|
TO BE PUBLISHED IN THE EMPLOYMENT NEWS / ROZGAR SAMACHAR DATED 01-03-2014
STAFF SELECTION COMMISSION Date of Exam: 25.05.2014 Closing Date : 28.03.2014 NOTICE
GOVERNMENT STRIVES TO HAVE A WORKFORCE WHICH REFLECTS GENDER BALANCE AND WOMAN CANDIDATES ARE ENCOURAGED TO APPLY.
JUNIOR ENGINEERS (CIVIL, MECHANICAL, ELECTRICAL,QUANTITY SURVEYING AND CONTRACT) EXAMINATION, 2014
F.No. 3/1/2014- P&P-II: Staff Selection Commission will hold on Sunday, the 25.05.2014, an open competitive examination all over the country for recruitment to the post of Junior Engineer (Civil & Electrical ) in CPWD and Department of Posts, Junior Engineer(Civil/Electrical/Mechanical) in Border Roads Organisation (BRO) of Ministry of Defence, Junior Engineer (Civil & Mechanical) in CWC and Farakka Barrage and Junior Engineer (Civil, Mechanical, Electrical and Quantity Surveying and Contracts) in MES, a Group B Non-Gazetted, Non Ministerial post, classified as General Central Service (Technical) in the Pay Band of Rs.9300-34800/- plus Grade Pay Rs.4200/-,
2. VACANCIES / RESERVATION : Firm number of vacancies will be determined in due course.
(ii) Reservation for SC/ ST/ OBC/ ExS/ PH etc. categories is available as per extant Govt. Orders and as communicated by the departments reporting vacancies. (iii) The posts carry All India Service Liability (AISL) i.e. the candidate, on selection, may be asked to serve anywhere in the country. (iv) The posts have been identified suitable for the persons suffering from disabilities of forty percent and above of One Arm (OA), One Leg (OL), Both Legs (BL), Partially Deaf (PD) and Deaf (D).
3. NATIONALITY / CITIZENSHIP A candidate must be either: (a) a citizen of India, or (b) a subject of Nepal, or (c) a subject of Bhutan, or (d) a Tibetan refugee who came over to India before the 1st January 1962 with the intention of permanently settling in India, or (e) a person of Indian origin who has migrated from Pakistan, Burma, Sri Lanka, East African countries of Kenya, Uganda, the United Republic of Tanzania(Formerly Tanganyika and Zanzibar), Zambia, Malawi, Zaire, Ethiopia and Vietnam with the intention of permanently settling in India. Provided that a candidate belonging to categories (b), (c), (d) and (e) above shall be a person in whose favour a certificate of eligibility has been issued by the Government of India. A candidate in whose case a certificate of eligibility is necessary may be admitted to the Examination but the offer of appointment will be given only after the necessary eligibility certificate has been issued to him by the Government of India. 4(A). AGE LIMIT as on 1st January 2014 (01-01-2014).
Note I : As per extant Government Orders, the crucial date for age-limit is reckoned from to 01.01.2014. Candidates should note that the Date of Birth as recorded in the Matriculation/Secondary Examination Certificate or an equivalent certificate only will be accepted by the Commission for determining the age and no subsequent request for its change will be considered or granted.
Note.II: Candidates are advised to opt only for such posts for which they are within the prescribed age limits.
4.(B) Permissible relaxation of Upper age limit prescribed under para 4(A) above and Category Codes for claiming age relaxation as on date of reckoning:-
NOTE-I: Ex.Servicemen who have already secured employment in civil side under Central Government on regular basis after availing of the benefits of reservation given to ex-servicemen for their re-employment are NOT eligible for fee concession. However, they are eligible for age relaxation, as per rules.
NOTE-II : The period of "Call up Service" of an Ex-Serviceman in the Armed Forces shall also be treated as service rendered in the Armed Forces for purpose of age relaxation, as per rules.
