
- mold engineering
- mold manufacturing technology(departmental elective - iii)
- molecular biology and genetics
- motion control
- mould manufacturing technology
- multi component distillation
- multi component distillation(department elective - iii)
- municipal and hazardous solid waste management
- municipal and industrial solid waste management
- municipal engineering
- municipal waste & sewage management
- mutlimedia and animation(departmental elective - iii)
- nano ceramic and applications
- nano technology and advanced application of plastics
- nano technology(department elective - ii)
- nanolithography
- nanomagnetism and nanofluids
- nanopolymers and nano-composites
- nanoscience technology and pharmaceutical packaging technology(department elective – x)
- nanotechnology and medicine
- nanotechnology for advanced drug delivery systems
- nanotechnology in healthcare
- natural rubber science & technology
- new functional dyes & recent trends in dyes technology
- new separation techniques
- newer waste water treatment systems
- noise, vibration & harshness and safety
- non - ferrous extractive metallurgy
- non destructive testing
- non-conventional energy sources
- numerical and statistical methods for civil engineering
- numerical methods
- numerical techniques & statistical methods
- object oriented analysis design and uml
- object oriented and programming with c++
- object oriented concepts and programming
- object oriented programming in c++
- object oriented programming with c++
- object oriented programming with java
- occupational health and safety
- oil hydraulics & pneumatics(department elective - i)
- operating system
- operating system design
- operation & maintenance of aircraft
- operation research
- operations planning & control
- optical communication
- optimization methods
- optimization(department elective ii)
- organic chemistry
- organic chemistry and unit processes
- organic chemistry for technologists
- organic chemistry for technologists-i
- organic chemistry for technologists-ii
- parallel processing
- petroleum refining & petrochemicals
- pharmaceutical chemistry
- photonics
- physical & inorganic chemistry
- physical and inorganic chemistry
- physical ceramics
- physical chemistry
- physical metallurgy - i
- physical metallurgy - ii
- physical testing
- physical testing-i
- physical testing-ii
- physico- chemical treatment technologies
- physico-chemical processes
- physics
- physics of nanomaterials
- physiological measurement techniques
- physiological system modelling
- plant design & project engineering
- plastic charaterization techniques
- plastic deformation of metals
- plastic extrusion technology
- plastic industrial hydraulics and pneumatics
- plastic manufacturing technology
- plastic process instrumentation and process control
- plastic processing & machinery
- plastic structure, property & relationship
- plastics manufacturing technology
- plastics mold & die design ii
- plastics packaging technology
- plastics recycling & waste treatment
- pollution control & safety management
- pollution control, safety & health management
- polymer & rubber material-ii
- polymer & rubber materials-i
- polymer chemistry (elective-i)
- polymer reaction engineering and rheology
- powder metallurgy
- power electronic circuits – ii
- power electronic circuits-i
- power electronics
- power electronics - i
- power electronics - ii
- power electronics & control engineering
- power electronics – i
- power electronics – ii
- power electronics and industrial drives
- power electronics applications
- power electronics applications in power system
- power electronics design
- power electronics devices & components
- power electronics devices and circuits
- power electronics systems modelling
- power plant engineering
- power processing circuits - i
- power processing circuits - ii
- power quality and management(departmental elective - ii)
- power quality and management(departmental elective - iii)
- power system analysis
- power system analysis and simulation
- power system operation and control
- power system planning and design
- power system practice and design
- power system protection
- principles of extractive metallurgy
- principles of food engineering
- principles of materials science and physical metallurgy
- principles of power electronics
- principles of process engineering-i
- principles of process engineering-iii
- principles of textile process
- principles of textile processes
- probability and introduction to statistics
- process & quality control in spinning
- process & quality control in weaving
- process calculation
- process calculations in textile wet processing
- process control
- process control systems
- process dynamics and control
- process equipment design -i
- process equipment design -ii
- process equipment design-i
- process equipment design-ii
- process heat transfer
- process modeling, simulation & optimization
- process simulation & optimization
- process technology of drugs & intermediates(department elective - vii)
- product design & development
- product design and value engineering(department elective ii)
- product design concept: structures & additives
- product development & value engineering
- production & applications of colorants & auxiliaries
- production and operations management
- production optimization techniques
- production planning & maintenance
- production technology
- productivity engineering
- productivity improvement methods
- professional practice & valuation
- professional practices & valuation
- programmable automation controller
- programmable logic controller
- programmable logic controller for power electronics(departmental elective iii)
- programmable logic controllers
- programming for problem solving
- programming methodology using c++
- project & plant engineering
- project engineering and management
- project management
- python programming(departmental elective - iii)
- quality and reliability engineering
- quality assurance & reliability
- quality assurance and reliability
- quality control in wet processing (departmental elective - iii )
- quality engineering & management
- quality engineering(department elective iii)
