TELANGANA STATE PUBLIC SERVICE COMMISSION: HYDERABAD

NOTIFICATION NO. 31/2017. Dt.02/06/2017

ASSISTANT EXECUTIVE ENGINEERS IN VARIOUS ENGINEERING SERVICES

(GENERAL RECRUITMENT)

PARA - I:

1. Applications are invited Online from qualified candidates through the proforma Application to be made available on Commission's WEBSITE (www.tspsc.gov.in) to the post of Assistant Executive Engineers in Various Engineering Services in the State of Telangana.

   1. Submission of ONLINE applications from Dt.06/06/2017

   2. Last date for submission of ONLINE applications Dt. 11/07/2017

   3. Hall Tickets can be downloaded 07 days before commencement of Examination.

2. The Examination (Objective Type) is likely to be held on Dt.05/08/2017 F.N & A.N 06/08/2017 F.N. The Commission reserves the right to conduct the Examination either COMPUTER BASED RECRUITMENT TEST (CBRT) or OFFLINE OMR based Examination of objective type.

   Before applying for the posts, candidates shall register themselves as per the One Time Registration (OTR) through the Official Website of TSPSC. Those who have registered in OTR already, shall apply by login to their profile using their TSPSC ID and Date of Birth as provided in OTR.

   IMPORTANT NOTE: Candidates are requested to keep the details of the following documents ready while uploading their OTR Applications.

   1. Aadhar number

   2. Educational Qualification details i.e., SSC, INTERMEDIATE, DEGREE, POST GRADUATION etc. and their Roll numbers, Year of passing etc.

   3. Community/ Caste Certificate obtained from Mee Seva/ E Seva i.e., Enrollment number and date of issue for uploading in OTR.

3. The candidates who possess requisite qualification may apply online by satisfying themselves about the terms and conditions of this recruitment. The details of vacancies are given below:-

   Post Code	Name of the Post	No. of Vacancies	Age as on 01/07/2017 Min. Max.	Scale of Pay Rs.
   1	Assistant Executive Engineers (Civil) in I & CAD Department	204	18-44*	Rs. 37,100-91,450/-
   2	Assistant Executive Engineers (Electrical) in I & CAD Department	120
   3	Assistant Executive Engineer (Mechanical) in Ground Water Department	01
   4	Assistant Executive Engineers (Electrical) in R&B Department	11
   5	Assistant Executive Engineers (Civil) in R&B Department	106
   6	Assistant Executive Engineers (Civil/Mechanical) in Tribal Welfare Engineering Department	21
   Grand Total		463

   (The Details of Vacancies department wise i.e., Community, Zone/State and Gender wise (General / Women) may be seen at Annexure-I.)

   IMPORTANT NOTE: The number of vacancies are subject to variation on intimation being received from the appointing authority

4. EDUCATIONAL QUALIFICATIONS:

   Applicants must possess the qualifications from a recognized University/ Institution as detailed below or equivalent thereto, as specified in the relevant Service Rules, indented by the Department as on the Date of Notification.

   Post Code	Name of the Post	Educational Qualifications
   1	Assistant Executive Engineers (Civil) in I & CAD Department	Must possess a Bachelor's Degree in Civil Engineering of a University in India established or incorporated by or under a Central Act, Provincial Act or a State Act or an Institution recognized by the University Grants Commission / AlI IndiaCouncil for Technical Education or an Equivalent qualification.
   2	Assistant Executive Engineers (Electrical) in I & CAD Department	Must possess a Bachelor's Degree in Electrical Engineering or Electrical and Electronics Engineering of a University in India established or incorporated by or under a Central Act, Provincial Act or a State Act or an Institution recognized by the UniversityGrants Commission / AlI India Council for Technical Education or an Equivalent qualification.
   3	Assistant Executive Engineers (Mechanical) in Ground Water Department	Must possess the B.E. Degree (Mechanical) or B.Tech (Agricultural Engineering) of a University or an Institution recognized by the University Grants Commission or an Equivalent qualification.
   4	Assistant Executive Engineers (Electrical) in R & B Department	Must possess a Bachelor's Degree in Electrical Engineering of a University in India established or incorporated by or under a Central Act, Provincial Act or a State Act or an Institution recognized by the University Grants Commission or an equivalent qualification or a pass in sections (A) & (B) of theInstitution of Engineers in Electrical Engineering.
   5	Assistant Executive Engineers (Civil) in R&B Department	Must possess a Bachelor's Degree in Civil Engineering of a University in India established or incorporated by or under a Central Act, Provincial Act or a State Act or an Institutionrecognized by the University Grants Commission or an equivalent qualification.
   6	Assistant Executive Engineers (Civil/Mechanical) in Tribal Welfare Engineering Department	Must be a Graduate in Engineering (Civil/Mechanical) from any University in India established or incorporated by or under a Central Act, Provincial Act or a State Act or an Institutionrecognized by the University Grants Commission or an Equivalent qualification.

5. AGE:

6. Minimum 18 years & Maximum 44* years. The age is reckoned as on 01/07/2017 (Rule- 12(1)(a)(v) of State and Subordinate Service Rules).

   Minimum Age (18 years):A Candidate should not be born after 01/07/1999.

   Maximum Age (44 years): A candidate should not be born before 02/07/1973.

   The Upper Age limit will be relaxed as per Rules (shown in the table) and will be calculated on the above lines.

   *As per G.O. Ms. No. 329 GA(Ser.A) Dept., Dt. 27/07/2015 read with G.O. Ms. No. 264 GA(Ser.A) Dept.,Dated: 26-07-2016,the upper age limit is raised up to 10 years.

   N.B.: 1) No person shall be eligible if he/she is less than 18 years of age.

   2) No person shall be eligible if he/she crossed 58 years of age (Superannuation age).

   Age Relaxations: The upper age limit prescribed above is however relaxable in the following cases:

   Sl. No.	Category of candidates	Relaxation of age permissible
   1	2	3
   1.	Retrenched temporary employees in the State Census Department with a minimum service of 6 months.	3 Years
   2.	Telangana State Government Employees (Employees of TSRTC, Corporations, Municipalities etc. are not eligible).	5 Years based on the length of regular service.
   3.	Ex-Service men	3 years & length of service rendered in the armed forces.
   4.	N.C.C.(who have worked as Instructor in N.C.C.)	3 Years & length of service rendered in the N.C.C.
   5.	SC/ST and BCs	5 Years
   6.	Physically Handicapped persons	10 Years

7. (a) FEE: (Remittance of Fee) Each applicant must pay Rs. 200/- (RUPEES TWO HUNDRED ONLY) towards Online Application Processing Fee. This apart, the applicants have to pay RS. 120/- (RUPEES ONE HUNDRED AND TWENTY ONLY) towards Examination Fee. However, the following category of candidates belonging to Telangana State only are exempted from payment of Examination fee.