NOTE-III : The post of Junior Engineer being a Group B post, there is no reservation for Ex-Servicemen category. However, benefit of age-relaxation will be admissible to Ex-Servicemen candidates, as per extant Govt. Orders. EXPLANATION-I : An Ex-Serviceman means a person who has served in any rank whether as a combatant or non-combatant in the Regular Army, Navy, Air Force of the Indian Union, and (i) who retired from such service after earning his/her pension. This would also include persons who are retired/retire at their own request but after having earned their pension; or (ii) who has been released from such service on medical grounds attributable to military service/circumstances beyond his control and awarded medical or other disability pension; or (iii) who has been released, otherwise than on his own request from such service as a result of reduction in establishment; or (iv) who has been released from such service after completing the specific period of engagements, otherwise than at his own request or by way of dismissal or discharge on account of misconduct or inefficiency, and has been given a gratuity; and includes personnel of the Territorial Army of the following categories, namely:- (a) Pension holders for continuous embodied service, (b) Persons with disability attributable to military service; and (c) Gallantry award winners.
EXPLANATION-II : The persons serving in the Armed Forces of the Union, who on retirement from service, would come under the category of ex-serviceman may be permitted to apply for re-employment one year before the completion of the specified terms of engagement and avail themselves of all concessions available to ex-servicemen but shall not be permitted to leave the uniform until they complete the specified term of engagement in the Armed Forces of the Union.
NOTE-IV: AGE CONCESSION IS NOT ADMISSIBLE TO SONS, DAUGHTERS AND DEPENDENTS OF EX-SERVICEMEN
4 (C). PROCESS OF CERTIFICATION AND FORMAT OF CERTIFICATES: Candidates who wish to be considered against vacancies reserved or seek age-relaxation must submit requisite certificate from the competent authority, in the prescribed format, whenever such certificates are sought by concerned Regional/Sub Regional Offices at the time of Interview/Skill Test/Document Verification. Otherwise, their claim for SC/ ST/ OBC/ PH/ ExS status will not be entertained and their candidature/ applications will be considered under General (UR) category. The formats of the certificates are annexed. Candidates claiming OBC status may note that certificate on creamy layer status should have been obtained within three years before the closing date for receipt of application. The Commission has decided to accept OBC certificate in the prescribed format issued after the closing date of receipt of application but issued on or before the date of completion of last tier of examination i.e. Interview/Skill Test/Document Verification as applicable in the concerned SSC Regional Office as valid proof of belonging to non-creamy layer of OBC.
NOTE I : Candidates are warned that they may be permanently debarred from the examination conducted by the Commission in case they fraudulently claim SC/ST/OBC/ExS/PH status.
5. MINIMUM ESSENTIAL EDUCATIONAL QUALIFICATIONS (As on 01-01-2014):
For list of equivalent qualifications as approved by CPWD/AICTE, refer to Annexure-X.
NOTE-I: As per Ministry of Human Resource Development Notification No. 44 dated 01.03.1995 published in Gazette of India edition dated 08.04.1995, the Degree obtained through open Universities/Distance Education Mode needs to be recognized by Distance Education Council, IGNOU. Accordingly, unless such Degrees had been recognized for the period when the candidates acquired the relevant qualification, they will not be accepted for the purpose of Educational Qualification.
NOTE-II: Candidates who have not acquired the educational qualification as on (01-01-2014) will not be eligible and need not apply.
NOTE-III: All candidates who are called for appearing at the Interview will be required to produce the relevant Certificates in Original such as Mark sheets, Provisional Degree/Diploma Certificate, etc. As proof of having acquired the minimum educational qualification on or before 01-01-2014 failing which the candidature of such candidate will be cancelled by the Commission. The candidates who are able to prove, by documentary evidence that the result of the qualifying examination was declared on or before the cut off date and he/she has been declared passed, will also be considered to have met the required Educational Qualification.
NOTE-IV: ExS who have done various courses from Armed Forces which are certified by competent Authority to be equivalent to Diploma in Civil/Mechanical/Electrical Engineering are eligible to appear in the Examination.
