Exam Details
Subject | anaerobic biotechnologies | |
Paper | ||
Exam / Course | me | |
Department | ||
Organization | Gujarat Technological University | |
Position | ||
Exam Date | May, 2018 | |
City, State | gujarat, ahmedabad |
Question Paper
Seat No.: Enrolment
GUJARAT TECHNOLOGICAL UNIVERSITY
ME SEMESTER IV EXAMINATION SUMMER 2018
Subject Code: 2741801 Date:- 02/05/2018
Subject Name: Anaerobic Biotechnologies
Time: 02:30 PM To 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q-1
Explain microbiology of anaerobic treatment processes with diagram.
7
Give the difference between anaerobic treatment processes and aerobic treatment processes.
7
Q-2
With help of neat sketches explain the UASB.
7
Calculate the available power per m3 of biogas from 1st principle.
7
OR
Write a short note on Anaerobic Migrating Anaerobic reactor.
7
Q-3
What is the difference between High Rate Anaerobic Reactor and conventional Anaerobic Reactor?
7
Write a short note Waste Stabilization pond with neat sketch.
7
OR
Q-3
Explain sulfide toxicity for anaerobic treatment.
7
What is Biogas Enrichment? Enlist methods of biogas enrichment explain any one in detail
7
4
With the help of diagram explain IC Reactor
7
Give the difference between expanded bed reactor fluidized bed reactor.
7
OR
Q-4
Enlist and explain the environmental variables for anaerobic treatment.
7
What is the difference between up flow down flow anaerobic reactor? Draw a neat sketch of each.
7
Q-5
Write a short note on importance of mixing heating in anaerobic reactor also indicates different facilities for proving mixing heating.
7
Explain Biphasic Anaerobic Reactor with neat sketch.
7
OR
Q-5
Write a short note on BMP Test.
7
Explain causes and control of unbalanced condition in anaerobic reactor.
7
.
GUJARAT TECHNOLOGICAL UNIVERSITY
ME SEMESTER IV EXAMINATION SUMMER 2018
Subject Code: 2741801 Date:- 02/05/2018
Subject Name: Anaerobic Biotechnologies
Time: 02:30 PM To 05:00 PM Total Marks: 70
Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
Q-1
Explain microbiology of anaerobic treatment processes with diagram.
7
Give the difference between anaerobic treatment processes and aerobic treatment processes.
7
Q-2
With help of neat sketches explain the UASB.
7
Calculate the available power per m3 of biogas from 1st principle.
7
OR
Write a short note on Anaerobic Migrating Anaerobic reactor.
7
Q-3
What is the difference between High Rate Anaerobic Reactor and conventional Anaerobic Reactor?
7
Write a short note Waste Stabilization pond with neat sketch.
7
OR
Q-3
Explain sulfide toxicity for anaerobic treatment.
7
What is Biogas Enrichment? Enlist methods of biogas enrichment explain any one in detail
7
4
With the help of diagram explain IC Reactor
7
Give the difference between expanded bed reactor fluidized bed reactor.
7
OR
Q-4
Enlist and explain the environmental variables for anaerobic treatment.
7
What is the difference between up flow down flow anaerobic reactor? Draw a neat sketch of each.
7
Q-5
Write a short note on importance of mixing heating in anaerobic reactor also indicates different facilities for proving mixing heating.
7
Explain Biphasic Anaerobic Reactor with neat sketch.
7
OR
Q-5
Write a short note on BMP Test.
7
Explain causes and control of unbalanced condition in anaerobic reactor.
7
.
