Exam Details
Subject | engineering graphics | |
Paper | paper 1 | |
Exam / Course | b.tech | |
Department | ||
Organization | Visvesvaraya Technological University | |
Position | ||
Exam Date | 2018 | |
City, State | karnataka, belagavi |
Question Paper
USN 18EG15/25
First Semester B.E. Degree Examination 2018
ENGINEERING GRAPHICS
Time: 3 Hours (COMMON TO ALL BRANCHES) Max. Marks: 100
Note: 1. Answer three full questions 2. Use A4 sheets supplied.
3. Draw to actual scale 4. Missing data, if any, may be assumed suitably.
1. A line AB measuring 70 mm has its end A 15 mm in front of VP
and 20 mm above HP and the other end B is 60 mm in front of VP
and 50 mm above HP. Draw the projections of the line and find the
inclination of the line with both the reference planes of projection.
25 Marks
OR
1. A rectangular lamina of sides 20mm X 30mm rests on HP on one of
its longer edges. The lamina is tilted about the edge on which it rests
till its plane surface is inclined to HP at 450. The edge on which it
rests is inclined at 300 to VP. Draw the projections of the lamina.
25 Marks
2. A Square pyramid 25 mm sides of base and 60 mm axis length rests
on HP on one its corners of the base such that two base edges
containing the corner on which it rests make equal inclinations with
HP. Draw the projections of the pyramid when the axis is inclined
to HP at 400 and to VP at 300.
45 Marks
3. A rectangular prism of base 30mm x 20 mm and height 60 mm rests
on HP on its base with the longer base side inclined at 400 to VP. It
is cut by a plane inclined at 450 to HP, perpendicular to VP and
bisects the axis. Draw the development of the lateral surface of the
prism.
30 Marks
OR
3. A triangular prism base side 30mm and length 70 mm is resting on
rectangular face on top of a square slab of side 70mm and 25 mm
thickness .Draw the isometric projections.
30 Marks
First Semester B.E. Degree Examination 2018
ENGINEERING GRAPHICS
Time: 3 Hours (COMMON TO ALL BRANCHES) Max. Marks: 100
Note: 1. Answer three full questions 2. Use A4 sheets supplied.
3. Draw to actual scale 4. Missing data, if any, may be assumed suitably.
1. A line AB measuring 70 mm has its end A 15 mm in front of VP
and 20 mm above HP and the other end B is 60 mm in front of VP
and 50 mm above HP. Draw the projections of the line and find the
inclination of the line with both the reference planes of projection.
25 Marks
OR
1. A rectangular lamina of sides 20mm X 30mm rests on HP on one of
its longer edges. The lamina is tilted about the edge on which it rests
till its plane surface is inclined to HP at 450. The edge on which it
rests is inclined at 300 to VP. Draw the projections of the lamina.
25 Marks
2. A Square pyramid 25 mm sides of base and 60 mm axis length rests
on HP on one its corners of the base such that two base edges
containing the corner on which it rests make equal inclinations with
HP. Draw the projections of the pyramid when the axis is inclined
to HP at 400 and to VP at 300.
45 Marks
3. A rectangular prism of base 30mm x 20 mm and height 60 mm rests
on HP on its base with the longer base side inclined at 400 to VP. It
is cut by a plane inclined at 450 to HP, perpendicular to VP and
bisects the axis. Draw the development of the lateral surface of the
prism.
30 Marks
OR
3. A triangular prism base side 30mm and length 70 mm is resting on
rectangular face on top of a square slab of side 70mm and 25 mm
thickness .Draw the isometric projections.
30 Marks
Subjects
- additional mathematics – ii
- additional mathematics-i
- advanced calculus and numerical methods
- alternative building materials
- analog and digital communication systems
- analog electronic circuits
- analog electronics
- automobile engineering
- automotive electronics
- basic electrical engineering
- basic electronics i & ii
- c-programming for problem solving
- calculus and linear algebra
- clinical instrumentation – ii
- computer integrated manufacturing
- constitution of india, professional ethics and human rights
- construction management and entrepreneurship
- control engineering
- design for manufacturing
- design of machine elements
- design of steel structural elements
- digital electronics
- digital system design
- electric circuit analysis
- electrical and electronic measurements
- electronic instrumentation
- elements of civil engineering and mechanics
- elements of mechanical engineering
- embedded system design and programming
- energy auditing
- energy engineering
- engineering chemistry
- engineering electromagnetics
- engineering graphics
- engineering mathematics – iv
- engineering mathematics-i
- engineering mathematics-ii
- engineering mathematics-iii
- engineering physics
- environmental protection and management
- finite element method
- finite element method of analysis
- fluid power systems
- heat transfer
- high voltage engineering
- highway engineering
- integration of distributed generation
- kannada kali
- kannada mansu
- machine learning
- matrix method of structural analysis
- mechatronics
- metal forming
- mobile communication
- network analysis
- numerical methods and applications
- oops with c++
- power and industrial electronics
- power system analysis 2
- power system protection
- smart materials & mems
- software application lab
- solid waste management
- technical english – 1
- total quality management
- transformers and generators
- tribology
- water resources management
- water supply and treatment engineering