6. MODE OF PAYMENT OF FEE PAYABLE Rs.100/- (Rupees One Hundred only):
(i) CANDIDATE MAY NOTE THAT ONLY ON LINE APPLICATIONS WILL BE ACCEPTED AT http:// ssconline.nic.in and http://ssconline2.gov.in (ii) The candidates should pay the requisite fee only through State Bank of India either in the form of Challan or through SBI net banking. Women candidates and candidates belonging to Scheduled Caste, and Scheduled Tribes, Physically handicapped and Ex-Servicemen eligible for reservations are exempted from payment of fee.
NOTE I: Fee once paid will not be refunded under any circumstances.
7. CENTRES OF EXAMINATION: A candidate must indicate the centre in the Application Form in respect of the Examination. A candidate must address the correspondence to the concerned Regional/Sub Regional Office of the Commission under whose jurisdiction the Centre selected by him / her falls. The applications should be addressed to the Regional / Sub-Regional Offices of the Commission as indicated in the table below:-
NOTE I: No change of Centre of Examination will be allowed under any circumstances. Hence, the candidates should select the centres carefully and indicate the same correctly in their applications. The Commission considers only applications supported by documentary evidence from those serving in Armed Forces or Central Armed Police Forces for change of centre, if they are posted out due to operational reasons.
NOTE II: The Commission reserves the right to cancel any Centre and ask the candidates of that centre to appear from another centre. Commission also reserves the right to divert candidates of any centre to some other Centre to take the examination.
8. SCHEME OF EXAMINATION:
The examination will be conducted in two stages: A. Written Test (500 marks) B. Interview ( 100 marks) Written Test:
NOTE-1: In Paper-I and Paper-II for General Engineering, the candidate will be required to attempt only one part i.e. Part-A or Part-B or Part-C as per option given in the application form by the candidate. In other words, the candidates appearing for the post of Junior Engineer (Civil), Junior Engineer(Quantity Surveying & Contract) should attempt Part A (Civil & Structural) of Paper-I and Paper-II and the candidates appearing for the post of Junior Engineer (Electrical) should attempt Part-B (Electrical) and the candidates appearing for the post of Junior Engineer (Mechanical) should attempt Part C ( Mechanical) of Paper-I and Paper-II failing which he/she would be awarded ZERO marks.
NOTE-2: Candidates are allowed to bring their own SlideRule, Non Programmable Calculator, Logarithm Tables and Steam Table for Paper-II only. They are not allowed to use such aids for Paper-I.
NOTE-3: Paper-I will consist of Objective Type Multiple Choice questions only. Answer- sheets of Paper-II (Conventional Type) will be evaluated in respect of only those candidates who qualify in Paper-I at the standard as decided/fixed by the Commission at its discretion.
Note-4: Candidates are not permitted to use Mobile Phone or any other electronic / electrical device other than those specifically permitted in Note-2. Candidates must not, therefore, bring Mobile Phone or any other electronic /electrical device not specifically permitted inside the Examination premises. Possession of these items, whether in use or not, will be considered as use of unfair means in the Examination and candidature of such candidates will be cancelled forthwith. Such candidates are also liable for debarment upto a period of 5 years and/or criminal prosecution.
Note-5: There will be negative marking of 0.25 marks for each wrong answer in Paper-I. Candidates are, therefore, advised to keep this in mind while answering the questions.
Note-6: Commission will place the answer keys of Paper-I on its website in about 7 days of the Examination. Objections and claims if any, received within the time limit specified while placing answer keys will be examined by the Commission with the help of experts, if necessary.
B. Interview: 100 marks
NOTE-I: Only those candidates who secure at least the minimum qualifying marks in the written examination as may be fixed by the Commission at its discretion, will be eligible to appear in the Interview. The interview will be held at places as may be decided by the Commission.
NOTE-II: SC/ST candidates called for interview will be paid TA as per Government Orders. However, no TA is payable to any candidate for appearing in the written examination.
NOTE-III: Canvassing in any form whatsoever will lead to cancellation of the candidates.
Note-IV: The Commission, at its discretion may fix different minimum qualifying marks in interview for General and Reserved category candidates.