1. SC, ST, BC & PH.

2. Unemployed applicants in the age group of 18 to 44 years (They have to submit declaration at an appropriate time to the Commission that they are unemployed).

N.B.:- BC's, SC's and ST's belonging to other states are not exempted from payment of Application processing Fee and Examination Fee and they are not entitled for any kind of reservation.

1. Mode of Payment of Fee:

   The Fee mentioned at Para-I(6)(a) is to be paid online through SBI ePay duly following online instructions once the application form details are submitted by filling TSPSC ID, date of birth and other particulars.

   The fee once remitted, shall not be refunded or adjusted under any circumstances. Failure to pay the examination fee, application fee, wherever applicable will entail total rejection of application. The list of Banks providing service for the purpose of online remittance of fee is given in ANNEXURE - II.

   PARA-II: CENTRES FOR THE WRITTEN EXAMINATION:

   1. The Written Examination (Objective Type) will be held at the following centres or as may be decided by the Commission.

      1. HYDERABAD (including HMDA Jurisdiction)

      2. KARIMNAGAR

      3. KHAMMAM

      4. WARANGAL

      5. NIZAMABAD

   2. Applicants have to choose any Four (04) Centers in order of preference. The Commission however reserves the right to allot candidates to any centre other than the centre chosen by the applicant or to abolish / create a new centre for administrative reasons. Request for change of the centre will not be entertained.

PARA-III: HOW TO APPLY:

1. HOW TO UPLOAD THE APPLICATION FORM:

   1. The Applicants have to read the User Guide for Online Submission of Applications and then proceed further.

      1. Step: The Candidate has to visit the WEBSITE http://www.tspsc.gov.in and fill the OTR application if not registered earlier to obtain TSPSC ID. While filling the same, the candidates have to ensure that there are no mistakes in it. The Commission bears no responsibility for the mistakes, if any, made by the candidates.

      2. STEP: The candidates have to visit the websitehttp://www.tspsc.gov.in to submit Application and Click on the Link with Notification Number and Name, provide TSPSC ID and Date of Birth to proceed further.

         Candidate has to verify the details fetched from various databases pertaining to qualification, caste, Aadhar etc, and displayed on the screen. If the displayed details are correct he/she has to click Yes on confirm button. If any details are not displayed or need to be changed, he/she should click No on confirm button. If details are not displayed a text box will open and candidate has to feed the details manually. Required documents have to be uploaded by clicking the upload button. In addition to the details obtained from OTR database, Notification specific details such as Examination Centre opted, required qualification, university details, eligibility and accepting declarations etc. are to be filled by the candidate. Preview and Edit facility is available to make changes and submit for proceeding to Next step of making online payment of fee.

      3. STEP:-Immediately on entering the above details, the applicant will get payment gateway of SBI ePay.

      4. STEP:-The applicant should pay the prescribed fee as specified through any of the four modes of payment online. Separate instructions have to be followed for each mode of payment.

      5. STEP:-After payment of fee, the PDF Application will be generated which contains the particulars furnished by the candidates. The ID No in the PDF Application form has to be quoted for future reference/correspondence.

         1. Candidate shall note that, the details available with OTR database at the time of submitting the application will be considered for the purpose of this notification. If, any changes are made by the candidate to OTR database at a later date will not be considered for the purpose of this Notification.

         2. Hand written/ Typed/ Photostat copies/ outside printed Application Form will not be accepted and liable for rejection.

         3. The applicants should be willing to serve anywhere in Telangana State.

         4. For any Technical problems related to Online submission and downloading of Hall- Tickets please contact 040-23120301 or 040-23120302(Call Time: 10.30 A.M to 1.00P.M & 1.30 P.M to 5.30 P.M) or mail to helpdesk@tspsc.gov.in

      NOTE:

      1. The Commission is not responsible, for any discrepancy in Bio-data particulars while submitting the application form through Online. The applicants are therefore, advised to strictly follow the instructions and User guide in their own interest before submitting the application.

      2. The particulars furnished by the applicant in the Application Form will be taken as final, and data entry is processed, based on these particulars only by Computer. Candidates should, therefore, be very careful in Uploading / Submitting the Application Form Online.

      3. Incomplete/incorrect application form will be summarily rejected. The information if any furnished by the candidate subsequently in any form will not be entertained by the Commission under any circumstances. Applicants should be careful in filling-up the application form and submission. If any lapse is detected during the scrutiny, the candidature will be rejected even though he/she comes through the final stage of recruitment process or even at a later stage.

      4. Before Uploading/Submission of Application Form, the Candidates should carefully ensure his/her eligibility for this examination. No relevant column of the application form should be left blank, otherwise application form will not be accepted.

      PARA- IV GENERAL PROVISIONS

      1. Applicant must compulsorily fill-up all relevant columns of application and submit application through website only. The particulars made available in the website shall be processed through computer and the eligibility decided in terms of notification.

      2. The applications received online in the prescribed proforma available in the website and within the time shall only be considered and the Commission will not be held responsible for any kind of discrepancy.

      3. Applicants must upload his/her own scanned photo and signature through J.P.G format.

      4. The applicants should not furnish any particulars that are false, tampered, fabricated or suppress any material information while making an application through website.

      5. All the essential certificates issued by the competent authority of Telangana State shall compulsorily be kept with the applicants to produce as and when required to do so. Failure to produce the required certificates on the day of verification will lead to disqualification.

      6. Important - The claim of the candidates with regard to the date of birth, educational / technical qualifications, experience and community are accepted only provisionally on the information furnished by them in their application form and is subject to verification and satisfaction of the Commission. Mere admission to any test or interview or inclusion of the name of a candidate in a Merit List will not confer on the candidate any right for appointment. The candidature is therefore, provisional at all stages and the Commission reserve the right to reject candidature at any stage of the selection even after the advice has been made.

      7. This Recruitment is entrusted to TSPSC along with Finance Clearance vide G.O. Ms. No. 98 Finance (HRM.VII) Department, Dt. 17/08/2016, G.O. Ms. No. 117 Finance (HRM.VII) Department, Dt. 14/09/2016, G.O. Ms. No. 2 Finance (HRM.I) Department, Dt. 05/01/2016,

         G.O. Ms. No. 93 Finance (HRM.VII) Department, Dt. 27/05/2017, G.O. Ms. No. 84 Finance (HRM.VII) Department, Dt. 17/05/2017and G.O. Ms. No. 65 Finance (HRM.VII) Department, Dt. 28/04/2017.