Subjects
- 3g & 4g mobile communication
- ad hoc and wireless sensor network
- adaptive signal processing
- additives & compounding
- adv. chem. engg. thermodynamics
- advance air conditioning technology
- advance biomedical imaging
- advance casting technology
- advance control systems
- advance cryptography and information security
- advance database
- advance electrical machines
- advance heat transfer
- advance image processing
- advance industrial drives and control
- advance material technology
- advance oil hydraulic and pneumatic systems
- advance operating system
- advance operation research
- advance production & operation management
- advance signal processing & estimation
- advance stress analysis
- advance topics in textile manufacturing
- advance transport phenomena (atp)
- advance vlsi design
- advanced analytical techniques
- advanced civil engineering materials
- advanced communication networks
- advanced computer architecture
- advanced concrete design
- advanced concrete structures
- advanced construction techniques
- advanced control techniques for electrical machines
- advanced data structures
- advanced design of concrete structures
- advanced design of steel structures
- advanced device drivers - ii
- advanced digital circuit design
- advanced digital communication
- advanced digital signal processing
- advanced digital signal processing and applications
- advanced engineering dynamics
- advanced engineering materials
- advanced fabric manufacturing
- advanced fluid mechanics
- advanced foundation engineering
- advanced geotechnical engineering
- advanced image processing
- advanced internal combustion engine
- advanced kinetics and reaction engineering
- advanced machine design
- advanced mass transfer
- advanced materials processing techniques
- advanced mechanism design
- advanced metrology & experimental techniques
- advanced microcontroller and logic controllers
- advanced power converters
- advanced power electronics
- advanced power electronics devices
- advanced power system protection & switchgear
- advanced power system protection and switchgear
- advanced process optimization
- advanced process synthesis
- advanced reaction engineering
- advanced refrigeration
- advanced refrigeration engineering
- advanced seismic design of structures
- advanced separation processes
- advanced soil mechanics
- advanced solid mechanics
- advanced steel structures
- advanced thermodynamics
- advanced thermodynamics & heat transfer
- advanced thermodynamics and heat transfer
- advanced topics in textile manufacture
- advanced transport processes
- advanced welding technology
- advanced wireless and mobile networks
- advances in concrete technology and sustainable construction practices
- advances in transportation engineering
- advances in wireless communication
- ai techniques
- air & noise pollution control
- air pollution control equipment
- airport system planning and design
- algorithms for vlsi physical design automation
- alternate fuels and energy
- alternative fuels for transportation
- anaerobic biotechnologies
- analog cmos circuit design
- analysis & design of foundation systems
- analytical and numerical methods for structural engg.
- antenna engg. design
- antennas and radiating systems
- application based system for air pollution control management
- application based systems for transport of water & wastewater
- application of nanotechnology in chemical engineering
- application of power electronics in renewable energy conversion
- application of power electronics to power system
- application security
- applied biomechanics
- applied linear algebra
- applied super conductivity
- arm processor architecture and system design
- artificial intelligence
- artificial intelligence and expert systems
- artificial intelligence for information technology
- artificial intelligent application to power system
- asic design
- audio video coding & compression
- automative chassis and body engineering
- automobile maintenance & pollution control
- automobile refrigeration & a/c
- automotive aerodynamics & safety
- basics of transportation engineering
- big data analytics
- biodynamics
- bioelectricity
- biological control system and modelling
- biomass energy conversion
- biomedical image processing
- biomedical signal processing
- bioprocess &biochemical engineering
- biosensors & biomems
- biostatistics
- cad/cam systems
- cfd applications in chemical engineering
- chemical process optimization
- chemical reactor analysis
- chemical system modeling and simulation
- cleaner production in chemical industries (cpci)
- cleaner production in rubber industries
- climate change
- cloud and grid computing
- cloud computing
- cloud security
- cmos circuit design - i
- cmos circuit design - ii
- cognitive radio
- collection and conveyance of water and wastewater
- combustion engineering
- composites material technology
- computational method
- computer aided design
- computer aided machine design
- computer aided manufacturing
- computer aided process planning
- computer aided production management
- computer algorithm
- computer methods in power system analysis
- computer networks
- computer vision
- computerized process control
- concepts in mechatronics engineering
- construction contract management
- construction project management
- construction techniques
- control system theory
- cortex-m4 processor architecture and programming
- cryogenic engineering
- cryogenic fundamentals
- cryogenic plant and equipment
- cryogenic system
- cyber crime, ethics and laws
- cyber forensics
- data center managment
- data communication and networking
- data mining and data warehousing
- data science
- data structure with object oriented programming
- database management system
- database management systems
- date:25/05 /2017
- decision models in management
- design and analysis of experiments
- design and optimization of thermal system
- design for manufacturing and assembly
- design of bridges
- design of experiment
- design of experiment & statistical techniques