9. SYLLABUS The standard of the questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical) from a recognized Institute, Board or University recognized by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below:
Paper-I
(i) General Intelligence & Reasoning: The Syllabus for General Intelligence would include questions of both verbal and non-verbal type. The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgement, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series etc. The test will also include questions designed to test the candidates abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.
(ii) General Awareness: Questions will be aimed at testing the candidates general awareness of the environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline.
(iii) General Engineering (Civil and Structural), (Electrical & Mechanical):
Part-A
Civil Engineering
Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering.
Structural Engineering Theory of Structures, Concrete Technology, RCC Design, Steel Design.
Part-B
Electrical Engineering
Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics.
Part-C
Mechanical Engineering Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials,
Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication, Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines.
Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steels.
Paper II
Part-A
Civil & Structural Engineering
Civil Engineering
Building Materials : Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes.
Estimating, Costing and Valuation : estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering. Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpsons rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.
Surveying : Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment.
Soil Mechanics : Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterbergs limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.
Hydraulics : Fluid properties, hydrostatics, measurements of flow, Bernoullis theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.
Irrigation Engineering : Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining types and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedys theory of critical velocity. Laceys theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India.
Transportation Engineering : Highway Engineering cross sectional elements, geometric design, types of pavements, pavement materials aggregates and bitumen, different tests, Design of flexible and rigid pavements Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety.
Environmental Engineering : Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management types, effects, engineered management system. Air pollution pollutants, causes, effects, control. Noise pollution cause, health effects, control.
Structural Engineering
Theory of structures : Elasticity constants, types of beams determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.
Concrete Technology : Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.
RCC Design : RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).
Steel Design : Steel design and construction of steel columns, beams roof trusses plate girders.
Part-B
Electrical Engineering
Basic concepts : Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units. Circuit law : Kirchhoffs law, Simple Circuit solution using network theorems. Magnetic Circuit : Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self and mutual induction.
AC Fundamentals : Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit.
Measurement and measuring instruments : Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection.
Electrical Machines : (a) D.C. Machine Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines. (b) 1 phase and 3 phase transformers Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency. Effect of voltage, frequency and wave form on losses. Parallel operation of 1 phase /3 phase transformers. Auto transformers. (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors. Methods of braking, effect of voltage and frequency variation on torque speed characteristics.
Fractional Kilowatt Motors and Single Phase Induction Motors : Characteristics and applications.
Synchronous Machines - Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors.
Generation, Transmission and Distribution Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switchgears rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system. Cable Different type of cables, cable rating and derating factor.
Estimation and costing : Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing practices and IE Rules.
Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors.
Basic Electronics : Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices.
Part- C
Mechanical Engineering
Theory of Machines and Machine Design
Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts V-belts and Flat belts, Clutches Plate and Conical clutch, Gears Type of gears, gear profile and gear ratio calculation, Governors Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots.
Engineering Mechanics and Strength of Materials
Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns Eulers and Rankins theories, Thin walled pressure vessels.
Thermal Engineering
Properties of Pure Substances : p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status. Definition of dryness fraction of steam, degree of superheat of steam. H-s chart of steam (Molliers Chart).
1st Law of Thermodynamics : Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation. 2nd Law of Thermodynamics : Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes. Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility.
Air standard Cycles for IC engines : Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.
IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication. Rankine cycle of steam : Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work.
Boilers; Classification; Specification; Fittings & Accessories : Fire Tube & Water Tube Boilers.
Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeraton Plant; Nozzles & Steam Turbines
Fluid Mechanics & Machinery
Properties & Classification of Fluid : ideal & real fluids, Newtons law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids.
Fluid Statics : Pressure at a point.
Measurement of Fluid Pressure : Manometers, U-tube, Inclined tube.
Fluid Kinematics : Stream line, laminar & turbulent flow, external & internal flow, continuity equation.
Dynamics of ideal fluids : Bernoullis equation, Total head; Velocity head; Pressure head; Application of Bernoullis equitation.
Measurement of Flow rate Basic Principles : Venturimeter, Pilot tube, Orifice meter.
Hydraulic Turbines : Classifications, Principles.
Centrifugal Pumps : Classifications, Principles, Performance.