         The following certificates must be kept ready by the candidates for the purpose of verification and also at the time of making Online application.

         1. Aadhar card.

         2. Proof of Educational Qualifications. iii). Date of Birth Certificate / S.S.C

      1. School Study Certificate

      2. Declaration by the Unemployed (For claiming examination fee exemption) vi). No Objection Certificate from Employer (if anywhere employed)

      The following Certificates should be obtained from Govt. of Telangana State in prescribed proforma for the purpose of verification.

      1. Community Certificate.

      2. Non-Creamy Layer Certificate as per Form- VIIB / Creamy Layer Certificate as per Form- VIIC.

      3. Certificate of Residence / Nativity (where the Candidates not studied in School / Private Study)

         The following Certificates (whichever is applicable) should be obtained from Competent Medical authority for the purpose of verification.

      4. a) Medical Certificate for the Blind

      1. Certificate of Hearing Disability and Hearing Assessment

      2. Medical Certificate in respect of Orthopedically Handicapped Candidates

      PARA-V:- IMPORTANT LEGAL PROVISIONS GOVERNING THE RECRUITMENT PROCESS:

      1. Vacancies: The recruitment will be made to the vacancies notified before the examination only. There shall be no waiting list as per G.O. Ms. No. 81 General Administration (Ser.A) Department, Dated 22/02/1997. If additional vacancies are reported by the Government an addendum to that effect will be issued.

      2. Recruitment:-The recruitment will be processed as per the Notification and also as per the Service Rules and Instructions issued by the Government and also as decided by the Commission from time to time in terms of Special Rules/ Adhoc Rules governing the recruitment and G.O.Ms.No.32, Irrigation & CAD (Services.IX) Department, dated 12/04/2010 and G.O.Ms.No.33, Irrigation & CAD (Services.III) Department, dated 01/06/2016 and G.O.Ms.No.8, I & CAD (CAD.SER.I) Dept, dated 16/01/1991, G.O.Ms.No.34, I & CAD (SER.II) Dept, dated 01/01/2016, G.O.Ms.No.103, Transport, Roads & Buildings(S.II) Dept, dated 22/05/1996, G.O.Ms.No.67, Social Welfare (V) Dept, dated 12/04/1994 read with G.O.Ms.No.63 Social Welfare (TW.SER.II.1) Dept, dated 23/08/2006, G.O.Ms.No.103, Transport, Roads & Buildings(S.II) Dept, dated 22/05/1996 read with G.O.Ms.No.230, Transport, Roads & Buildings(S.II) Dept, dated 02/11/2005.

      3. Rules: All are informed that the various conditions and criterion prescribed herein are governed by the General Rules of existing State and Subordinate Service Rules, read with the relevant Special Rules applicable to any particular service in the departments. Any guidelines or clarification is based on the said Rules, and, in case of any necessity, any matter will be processed as per the relevant General and Special Rules in force.

      4. Constitutional Provisions:- The Commission is empowered under the provisions of Article 315 and 320 of the Constitution of India read with relevant laws, rules, regulations and executive instructions and all other enabling legal provisions in this regard to conduct examination for appointment to the posts notified herein, duly following the principle of order of merit as per Rule 3 d (ix) (a) of the TSPSC Rules of Procedure read with reference to relevant statutory provisions and ensuring that the whole recruitment and selection process is carried out with utmost regard to maintain secrecy and confidentiality so as to ensure that the principle of merit is followed. A candidate shall be disqualified for appointment, if he himself / she herself or through relations or friends or any others has canvassed or endeavored to enlist for his candidature, extraneous support, whether from official or non-official sources for appointment to this service.

      5. Zonal/Local:- The Zonal and Local Reservations shall be followed as per the Para -8 of

         A.P. Public Employment (Organization of Local Cadres and Regulation of Direct Recruitment) Order, 1975 (G.O.P. No. 674, G.A. (SPF-A) Dept., Dated: 20/10/1975) read with G.O. Ms. No. 124, General Administration (SPF-A) Department, dated: 07/03/2002 and other orders issued by the Government and within the meaning of Sections 3 and 97 of

         A.P. State Reorganization Act 06/2014.

         Note: The Post Code No.3 i.e., Assistant Executive Engineer (Mechanical), in Ground Water Department & Post Code No. 4 i.e., Assistant Executive Engineer (Electrical),

         in R& B Department are identified as a State Cadre Posts. Hence, reservation for Local candidates is not applicable.

      6. Employed:-The persons already in Government Service/ Autonomous bodies/ Government aided institutions etc., whether in permanent or temporary capacity or as work charged employees are required to inform in writing to the Head of Office / Department, as the case may be and required to submit the "No objection" from the concerned Head of Office / Department to the Commission as and when required to do so.

      7. Penal Action:-The Commission is also empowered to invoke the penal provisions of the

         A.P. Public Examinations (Prevention of Malpractices and Unfair means) Act 25/97 for matters connected therewith or incidental thereto and as per the Rules of Procedure of TSPSC published in Telangana Gazette No: 60 dated 28/12/2015 in respect of this Notification.

      8. Caste & Community: Community Certificate issued by the competent authority (obtained from Government of Telangana State) in terms of G.O.Ms No. 58, SW (J) Dept., dt: 12/5/97 read with G.O. Ms. No. 5 Scheduled Castes Development (POA.A2) Dept., Dt. 08/08/2014,

         G.O. Ms. No. 11 Scheduled Castes Development (POA.A2) Dept., Dt. 17/09/2014 and G.O. Ms. No. 2 Scheduled Castes Development (POA.A2) Dept., Dt. 22/01/2015 should be submitted at appropriate time in respect of SC & ST Candidates. In respect of candidates belonging to Backward Classes are required to produce Community Certificate (BC-A, BC- B, BC-C, BC-D& BC-E) from Competent Authority i.e., from Tahsildars in the State of Telangana not below the rank of Deputy Tahsildar through E-seva/Mee-seva (G.O. Ms. No. 16 BCW(OP) Dept., Dt. 11/03/2015) and orders and instructions issued by the Government from time to time. As per General Rules for State and Subordinate Service Rules, Rule - 2(28) Explanation: No person who professes a religion different from Hinduism shall be deemed a member of Schedule Caste.