- design of heat exchange equipments
- design of heat exchangers
- design of hydraulic structures
- design of language processors
- design of material handling equipments
- design of tall structures
- device drivers - i
- digital control
- digital forensic
- digital image and video processing
- digital image processing
- digital image processing and applications
- digital modulation and coding
- digital protection
- digital signal processing
- digital signal processing algorithms
- digital signal processors: architecture & programming
- digital video processing
- digital vlsi design ii backend (elective i)
- disaster management
- disaster management and mitigation
- discrete time signal processing
- distributed computing and applications
- distributed database application system
- distributed operating system
- docks and harbour engineering
- earth and rockfill dams
- economic evaluation of transportation projects
- economics of energy generation & supply
- electric power distribution system
- electric vehicles
- electrical energy conservation & management
- electrical machine modelling and analysis
- electromagnetic compatibility in power electronics
- elementary machine foundation
- embedded and linux programming
- embedded and vlsi signal processing
- embedded system for instrumentation
- embedded systems
- embedded systems for biomedical applications
- embedded wireless technologies
- emc in power electronics
- energy and mass integration
- energy audit and management
- energy conservation & management
- energy conversion systems
- energy economics and management
- energy efficient electrical systems
- energy management
- energy resources economics and environment
- energy technology
- engineering economics & financial management
- engineering optimization
- english for research paper writing
- environment impact assessment of transportation project
- environmental chemistry & microbiology
- environmental geotechnology
- environmental impact assessment
- environmental legislation
- environmental legislations & management
- environmental modeling
- environmental monitoring
- ethical hacking
- ethical hacking & cyber law
- exergy analysis of thermal systems
- experimental techniques and instrumentations in automobile engineering
- experimental techniques and instrumentations in thermal engineering
- facility planning and design
- facts
- fiber optic communication
- finite element method
- finite element method in structural engineering
- finite element methods
- finite element methods in geotechnical engineering
- first course in optimization techniques
- flexible ac transmission system
- flexible manufacturing system
- flood management
- fluid mechanics and gas dynamics
- fluidization engineering
- fluvial hydraulics
- fundamentals of ic engines and automobiles
- fundamentals of micro mechatronics systems
- geo informatics in construction management
- geo spatial techniques
- geospatial techniques and planning
- geosynthetics and reinforced earth
- ground improvement techniques
- groundwater management
- harmonic measurements and filtration techniques
- hdl based design with programmable logic
- high speed cmos vlsi circuit
- high speed diesel engine
- higher engineering mathematics
- highway materials and construction
- hospital administration & management
- hydraulic & pneumatic systems in automotive vehicles
- hydro system engineering
- hydrogen & fuel cell technology
- hydrology & watershed management
- hydropower engineering
- image processing
- image processing for instrumentation
- indusrial hygine & safety
- industrial biotechnology
- industrial data networks
- industrial drives
- industrial electronics & control
- industrial hygiene & safety
- industrial pollution control
- industrial water & wastewater treatment
- information security
- information system and network security
- information theory & coding
- information theory and coding
- infrastructure & transportation planning
- infrastructure and transportation planning
- infrastructure projects
- intelligent sensor and instrumentation
- intelligent systems and control
- internet technology
- internetworking & application
- introduction to artificial intelligence
- introduction to biomedical engineering
- introduction to cryptography
- introduction to optimization techniques
- it infrastructure management
- it service management
- it systems and management
- lean manufacturing system and implementation
- legal issues in urban planning
- logistic and supply chain management
- logistics and supply chain management
- low temperature measurement and instrumentation
- machine tool design
- machining science
- mathematical and statistical methods in chemical engineering
- mathematical foundation for cyber security
- matrix analysis of framed structures
- matrix methods of structural analysis
- mechanics and manufacturing of compositesautomotive aerodynamics & safety
- mechanics of metal forming
- mechatronics
- mechatronics signal processing
- medical ethics and standards
- medical instrumentation & systems
- metrology & computer aided inspection
- metrology and computer aided inspection
- micro and nano manufacturing system
- microcontrollers and programmable digital signal processors
- microwave integrated circuits
- mixed signal controllers
- mixing of rubbers (mr)
- modeling and analysis of electric machines
- modelling & simulation of rubber processing (msrp)
- modelling and analysis of electrical machines
- modern control systems
- multibody dynamics
- mutli gate transistors
- network defence
- network programming
- neuro computing and applications
- numerical method
- numerical method for computer engineering
- numerical methods and statistical analysis
- numerical methods and statistical analysis for chemical engineering
- numerical methods for civil engineering
- object oriented methodology & design
- object oriented programming and with data structure
- off-shore structures
- oil hydraulics and pneumatics
- oop with java
- operation planning & control techniques
- operations planning and control techniques