Production Engineering
Classification of Steels : mild steal & alloy steel, Heat treatment of steel, Welding Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.
10. GENERAL INSTRUCTIONS TO BE COMPLIED BY THE CANDIDATES IN THE WRITTEN EXAMINATION:
Note-I: Paper-II of only such candidates who are shortlisted on the basis of their performance in Paper-I will be evaluated.
Note-2: The Commission will fix separate qualifying standards in Paper-II of the written examination.
11. MODE OF SELECTION: Candidates will be shortlisted for Interview on the basis of their total marks in the Written Examination subject to Note-I and 2 below para 10. Candidates who qualify for Interview will be recommended for appointment by the Commission on the basis of total marks in the Written Examination and Interview.
Provided that SC, ST, OBC and PH (OH/HH) candidates, who are selected on their own merit without relaxed standards, along with candidates belonging to other communities, will not be adjusted against the reserved share of vacancies. Such SC, ST, OBC and PH candidates will be accommodated against the general/unreserved vacancies as per their position in the overall Merit List. The reserved vacancies will be filled up separately from amongst the eligible SCs, STs, OBCs and PH candidates which will thus comprise of SC, ST, OBC and PH candidates who are lower in merit than the last general candidate on merit list of unreserved category but otherwise found suitable for appointment even by relaxed standard. A Physically Handicapped category candidate who qualifies on the basis of relaxed standards viz., age limit, experience or qualifications, permitted number of chances in written examination, extended zone of consideration, etc. will be counted against reserved vacancies and not against general vacancies subject to fitness of such candidate for selection. Such candidates may also be recommended at the relaxed standards to the extent the number of vacancies reserved for them, to make up for the deficiency in the reserved quota, irrespective of their rank in the order of merit.
Success in the examination confers no right of appointment unless government is satisfied after such enquiry as may be considered necessary that the candidate is suitable in all respects of appointment to the service/post.
NOTE-I: The candidates applying for the examination should ensure that they fulfil all the eligibility conditions for admission to the examination. Their admission at all the stages of examination will be purely provisional, subject to their satisfying the prescribed eligibility conditions. If, on verification, at any time before or after the written examination and skill test, it is found that they do not fulfil any of the eligibility conditions, their candidature for the examination will be cancelled by the Commission.
NOTE-II: Candidates, who are appointed on the basis of this examination, shall be on probation for a period of two years and during the period of probation, the candidates would be required to undergo such training or pass such examinations as prescribed by the Controlling Authority. On successful completion of the period of probation, the candidates shall, if considered fit for permanent appointment, be confirmed to their post by the Controlling Authority.
12. RESOLUTION OF TIE CASES In cases where more than one candidate secure the equal aggregates marks, tie will be resolved by applying the following methods one after another:-
(i) Total marks in written examination. (ii) Marks in Paper-II. (iii) Marks in Paper-I. (iv) Date of birth, with older candidates placed higher. (v) Alphabetical order in the first names of the candidates appear.
13. HOW TO APPLY All applications must be submitted online only. For detailed instructions relating to the application form and how the application is to be submitted, Annexure II A may be referred to. 14. Preference (A): Preferences for Posts & Departments/Offices A candidate is required to indicate at Sl. No. 13 in his/her Application Form, name of Post for which he/she would like to be considered for FINAL ALLOTMENT in order of preferences in case he/she is recommended by the Staff Selection Commission. Allocation of Posts to the selected candidates will be made strictly keeping in view their position in the merit list and the order of preference, subject to number of vacancies available in that post. The posts for the purpose are grouped and codes as below:-
Note : Candidates may note that options once exercised are final and no change will be allowed under any circumstance.
15. ADMISSION TO THE EXAMINATION All candidates who apply in response to this advertisement by the CLOSING DATE will be assigned Roll numbers. These will be communicated to them or placed on the website of the concerned Regional Office at least two weeks before the date of the examination. A candidate must write his/her Roll number along with his/her name, date of birth and name of the examination while addressing any communication to the concerned regional office of the Commission. Communication from the candidate not furnishing these particulars shall not be entertained.