      9. Reservation:- (i)The Reservation and eligibility in terms of General Rule 22 & 22 (A) of State and Subordinate Service Rules are applicable.

   2. Reservation to Disabled persons is subject to their eligibility to any of the above category of posts and shall be subject to Telangana State and Subordinate Service Rules governing the posts. The required extent of deformity and the genuineness of the Medical Certificate and in the case of ambiguity or doubt, the same shall be referred to the Appellate Medical Boards as per the instructions of the Government.

   3. The Reservation to Women will apply as per Telangana State and Subordinate Service Rules.

   4. Reservation to BC-E group will be subject to the adjudication of the litigation before the Honorable Courts including final orders in Civil Appeal No: (a) 2628-2637 of 2010 in SLP. No. 7388-97 of 2010, dated. 25/03/2010 and orders from the Government.

1. Distance Education:- The Candidates who have obtained Degrees through Open Universities / Distance Education mode are required to have recognition by the University Grants Commission / AICTE / Distance Education Council as the case may be. Unless such Degrees had been recognised by the relevant Statutory Authority, they will not be accepted for purpose of Educational Qualification. The onus of Proof of recognition by the relevant Statutory Authority that their Degrees / Universities have been recognised, rests with the Candidate.

PARA-VI: RESERVATION TO LOCAL CANDIDATES

For Post Code No.3 & Post Code No.4: Reservation for local candidates is not applicable as the posts are State cadre.

For Post Code No.1, 2, 5 & 6: Reservation to the Local candidates is applicable as provided in the Rules and as amended from time to time as in force on the date of notification. The candidates claiming reservation as Local candidates should obtain the required Study certificates (from IV Class to X Class or SSC) (OR) Residence Certificate in the Proforma only for those candidates who have not studied in any Educational Institutions as the case may be. The relevant certificates may be got ready with authorized signature and kept with the candidates to produce as and when required.

DEFINITION OF LOCAL CANDIDATE:- In terms of Para-(7) of A.P. Public Employment (Organization of Local Cadres and Regulation of Direct Recruitment) Order, 1975 (G.O.P. No. 674, G.A. (SPF-A) Dept., Dated: 20/10/1975). "LOCAL CANDIDATE" means a candidate for direct recruitment to any post in relation to that Local area where he/she has studied in Educational Institution(s) for not less than four consecutive academic years prior to and including the year in which he/she appeared for S.S.C or its equivalent examination. If however, he/she has not studied in any educational institution and obtained SSC or its equivalent qualification or Open School, Private Study basis, he/she has to produce residential certificate issued by the Tahsildar.

1. In case any Candidate who does not fall within the scope of above then, if he/she has studied for a period of not less than seven years prior to and inclusive of the year in which he/she has studied SSC or its equivalent qualification, he/she will be regarded as local candidate on the basis of the maximum period out of the said period of seven years and where the period of his/her study in two or more local areas or equal such local area where he/she has studied last in such equal periods will be taken for determining the local candidature. Similarly, if he/she has not studied during the above said period in any Educational Institution(s) and obtained private study the place of residence during the above period will be taken into consideration and local candidature will be determined with reference to the maximum period of residence or in the case of equal period where he/she has resided last in such equal periods.

2. If the claim for local candidature is based on study, the candidate is required to produce a certificate from the Educational Institution(s) where he/she has studied during the said 4/7- year period. If, however, it is based on residence, a certificate should be obtained from an officer of the Revenue Department not below the rank of Tahsildar or Deputy Tahsildar in independent charge of Mandal.

3. If, however, a candidate has resided in more than one Mandal during the relevant four/seven years period but within the same District or Zone as the case may be separate certificates from the Tahsildar exercising jurisdiction have to be obtained in respect of different areas.

   NOTE:

   1. Residence Certificate will not be accepted, if a candidate has studied in any educational institution up to S.S.C. or equivalent examination, such candidates have to produce study certificates invariably. The candidates, who acquired Degree from Open Universities without studying SSC / Matriculation or equivalent in Educational Institutions, have to submit Residence Certificate only. Educational institutions means a recognized institution by the Government / University / Competent Authority.

   2. Each of the following Zones comprises the Districts mentioned against each Zone.

The following are the Present Zones in the Telangana State:

1. Adilabad, Karimnagar, Warangal and Khammam. (ADB, KRMN, WGL, KMM)

2. Hyderabad, Ranga Reddy, Nizamabad, Mahaboobnagar, Medak and Nalgonda. (HYD, RRD, NZB, MBNR, MDK, NLG)

   For P.C.No.5, certain vacancies are earmarked for City Cadre

   City Cadre: City of Hyderabad consists of Hyderabad Division, Secunderabad Division of Municipal Corporation of Hyderabad, Secunderabad Contonment area, O.U.Campus, Fatehnagar, Bowenpally, Macha Bolarum, Malkajgiri, Uppal Khalsa, Alwal, Balanagar, Moosapet, Kukatpally Panchayat Areas and Zamistanpur and Lallaguda villages. (HYD)

   NB: Where City Cadre is not organized separately Candidates belonging to City Cadre - City of Hyderabad will be considered under Zone-VI

   PARA-VII: SCHEME OF EXAMINATION:- The Scheme & Syllabus for the examination has been shown in ANNEXURE-III.

   PARA-VIII: PROCEDURE OF SELECTION:

   THE SELECTION OF CANDIDATES FOR APPOINTMENT TO THE POSTS WILL BE MADE IN TWO SUCCESSIVE STAGES VIZ.,

   1. Examination (Objective Type) by Online / OMR based.

      AND

   2. Oral Test in the shape of Interview (only for those qualified as per Rules).

THE FINAL SELECTION OF THESE POSTS WILL BE BASED ON THE EXAMINATION EITHER ONLINE OR OMR BASED AND INTERVIEW MARKS PUT TOGETHER.

1. Those candidates who qualify in the Examination (Objective Type) in order of merit will be called for verification of Certificates and Interview in 1:2 ratio, Community and Category wise for the vacancies available. The minimum qualifying marks for Interview / Selection are OCs 40%, BCs 35% SCs, STs and PH 30%. The minimum qualifying marks are relaxable in the case of SC/ST/BC/PH at the discretion of the Commission.

2. The candidates will be selected and allotted to Service / Department in Telangana State as per their rank in the merit list and as per zonal preference for allotment of candidates against vacancies and for the vacancies available. Candidates for the post code no.3 i.e., Assistant Executive Engineer (Mechanical), in Ground Water Department & post code no. 4 i.e., Assistant Executive Engineer (Electrical), in R& B Department will be selected on state wide merit as they are State Cadre posts.