- optical networks
- optimization in rubber industries
- optimization techniques for engineers
- optimization theory and practice
- pattern recognization
- pavement design, construction and evaluation
- peripheral system design and interfacing
- petroleum refinery engineering
- physics of mos transistor
- physics of rubber elasticity
- pki and biometrics
- planning history and theory
- planning, scheduling & control of construction projects
- plastic processing technology
- plastics materials
- plastics mould & product design simulations
- plastics packaging technology
- plastics processing technology
- plastics testing technology
- plates and shells
- politics & public policy planning
- politics and public policy planning
- polymer alloys and blends
- polymer blends and alloys
- polymer science and technology
- powder & particulate rubber technology
- powder and particulate technology
- power conditioning
- power converters-i
- power efficient vlsi design
- power electronics
- power electronics – i
- power electronics – ii
- power electronics converters and applications
- power electronics for power system
- power processing circuits
- power quality
- power quality issues and their mitigation techniques in power system
- power system dynamics & control
- power system dynamics and control
- power system modeling and simulation
- power system restructuring
- power system transients
- pressure vessel and piping system design
- prestressed concrete
- probability and random process
- process & quality control in textile
- process auxiliaries and utilities
- process control and optimization
- process intensification & integration (pii)
- process modelling & simulation
- process safety management
- product automation and cnc technology
- product design
- product design for manufacturing
- product development and innovation (major elective-ii)
- production & operation management
- production management systems
- programmable logic controller
- property prediction for mixtures
- public transportation planning
- pwm converter and applications
- quality control and reliability
- quality control and safety management in construction
- quality engineering & six sigma fundamentals
- radar signal processing
- rail transportation system planning & design
- rapid prototyping and tooling
- rapid prototyping, tooling and synergic integration
- real time operating system
- real time operating systems
- regional and mass transportation system planning
- regional planning
- rehabilitation and retrofitting of buildings
- rehabilitation and retrofitting of structures
- remote sensing and its application
- renewable energy engineering
- research methodology
- resources management
- rf and microwave
- rf integrated circuits
- road safety audit
- robotic engineering
- robotic engineering (mechatronics)
- robotics & control
- robotics and artificial intelligence
- robotics and intelligent systems
- robotics engineering
- robust design
- rtl simulation and synthesis with plds
- rubber blends
- rubber bonding & its technology
- rubber cultivation & rubber lattices
- security standards and audit (elective-i)
- semantic web
- sensor signal processing
- sensor technology
- service oriented architecture
- sheet metal process
- signal analysis and transform
- silicon on insulator
- simulation modeling of manufacturing system
- smart antennas for wireless communication
- smart grid technology and applications
- smart sensors and internet of things
- soft computing
- software engineering methodology
- software project management
- soil improvement technology
- soil structure interaction
- solar energy engineering
- solar refrigeration and air conditioning
- solar refrigeration and air-conditioning
- solid & hazardous waste management
- solid state ac drives
- solid state dc drives
- speciality elastomers and its technology
- speech signal processing
- statistical information processing
- statistical signal analysis
- statistical techniques and design of experiment
- statistics for biomedical engineers
- statistics for engineers
- strategic management
- structural dynamics
- structural dynamics and earthquake engineering
- structural optimization
- subject name:
- subsurface investigation & instrumentations
- surface science and nano technology
- sustainable construction practices
- system design
- telecom switching system ,networks and network management
- telecom switching system, networks and network management
- testing and verification of vlsi design
- textured yarn technology
- theory & design of textile machine - i
- theory and applications of cement composites
- theory and design of textile machine i
- theory of elasticity
- theory of elasticity & plasticity
- theory of fabric structures
- theory of thin plates & shells
- theory of yarn manufacture
- theory of yarn structure
- thermal and nuclear power plants
- thermoplastics elastomers
- thermosetting resins & silane technology(trst)
- tool & die design
- total quality management
- traffic engineering
- traffic flow theory and simulation
- transportation facility design
- transportation system management
- treatment process design and drawing
- tribology
- urban governance & development management
- urban housing
- urban planning techniques & practice
- urban transportation systems planning
- vacuum engineering
- value engineering
- verification methodology
- vibration and noise
- video processing
- virtual biomedical instrumentation
- vlsi signal processing
- water and wastewater technologies
- water resource planning
- water supply and drainage
- water use management
- wavelet transform and applications
- wavelet transforms and applications
- web and database security
- wind and small hydro energy system
- wireless & mobile communication
- wireless adhoc network
- wireless and mobile network architectures
- wireless communication
- wireless networking & mobile computing
- wireless sensor network for it
- wireless sensor networks & its energy management
- wireless signal propagation and fading
- work system design and human factors engineering