Admission Certificates (ACs) for the Examination indicating the time table and also venues of examination for each candidate will be issued to all applicants about two weeks before the date of examination. IF ANY CANDIDATE DOES NOT RECEIVE ADMISSION CERTIFICATE FOR THE EXAMINATION ONE WEEK BEFORE THE DATE OF EXAMINATION, HE/SHE MUST IMMEDIATELY CONTACT THE CONCERNED REGIONAL/SUB REGIONAL OFFICE (S) OF THE COMMISSION WITH DETAILS SUCH AS REGISTRATION ID, TRANSACTION ID OF SBI, COPY OF CHALLAN ETC FOR OBTAINING THE ADMISSION CERTFICATES. FAILURE TO DO SO WILL DEPRIVE HIM/HER OF ANY CLAIM FOR CONSIDERATION. CANDIDATES ALSO HAVE THE OPTION TO DOWNLOAD THE ADMISSION CERTIFICATES FROM THE CONCERNED REGIONAL/SUB REGIONAL OFFICES WEBSITE. SUCH FACILITY WILL BE AVAILABLE ABOUT TWO WEEKS BEFORE THE EXAMINATION.
16. COMMISSIONS DECISION FINAL The decision of the Commission in all matters relating to eligibility, acceptance or rejection of the applications, penalty for false information, mode of selection, conduct of examination(s) and interviews, allotment of examination centres, selection and allotment of posts/organizations to selected candidates will be final and binding on the candidates and no enquiry/correspondence will be entertained in this regard.
17. Action against candidates found guility of misconduct: Candidates are warned that they should not furnish any particulars that are false or suppress any material information while filling in the application form. Candidates are also warned that they should in no case attempt to alter or otherwise tamper with any entry in a document or the attested certified copy submitted by them nor should they submit a tampered/fabricated document. If there is any inaccuracy or any discrepancy in filling OMR sheet, they will be awarded ZERO.
Without prejudice to criminal action/debarment from Commissions examination wherever necessary, candidature will be summarily cancelled at any stage of the recruitment in respect of candidates found have indulged in any of the following:-
18. Candidates who have not affixed their signature or LTI or who have not written or coded detailed such as Name, Roll Number, Ticket Number and Test Form Numbers or not furnished the declaration/certificate on Page-I of the OMR answer sheet in Paper-I will be awarded ZERO mark.
19. COURTS JURISDICTION Any dispute in regard to this recruitment will be subject to courts/tribunals having jurisdiction over the Headquarter of concerned Regional/Sub-Regional Office of the SSC where the candidate has submitted his/her application.
20. For detailed instructions relating to Application form, instructions for filling up the application form and for on-line payment/submission of application, candidates are advised to refer Annexures-I, II A and II B.
Annexure II A BROCHURE
INSTRUCTIONS FOR FILLING UP THE APPLICATION
I. The Commission uses standard application form for all its examinations. Therefore, in your own interest please read the instructions given in the Notice of Examination and also given below carefully before filling up the application form. . II. Use only blue/black ball pen to write in the boxes, i.e., 
III. Instructions have been given for most items in the application itself which should be gone through carefully before filling up the boxes. For items for which instructions are not available, further instructions given below may be gone through carefully. IV. Please go through the instructions given below for filling up each item numbered in the application form:- Column 1 and 2 : Name of the Examination Centre and 2. Centre Codes Refer to para-7 of the Notice of the Examination. Column 12,12.1 &12.2:. Code for seeking age relaxation. Refer to para 4 B of the Notice of the Examination. Column 13 : Preference for Posts You are advised to opt for such posts/Departments (Refer Para 14A) for which you have the requisite qualification. You are also advised to be careful in exercising your preference as in the event getting selected you will be considered for the post and Department in order of your merit and option for each post. Option once exercised will be final and no changes/additions will be allowed under any circumstances. Column 15: Candidates should indicate whether they belong to one of the minority communities notified by Government namely Muslims, Christians, Sikhs, Buddhists, or Zoroastrians (Parsis). Column 17. Educational Qualification and Subject Code: See Annexure VIII Use Others if any particular Educational Qualification or Subject is not assigned a code.