   N.B.: Mere securing minimum qualifying marks does not vest any right in a candidate for being considered for selection.

3. The appearance in all papers at the Written Examination as per rules is compulsory. / Absence in any paper/ papers will automatically render his candidature as disqualified.

4. Candidates have to produce Original documents and other particulars on the day of verification itself. If candidate fails to produce any of the required certificates and if the particulars furnished by him / her in the Application do not tally with the Original documents produced him / her, then his / her candidature will be rejected/disqualified without any further correspondence. As candidature for the recruitment is processed through Computer/Electronic devices based on the particulars furnished in the Application Form, the candidate is advised to fill in all the relevant particulars carefully.

5. While the Commission calls for preference of candidates in respect of posts, zones etc., in the application form, it is hereby clarified that the said preferences are only indicative for being considered to the extent possible but not binding or limiting the Commission's powers enjoyed under Article 315 and 320 of the Constitution of India. Therefore, the Commission has the power to assigning a successful candidate to any of the notified posts for which he is considered by them to be qualified and eligible, subject to fulfilling the selection criterion. Mere claim of preference for any Zone for allotment against vacancy does not confer a right to selection for that Zone in particular or any Zone in general.

6. The appointment of selected candidates (other than Physically challenged) will be subject to their being found medically fit in the appropriate Medical Examination, and if he/she is of sound health, active habits free from any bodily defect or infirmity.

PARA-IX:DEBARMENT:

1. Candidates should make sure of their eligibility to the post applied for and that the declaration made by them in the format of application regarding their eligibility is correct in all respects. Any candidate furnishing in-correct information or making false declaration regarding his/her eligibility at any stage or suppressing any information is liable to be debarred for five years from appearing for any of the examinations conducted by the commission, and summarily rejection of their candidature for this recruitment.

2. The Penal Provisions of Act 25/97 published in the State Gazette No. 35, Part-IV.B Extraordinary dated: 21/08/1997 shall be invoked if malpractice and unfair means are noticed at any stage of the Recruitment.

3. The Commission is vested with the constitutional duty of conducting recruitment and selection as per rules duly maintaining utmost secrecy and confidentiality in this process and any attempt by anyone causing or likely to cause breach of this constitutional duty in such manner or by such action as to violate or likely to violate the fair practices followed and ensured by the Commission will be sufficient cause for rendering such questionable means as ground for debarment and penal consequences as per law and rules and as may be decided by the Commission.

4. Any candidate is or has been found impersonating or procuring impersonation by any person or resorting to any other irregular or improper means in connection with his / her candidature for selection or obtaining support of candidature by any means, such a candidate may in addition to rendering himself/ herself liable to criminal prosecution, will be debarred permanently from any exam or selection held by the Service Commission in the country.

MEMORANDUM OF MARKS:- Memorandum of Marks will be issued on payment of Rs.200/- (Rupees Two Hundred Only) through Online Payment in favour of the Secretary,

PARA XI: SPECIAL INSTRUCTIONS TO CANDIDATES:

Candidates are directed to follow the Commission's Website (www.tspsc.gov.in) regularly to know the latest developments of this Recruitment and any changes/ Modifications/ Addendum/ Corrigendum, dates of Examination, calling of candidates for verification of Certificates/ Interviews/ Results etc. Candidates are advised to go through the Instructions to Candidates enclosed to this Notification at Annexure-IV.

PARA-XII: COMMISSION'S DECISION TO BE FINAL:

The decision of the Commission in all aspects and in all respects pertaining to the application and its acceptance or rejection as the case may be, conduct of examination and at all consequent stages culminating in the selection or otherwise of any candidate shall be final in all respects and binding on all concerned, under the powers vested with it under Article 315 and 320 of the Constitution of India. Commission also reserves its right to alter and modify time and conditions laid down in the notification for conducting the various stages up to selection, duly intimating details thereof to all concerned, as warranted by any unforeseen circumstances arising during the course of this process, or as deemed necessary by the Commission at any stage.

Post Code No: 1

ANNEXURE - I (GENERAL RECRUITMENT)

BREAKUP OF PROVISIONAL VACANCIES FOR THE POST OF ASSISTANT EXECUTIVE ENGINEER (CIVIL) IN I & CAD DEPARTMENT

Zone	OC		BC-A		BC-B		BC-C		BC-D		BC-E		SC		ST		PH		Total		Grand Total
	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W
V	30	15	5	2	6	4	-	2	4	2	2	3	9	5	4	3	HH-2 OH-2	HH-4 OH-1 VH-3	64	44	108
VI	28	14	4	2	5	5	-	-	5	1	3	1	9	4	3	3	HH-1 OH-1 VH-1	VH-3 HH-3	60	36	96
Total:	58	29	9	4	11	9	-	2	9	3	5	4	18	9	7	6	7	14	124	78	204

Post Code No:2 BREAKUP OF PROVISIONAL VACANCIES FOR THE POST OF ASSISTANT EXECUTIVE ENGINEER(ELECTRICAL) IN I & CAD DEPARTMENT

Zone	OC		BC-A		BC-B		BC-C		BC-D		BC-E		SC		ST		PH		Total		Grand Total
	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W
V	19	10	3	1	4	2	-	-	4	1	2	-	6	3	3	1	OH-1	-	42	18	60
VI	19	10	3	1	4	2	-	-	4	1	2	-	5	3	3	1	HH-1 OH-1	-	42	18	60
Total:	38	20	6	2	8	4	-	-	8	2	4	-	11	6	6	2	3	-	84	36	120

Post Code No:3 BREAKUP OF PROVISIONAL VACANCIES FOR THE POST OF ASSISTANT EXECUTIVE ENGINEER(MECHANICAL) IN GWD DEPARTMENT

State Wide

OC

BC-A

BC-B

BC-C

BC-D

BC-E

SC

ST

PH

Total

Grand Total

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

--

01

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

01

01

Post Code No:4 BREAKUP OF PROVISIONAL VACANCIES FOR THE POST OF ASSISTANT EXECUTIVE ENGINEER(ELECTRICAL) IN ROADS & BUILDINGS

DEPARTMENT

State Wide

OC

BC-A

BC-B

BC-C

BC-D

BC-E

SC

ST

PH

Total

Grand Total

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

4

1

--

1

--

1

--

--

--

--

--

--

1

1

--

1

--

1(VH)

5

6

11

Post Code No:5 BREAKUP OF PROVISIONAL VACANCIES FOR THE POST OF ASSISTANT EXECUTIVE ENGINEER(CIVIL) IN TRANSPORT, ROADS & BUILDINGS

