Exam Details
| Subject | Construction Supervision And Building Maintenance | |
| Paper | ||
| Exam / Course | Diploma In Civil Engineering (DCLEVI) / Advanced Level Certificate In Civil Engineering (ACCLEVI) | |
| Department | School of Engineering & Technology (SOET) | |
| Organization | indira gandhi national open university | |
| Position | ||
| Exam Date | June, 2016 | |
| City, State | new delhi, |
Question Paper
No. of Printed Pages:4 IBICEE-0051
DIPLOMA IN CML ENGINEERING (DCLEVI I DELVI)
Term-End Examination 00906
June, 2016
BICEE-005 CONSTRUCTION SUPERVISION AND BUILDING MAINTENANCE
Time hours Maximum Marks: 70
Note: Question no. 1 is compulsory. Attempt four more questions from the remaining questions no. 2 to 8. All questions carry equal marks.
1. Choose the correct answer for the following questions from the four alternatives: 7x2=14
means removal of excess water from the saturated soil.
Underwatering
Dewatering
Electro-osmosis
Piping
is a thin coat of mortar over brick walls.
Paint
Distemper
Plaster
Laitance
Falling out of plaster from wall can occur due to
lack of adhesion
excessive moisture in background
rapid drying of plaster coats
Any of the above
is the most common thinner used in oil paints.
Turpentine
Benzine
Naptha
Petrol
is the process of drying out the timber to an appropriate moisture content.
Preservation
Decaying
Seasoning
Varnishing
The ease with which the concrete can be mixed, placed and compacted refers to
Durability
Workability
Creep
Elasticity
Progress of work is recorded in
Nominal roll
Muster roll
Measurement book
Quittance roll
2. Discuss the role of construction supervisor, in different phases of a construction project. 7
Write a short note about the interpretation of specifications. 7
3. Explain in detail the basic difference in estimation during feasibility studies and for planning the Bill of Quantities. 14
4. What are the different site registers maintained in a construction site? Discuss in detail any two, with regard to their purpose. 14
5. Write short notes on the following: 2x7=14
Prestressed Concrete
Underwater Concreting
6. Make a list of possible defects in timber. Also explain what do we mean by good timber? 14
7. Discuss in detail the steel manufacturing process. Give an account of simple field tests for structural steel. 14
8. What do you mean by preservation of timber Make a list of various types of preservatives with an account of their advantages and disadvantages.
DIPLOMA IN CML ENGINEERING (DCLEVI I DELVI)
Term-End Examination 00906
June, 2016
BICEE-005 CONSTRUCTION SUPERVISION AND BUILDING MAINTENANCE
Time hours Maximum Marks: 70
Note: Question no. 1 is compulsory. Attempt four more questions from the remaining questions no. 2 to 8. All questions carry equal marks.
1. Choose the correct answer for the following questions from the four alternatives: 7x2=14
means removal of excess water from the saturated soil.
Underwatering
Dewatering
Electro-osmosis
Piping
is a thin coat of mortar over brick walls.
Paint
Distemper
Plaster
Laitance
Falling out of plaster from wall can occur due to
lack of adhesion
excessive moisture in background
rapid drying of plaster coats
Any of the above
is the most common thinner used in oil paints.
Turpentine
Benzine
Naptha
Petrol
is the process of drying out the timber to an appropriate moisture content.
Preservation
Decaying
Seasoning
Varnishing
The ease with which the concrete can be mixed, placed and compacted refers to
Durability
Workability
Creep
Elasticity
Progress of work is recorded in
Nominal roll
Muster roll
Measurement book
Quittance roll
2. Discuss the role of construction supervisor, in different phases of a construction project. 7
Write a short note about the interpretation of specifications. 7
3. Explain in detail the basic difference in estimation during feasibility studies and for planning the Bill of Quantities. 14
4. What are the different site registers maintained in a construction site? Discuss in detail any two, with regard to their purpose. 14
5. Write short notes on the following: 2x7=14
Prestressed Concrete
Underwater Concreting
6. Make a list of possible defects in timber. Also explain what do we mean by good timber? 14
7. Discuss in detail the steel manufacturing process. Give an account of simple field tests for structural steel. 14
8. What do you mean by preservation of timber Make a list of various types of preservatives with an account of their advantages and disadvantages.
Other Question Papers
Departments
- Centre for Corporate Education, Training & Consultancy (CCETC)
- Centre for Corporate Education, Training & Consultancy (CCETC)
- National Centre for Disability Studies (NCDS)
- School of Agriculture (SOA)
- School of Computer and Information Sciences (SOCIS)
- School of Continuing Education (SOCE)
- School of Education (SOE)
- School of Engineering & Technology (SOET)
- School of Extension and Development Studies (SOEDS)
- School of Foreign Languages (SOFL)
- School of Gender Development Studies(SOGDS)
- School of Health Science (SOHS)
- School of Humanities (SOH)
- School of Interdisciplinary and Trans-Disciplinary Studies (SOITDS)
- School of Journalism and New Media Studies (SOJNMS)
- School of Law (SOL)
- School of Management Studies (SOMS)
- School of Performing Arts and Visual Arts (SOPVA)
- School of Performing Arts and Visual Arts(SOPVA)
- School of Sciences (SOS)
- School of Social Sciences (SOSS)
- School of Social Work (SOSW)
- School of Tourism & Hospitality Service Sectoral SOMS (SOTHSM)
- School of Tourism &Hospitality Service Sectoral SOMS (SOTHSSM)
- School of Translation Studies and Training (SOTST)
- School of Vocational Education and Training (SOVET)
- Staff Training & Research in Distance Education (STRIDE)
Subjects
- Advanced Steel Design
- Air Quality Monitoring And Control
- Analysis And Design Of Bridges
- Construction Supervision And Building Maintenance
- Earthquake Engineering
- Earthquake Resistant Design Of Structure
- Elements Of Soil Dynamics And Machine Foundation
- Environment Impact Analysis Of Civil Engineering Projects
- Irrigation Engineering
- Prestressed Concrete
- Remote Sensing In Civil Engineering
- Solid And Hazardous Waste Management
- Structural Optimization
- Water Power Engineering