Column 19. Address for communication Write your complete communication address including your Name in English in capital letters. Do not forget to write 6 digits PIN code in the boxes. All the correspondence will be made to this address. Column 19.1 : E-mail ids/mobile nos are used for communicating with the candidates in emergencies. Commission is also examining whether Admission certificates for Written examination, and Interview can be sent through e-mail/SMS. It is in the interest of the candidates to furnish these details.
Column 21. Signature of Candidate (Wherever required)
Annexure-II B Procedure for Online Submission of Application
On-line application will be available as below:- Part-I Registration: Up to 5.00 PM on 26-03-2014. Part-II Registration: Up to 5.00 PM on 28-03-2014.
2. The online submission of the application may be made at website http://ssconline .nic.in and http://ssconline2.gov.in Candidate should read the instructions in this Notice carefully before making any entry or selecting options. Candidate should supply all the required details while filling up the online form. Mandatory fields are marked with * (asterisk) sign. The filling of online application contains two parts: Part I Registration Part II Registration
3. In Part I registration, candidate will have to fill basic information. On submission of details, candidate shall be prompted to check the details and make any correction in the application.
4. Candidate should press I agree button after declaration once after he/she finds that information supplied by him/her is in order and no correction is required. Thereafter no correction/modification etc. shall be allowed.
5. Then a page with Registration No. shall be generated. Note down registration number or take out the print out of the page. The application procedure is incomplete without part II registration. Part II registration requires filling of payment details, uploading of photograph and scanned signature. Candidates may note that the Registration number given by the Commission and Transaction ID of the Bank should be properly entered in the relevant space, failing which it will not be possible to link the payment with Part I registration. On-line application will be complete only if scanned signature and photo are uploaded as per instructions.
6. Candidates who have to pay application fee can pay fee online through SBI net banking or cash through SBI bank challan.
7. To pay fee in cash, candidate should take print-out of challan generated online after completion of part I registration. Deposit the requisite fee in pay branch of State Bank of India and then continue with the Part II registration.
8. Those who want to pay online through SBI net banking, can go directly to part II registration after completion of part I. Candidate will have to supply registration number and date of birth to continue to Part II registration.
9. As approval of the Controller General of Accounts, Ministry of Finance, is awaited for use of credit cards/ debit cards, since December 2009, payment through these modes will not be available.
10. Those who are exempted from payment of fee can skip steps 6 to 8.
11. Then upload a recently taken scanned photograph in 8 bit JPG format. The digital size of the file must be less than12 kb and greater than 4 kb and of resolution 100 pixel widths by 120 pixels height.
12. Then upload your scanned signature in 8 bit JPG format. The digital size of the file must be less than 12 kb and greater than 1 kb and of resolution 140 pixel width by 60 pixels height.
13. Candidates are advised to go through the instructions carefully before filling up the application form.
14. Request for change/correction in any particular in the Application Form shall not be entertained under any circumstances. The Staff Selection Commission will not be responsible for any consequence arising out of non acceptance of any correction/addition/deletion in any particular filled in application form whatever the reasons may be.
ANNEXURE VIII Essential Educational Qualification Code
Annexure-IX Subject Code for Educational Qualification
Annexure-X List of Equivalent Qualifications
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Important Dates
| Start Date | End Date | |
|---|---|---|
| Applications | 01-Mar-2014 | 28-Mar-2014 |
| Examinations (Mains) | 25-May-2014 |
Notification Issued By
- Organization : Staff Selection Commission
- Organization City, State : , delhi
- Organization Website : http://ssc.nic.in
- Notification
- General Information
- Important Dates
- How To Apply
- Applications
- Exam Fees
- Eligibility
- Educational Qualifications
- Age Limits
- Reservations
- Posts / Positions / Services
- Job Vacancies List
- Examination Centres
- Plan Of Examination
- Exam Syllabus
- Exam Instructions
- Previous Question Papers
- Interview Questions
- Interview Experience
- Results