DEPARTMENT

ZONE	OC		BC-A		BC-B		BC-C		BC-D		BC-E		SC		ST		PH		TOTAL		GRAND TOTAL
	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W	G	W
V	14	8	2	1	2	1	1	0	2	1	1	1	4	1	2	1	0	1 (HH)	28	15	43
VI	16	9	2	1	3	3	0	0	3	0	2	0	5	2	2	1	1 (VH)	1 (HH)	34	17	51
C.C	3	2	0	1	0	1	0	0	1	0	1	0	1	1	1	0	0	0	7	5	12
Total	33	19	4	3	5	5	1	0	6	1	4	1	10	4	5	2	1	2	69	37	106

Post Code No:6 BREAKUP OF PROVISIONAL VACANCIES FOR THE POST OF ASSISTANT EXECUTIVE ENGINEER(CIVIL/MECHANICAL) IN TRIBAL WELFARE

ENGINEERING DEPARTMENT

ZONE

OC

BC-A

BC-B

BC-C

BC-D

BC-E

SC

ST

PH

TOTAL

GRAND TOTAL

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

G

W

V

7

4

1

1

1

2

0

0

0

0

0

0

2

1

0

1

1(OH)

0

12

9

21

IMPORTANT NOTE: The number of vacancies are subject to variation on intimation being received from the appointing authority.

ANNEXURE-III

Post Code Numbers 1,2,4 & 5

SCHEME AND SYLLABUS FOR THE POST OF ASSISTANT EXECUTIVE ENGINEERS (CIVIL) / (ELECTRICAL) IN VARIOUS ENGINEERING SERVICES

SCHEME OF EXAMINATION

Part: A: WRITTEN EXAMINATION (Objective Type)	No. of Questions	Duration (Minutes)	Maximum Marks
Paper-I: General Studies And General Abilities	150	150	150
Paper-II: Civil Engineering (Degree Level) / Electrical Engg.,(Degree Level)	150	150	300
Part: B: Interview			50
Total			500

Syllabus

Paper-I: GENERAL STUDIES AND GENERAL ABILITIES

1. Current affairs - Regional, National and International.

2. International Relations and Events.

3. General Science; India's Achievements in Science and Technology.

4. Environmental issues; Disaster Management- Prevention and Mitigation Strategies.

5. Economic and Social Development of India and Telangana.

6. Physical, Social and Economic Geography of India.

7. Physical, Social and Economic Geography and Demography of Telangana.

8. Socio-economic, Political and Cultural History of Modern India with special emphasis on Indian National Movement.

9. Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.

10. Indian Constitution; Indian Political System; Governance and Public Policy. 11.Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and

inclusive policies.

12.Society, Culture, Heritage, Arts and Literature of Telangana. 13.Policies of Telangana State.

14.Logical Reasoning; Analytical Ability and Data Interpretation. 15.Basic English. (10th Class Standard)

PAPER-II: CIVIL ENGINEERING (DEGREE LEVEL)

1. BUILDING MATERIALS AND CONSTRUCTION

   Bricks- Types of Bricks, Indian standard classification, properties; Stones - Types of stones, classification, properties, dressing and polishing of stones; Methods of Quarrying; Cement - Different grades and types of cement, properties and IS specifications; Aggregates - coarse and fine aggregate, properties and IS specifications; Cement Mortar - Proportions of cement mortar for various applications; Concrete - Constituents of Concrete, Different grades of

   Concrete, mix proportioning using IS Code, Properties of fresh and hardened Concrete; Admixtures - Types of Admixtures

2. STRENGTH OF MATERIALS AND THEORY OF STRUCTURES

   Strength of Materials: Simple stresses and strains, elastic constants and relationship between them; Compound bars; Temperature stresses; Shear forces and bending moment diagrams for beams; Principal stresses and Mohr's circle of stress, Theory of bending and bending stresses ; Shear stress distribution; Theory of torsion; Springs; Deflections of beams; Thin and thick cylinders;; Analysis of trusses, Betti-Maxwell theorem; Shear centre and unsymmetrical bending.

   Theory of Structures: Direct and bending stresses; Columns and struts; Strain energy method; Moving loads and influence lines; Arches and suspension bridges; Static and kinematic indeterminacy; Moment distribution, Slope deflection, and Kani's methods applied to continuous beams and portal frames; Column analogy and matrix methods of analysis.

3. RCC AND STEEL STRUCTURES

   Concrete Structures: Materials, permissible stresses and IS Specifications; Working stress methods; Limit State Method - Stress Blocks parameters, design of Beams, Slabs, Columns and Footing; Design for Shear and Torsion; Design of Retaining Walls, Water tanks, and T-Beam Slab bridges; Yield line theory.

   Steel Structures: Properties of steel sections, permissible stresses, IS Specifications; Riveted and welded joints and connections; Design of simple and compound Beams and Columns, Column bases, Roof trusses, Plate and Gantry Girders; Plate Girder Lattice Girder Railway bridges, and Bearings. Plastic analysis.

   Pre-Stressed Concrete: Basic concepts, material for pre-stressing, losses in Pre- stress, classification of pre-stressing system; Analysis of PSC Sections.

4. FLUID MECHANICS AND HYDRAULICS

   Fluid Properties; Measurement of Pressure - Manometers; Fluid Kinematics - Classification of Fluids, Stream function and Velocity potential, significance and use of Flownets, Fluid dynamics - Continuity equation, Bernoulli's equations and Impulse momentum equation; Laminar and Turbulent flow through pipes - significance of Reynolds number, Hagen - Poiseuille's equation, Darcy - Weisbach equation, Friction factor, Water hammer phenomenon; Compressible flow - Bernoulli's equation for Isothermal and Adiabatic conditions, Mach Number, Mach cone, stagnation properties; Steady uniform flow through open channels; Gradually varied flows - significance of Froude number, classification and computation of Flow profiles, Hydraulic jump, Surges; Boundary layer - Laminar and Turbulent Boundary layer, Boundary layer thickness, rough and smooth Boundaries, Boundary layer separation; Dimensional analysis and similarity laws; Hydraulic Turbines - classification, Velocity triangles, principles and design of reaction and impulse turbines; Centrifugal pumps - specific speed, work done and efficiency, characteristic curves.