- quality management & reliability engineering
- quantitative techniques in management
- radar & navigational aids
- radar & navigational aids(departmental elective - ii)
- railway , bridge & tunnel engineering
- railway, bridge & tunnel engineering
- rapid prototyping(department elective ii)
- recent advances in manufacturing
- recycling and packaging of polymer and rubber(department elective – x)
- refrigeration and air-conditioning
- regulatory standards for medical devices
- rehabiliation engineering
- rehabilitation engineering
- renewable energy
- renewable energy engineering
- renewable energy sources
- repairs & rehabilitation of concrete structures(departmental elective - iii)
- repairs & rehabilitation of structures
- resort designing, development & management
- resource optimization techniques
- rheology of rubber
- robotics programming and applications
- robotics(department elective iii)
- rock fragmentation
- rock mechanics
- rock slope engineering
- rocket & missile configurations design
- rocket & missile technology
- room division management-ii
- rooms division management-i
- rubber adhesion & adhesion science
- rubber chemistry & natural polymers
- rubber chemistry & natural polymers( department elective-ii)
- rubber compound & product testing
- rubber compounding materials
- rubber engineering
- rubber equipment design-i
- rubber euipment design-ii
- rubber plant & process engineering
- rubber product & process computer aided design
- rubber products manufacturing
- rubber recycling & waste management
- rubber technology
- safety & hygiene in chemical industries
- satellite commmunication(departmental elective - iii)
- satellite communication
- satellite communication & networking
- satellite communication(departmental elective - ii)
- selection of materials and failure analysis
- sensor networks & instrumentation
- service oriented computing (departmental elective - ii)
- signal & systems
- soft computing
- soft computing in control(departmental elective - iii)
- software engineering
- software testing and quality
- soil mechanics
- solid & hazardous wastes - characterization & treatmentmedical optics (department elective - ii)
- solid-fluid operations(department elective - iii)
- space dynamics
- special purpose vehicles
- specialty pigments & recent development in pigment technology(department elective - vii)
- spintronics
- statistical methods and quality control
- statistical quality control & textile costing
- steam and gas turbines
- steel making
- stoichiometry
- strength of materials
- structural analysis - iii
- structural analysis ii
- structural analysis-1
- structural analysis-2
- structural analysis-i
- structural design ii
- structural design-i
- sub-surface environment
- supply chain management(department elective - ii)
- surface coating technology
- surface mine production
- surface ornamentation & fashion art
- surface ornamentation & fashion art(departmental elective iii)
- surveying
- sustainable development & green chemistry (department elective - iii)
- switch gear & fault analysis
- switch gear & protection
- switch gear and protection
- switchgear
- synthesis of nanomaterials-i
- synthesis of nanomaterials-ii
- synthetic rubbers
- system programming
- technical textile-i
- technical textile-ii
- technical textiles ii
- technological advances in textile processing
- technology of denim manufacturing(departmental elective iii)
- technology of dyeing
- technology of dyeing - i
- technology of dyeing - ii
- technology of dyeing - iii
- technology of dyeing -i
- technology of finishing - ii
- technology of grains
- technology of intermediate & colorants
- technology of pigments
- technology of solid dosage forms & medicinal natural products
- telecommunication engineering
- telecommunication switching and applications
- telecommunication switching systems and networks
- testing and commissioning of electrical equipments
- testing and identification of plastic materials
- testing and installation of electrical equipments and systems
- testing and verification
- testing of metals and alloys
- textile & metal reinforcement of elastomers
- textile design & colour
- textile fibers
- textile fibres
- textile manufacturing - i
- textile manufacturing - ii
- textile manufacturing processes
- textile processing - i
- textile processing-ii
- theory of computation
- theory of electromagnetics
- theory of heat transfer
- theory of machines
- theory of vibration
- therapeutic instrumentation
- therapeutic techniques & instrumentation
- thermal engineering
- thermodynamics
- thermodynamics and thermal engineering
- thermodynamics of elastomers & polymers
- thin film technology
- tool design
- tool engineering
- total quality management
- tourism product, design & development
- transducers
- transport management & laws
- transport management and laws
- transport phenomena in materials processing
- treatment process design and drawing
- tribology(department elective iii)
- two & three wheeler technology
- tyre & tube technology
- underground coal mining
- underground metal mining
- unit operations-i
- unit processes in organic synthesis
- urban transportation system
- utilization of electrical energy and traction
- vehicle dynamics
- vehicle maintenance & garage practice
- vehicle maintenance and garage practice
- vehicle testing &homologation
- vibration and noise control
- viscoelasticity of elastomers
- visual basic application & programming
- vlsi design
- vlsi technologies
- vlsi technology & design
- vlsi technology and design
- vulcanization
- water & waste water engineering
- water pollution & control
- weaving - iii
- weaving technology-i
- weaving technology-ii
- weaving technology-iii
- weaving-i
- weaving-ii
- web application development
- web data management
- web data management(departmental elective - iii)
- web technology
- web technology and programming
- welding technology
- wireless communication
- wireless communication & mobile programming
- work system design
- yarn manufacturing - ii
- yarn manufacturing - iii
- yarn manufacturing-i
- yarn manufacturing-ii
- yarn manufacturing-iii
- yarn preparation & weaving
- yarn structure & fabric geometry