5. HYDROLOGY AND WATER RESOURCES ENGINEERING

   Hydrological cycle; Rainfall - types and measurement, network design; Infiltration

   - - index; Runoff - process, factors and determination of runoff, dependable yield; Floods - flood hydrograph, computation of flood peak using rational formula, unit hydrograph method and Gumbel's extreme value methods; Groundwater - types of aquifer and properties, Darcy's law, specific yield, steady radial flow to wells in confined and unconfined aquifers; Irrigation - types and advantages, soil water plant relationship, consumptive use, duty, delta, base period, crops and their water requirements; Single and multipurpose projects; Dams - classification, forces and design of Gravity dam and Earth dam; Spillways - types, energy dissipation, stilling basin, Appurtenances; Canals - alignment, Kennedy's and Lacey's theories, lining of Canals; Weirs -

   components, design of vertical drop and sloping glacis weir; Seepage forces - Bligh's Theory, Khosla's theory; Canal falls - types and design principles; Cross drainage works - classification and design principles of aqueducts; Hydropower - classification and principle components of Hydroelectric power plants.

6. ENVIRONMENTAL ENGINEERING.

   Water supply - objectives, rate of demand, population forecasts; Analysis of water - classification, design of coagulation, sedimentation, filtration, disinfection and softening processes; Methods of layout of distribution pipes - Hardy cross method; Waste water engineering - systems of sewerage, hydraulic formulae and design of sewers, BOD, COD, self purification of natural streams, methods of sewage disposal; Treatment of sewage - principles and design of grit chamber, sedimentation tanks, trickling filters, activated sludge process, sludge digestion tanks, septic tanks; Municipal solid waste - characteristics, collection and transportation of solid wastes; Air Pollution - types and sources of pollutants, air quality standards; Noise pollution - Impacts and permissible limits, measurement and control of noise pollution.

7. TRANSPORTATION ENGINEERING.

   Highway Classification as per IRC; Highway alignment; Engineering Surveys; Geometric Design; Cross sectional elements of road; Gradient; Grade compensation; Traffic Surveys - speed, Volumes, origin and destination; Highway capacity and level of service as per HCM 2000; Intersection - at grade and grade separated; Channelization; Rotary intersection; signal design - webstar method, traffic signs, pavement marking; Parking studies, accidental studies, pavement types, Factors considered for pavement design, flexible and rigid pavements design concepts.

   Railway Engineering: Permanent way, rails, sleepers, ballast; Creep, coning of wheel, rail fixtures and fastenings, super elevation, cant deficiency, curves, turnout; Points and crossings.

   Airport Engineering: Selection of site of Airport, runway orientation and design, wind rose diagram, basic run way length, correction to basic runway length.

8. SOIL MECHANICS AND FOUNDATION ENGINEERING

   Soil Mechanics: Physical properties of soils, Classification and identification, Permeability, Capillarity, Seepage, Compaction, Consolidation, Shear Strength, Earth pressure, Slope stability;

   Foundation Engineering: Site investigations, stress distribution in soils, Bearing capacity, Settlement analysis, Types of Foundation, Pile foundations, Foundations on expansive soils; swelling and its preventions; Coffer dams, Caissons, Dewatering, Bracing for excavations, Newmark charts, machine foundations.

   Engineering Geology: Mineralogy, Structural Geology, Groundwater Exploration methods; Engineering Geology applications for Tunnels, Dams and Reservoirs; Geological hazards and preventive measures.

9. ESTIMATION, COSTING AND CONSTRUCTION MANAGEMENT

   Abstract estimate: Detailed estimate - centerline, long & short wall method, various items of Civil Engineering works as per Indian Standard, General Specifications - Earth Work, Brick / Stone Masonry in Cement Mortar, RCC, Plastering in Cement Mortar, Floor finishes, white wash, colour wash; Standard schedule of rates, lead and lift, preparation of lead statement; Computation of earth work - Mid-ordinate, Mean Sectional area, Trepezoidal method, Prismoidal Rule; Approximate estimate - Plinth area and cubic rate estimate.

10. SURVEYING

    Principle and classification of surveying, chain surveying; Compass surveying; Levelling and contouring; Theodolite surveying; curves; Introduction and Fundamental concepts of electronic measuring instruments - EDM, Total station, GIS & GPS.

    PAER-II: ELECTRICAL ENGINEERING (Degree Level)

    Electric Circuits and Fields: Network graph, KCL, KVL, node and mesh analysis, transient response of dc and ac networks; sinusoidal steady-state analysis, resonance, basic filter concepts; ideal current and voltage sources, Thevenin's, Norton's, Superposition, Maximum Power Transfer and Reciprocity theorems; two-port networks, three phase circuits; Star, Delta connections, Measurement of power by two-wattmeter method; Fourier, Laplace and Z transforms; Gauss Theorem, electric field and potential due to point, line, plane and spherical charge distributions; Ampere's and Biot-Savart's laws; inductance; dielectrics; capacitance.

    Electrical Machines: Single phase transformer - equivalent circuit, phasor diagram, tests, regulation and efficiency; three phase transformers - connections, parallel operation; auto-transformer; energy conversion principles; DC machines - types, windings, generator and motor characteristics, losses and efficiency, armature reaction and commutation, starting and speed control of motors, tests; three phase induction motors - principles, types, performance characteristics, starting and speed control; single phase induction motors; synchronous machines - performance, regulation and parallel operation of alternators, motor starting, characteristics and applications; servo motors.

    Power Systems: Basic power generation concepts, Economic aspects, Types of Tariffs; transmission line models and performance; cable performance, insulators, Sag and Tension; corona and radio interference; distribution systems; per-unit quantities; bus impedance and admittance matrices; load flow study; voltage control; power factor correction; economic operation; Load Frequency Control; symmetrical components; symmetrical & unsymmetrical fault analysis; principles of over-current, differential and distance protection; Generator protection, Transformer protection, Feeder protection, static relays; circuit breakers; Power system stability concepts, swing equation, power angle curve, solution of swing equation, equal area criterion.

    Control Systems: Principles of feedback; transfer function; block diagrams; steady- state errors; Routh and Nyquist techniques; Bode plots; root loci; lag, lead and lead-lag compensation; state space model; state transition matrix, controllability and observability.

    Electrical and Electronic Measurements: DC, AC Bridges, potentiometers; PMMC, moving iron, dynamometer and induction type instruments; measurement of voltage, current, power, energy and power factor; shunts, multipliers; instrument transformers; digital voltmeters, CRO; phase, time and frequency measurements using lissajous patterns; error analysis.

    Analog and Digital Electronics: Characteristics of p-n junction diode, Zener diode, BJT, FET; amplifiers - biasing, equivalent circuit and frequency response; oscillators and feedback amplifiers; operational amplifiers - characteristics and applications; simple active filters; VCOs and timers; Boolean Algebra, mizimizition of switching functions combinational and sequential logic circuits; schimitt trigger, multi vibrators Flip flops, counters and registers, sample and hold circuits; A/D and D/A converters; microprocessor basics.(8085 & 8086), architecture, programming and interfacing.

    Power Electronics: Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs - static characteristics and principles of operation; triggering circuits commutation circuits; phase control rectifiers; bridge converters - fully controlled and half controlled; dual converters, principles of choppers, inverters, cyclo-converters and ac voltage controllers.

    Electric Drives: Four quadrant operation, Types of loads, Energy loss during starting and braking of dc and ac motors, Types of braking in dc & ac motors, Basis concepts of converter and chopper fed dc drives; V/f control, static rotor resistance control and slip power recovery scheme of 3-phase induction motor drives.

    Utilization: High frequency eddy current heating, dielectric heating, Arc furnace, electric arc welding & electric resistance welding, Illumination: Laws of illumination, MSCP, SV & MV lamps, Factory, street & flood lighting, Electric traction and track electrification, Speed-time curves, Tractive effort, Specific energy consumption, Mechanism of train movement, adhesive weight and coefficient of adhesion. DC motor series parallel control, energy saving.

    Post Code No.3

    Scheme and Syllabus for the post of Assistant Executive Engineer (Mechanical) in Ground Water Department.

    Scheme of Examination

    Part:A: WRITTEN EXAMINATION (Objective Type)	No.of Questions	Duration(Minute s)	Maximum Marks
    Paper-I: General Studies and General Abilities	150	150	150
    Paper-II: Mechanical Engineering (Degree Level)	150	150	300
    Part: B: Interview			50
    Total			500

    Syllabus

    Paper-I: GENERAL STUDIES AND GENERAL ABILITIES

    1. Current affairs - Regional, National and International.

    2. International Relations and Events.

    3. General Science; India's Achievements in Science and Technology. 4.Environmental issues; Disaster Management- Prevention and Mitigation strategies.

1. Economic and Social Development of India and Telangana.

2. Physical, Social and Economic Geography of India.

3. Physical, Social and Economic Geography and Demography of Telangana.

4. Socio-economic, Political and Cultural History of Modern India with special emphasis on Indian National Movement.

5. Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.

6. Indian Constitution; Indian Political System; Governance and Public Policy.

7. Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and inclusive policies.

8. Society, Culture, Heritage, Arts and Literature of Telangana.

9. Policies of Telangana State.

10. Logical Reasoning; Analytical Ability and Data Interpretation.

11. Basic English. (10th Class Standard)

PAPER-II: MECHANICAL ENGINEERING (DEGREE LEVEL)

(Common Syllabus for B.E. Degree (Mechanical), or B.Tech (Agricultural Engineering) or an Equivalent Qualification).

Section I: Applied Mechanics and Design

1. Engineering Mechanics: Free-body diagrams and equilibrium; trusses and frames; virtual work; kinematics and dynamics of particles and of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations, collisions.

2. Mechanics of Materials: Stress and strain, elastic constants, Poisson's ratio; Mohr's circle for plane stress and plane strain; thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams; torsion of circular shafts; Euler's theory of columns; energy methods; thermal stresses; strain gauges and rosettes; testing of materials with universal testing machine; testing of hardness and impact strength.

3. Theory of Machines: Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; cams; gears and gear trains; flywheels and governors; balancing of reciprocating and rotating masses; gyroscope.

4. Vibrations: Free and forced vibration of single degree of freedom systems, effect of damping; vibration isolation; resonance; critical speeds of shafts.

5. Machine Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints, keys, shafts, gears, rolling and sliding contact bearings, brakes and clutches, springs.

Section II: Fluid Mechanics and Thermal Sciences

1. Fluid Mechanics: Fluid properties; fluid statics, manometry, buoyancy, forces on submerged bodies, stability of floating bodies; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli's equation; dimensional analysis; viscous flow of incompressible fluids, boundary layer, elementary turbulent flow, flow through pipes, head losses in pipes, bends and fittings.

2. Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept and electrical analogy, heat transfer through fins; unsteady heat conduction, lumped parameter system, thermal boundary layer, dimensionless parameters in free and forced convective heat transfer, heat transfer correlations for flow over flat plates and through pipes, effect of turbulence; heat exchanger performance, LMTD and NTU methods; radiative heat transfer, Stefan- Boltzmann law, Wien's displacement law, black and grey surfaces, view factors, radiation network analysis.

3. Thermodynamics: Thermodynamic systems and processes; properties of pure substances, behavior of ideal and real gases; zeroth and first laws of thermodynamics, calculation of work and heat in various processes; second law of thermodynamics; availability and irreversibility; thermodynamic relations.

4. Power Engineering: Air compressors; vapour and gas power cycles, concepts of regeneration and reheat.

5. I.C. Engines: Air-standard Otto, Diesel and dual cycles.

6. Refrigeration and air-conditioning: Vapour and gas refrigeration and heat pump cycles; basic psychrometric processes.

7. Turbomachinery: Impulse and reaction principles, velocity diagrams, Pelton- wheel, Francis and Kaplan turbines.

Section III: Materials, Manufacturing and Industrial Engineering

1. Engineering Materials: Structure and properties of engineering materials, phase diagrams, heat treatment, stress-strain diagrams for engineering materials.

2. Casting, Forming and Joining Processes: Different types of castings, design of patterns, moulds and cores; solidification and cooling; riser and gating design. Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk metal forming processes such as forging, rolling, extrusion, drawing; and sheet metal forming processes such as shearing, deep drawing, bending; principles of powder metallurgy. Principles of welding, brazing, soldering and adhesive bonding.

3. Machining and Machine Tool Operations: Mechanics of machining; basic machine tools; single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, design of jigs and fixtures.

4. Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and surface finish measurement; machine tool; alignment and testing methods; tolerance analysis in manufacturing and assembly.

5. Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools.

6. Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning.

7. Inventory Control: Deterministic models; safety stock inventory control systems.

8. Operations Research: Linear programming, simplex method transportation, assignment, network flow models, simple queuing models, PERT and CPM.

   Post code No: 06

   SCHEME AND SYLLABUS FOR THE POST OF ASSISTANT EXECUTIVE ENGINEERS (CIVIL/MECHANICAL) IN TRIBAL WELFARE ENGINEERING DEPT.

   SCHEME OF EXAMINATION

   Part: A: WRITTEN EXAMINATION (Objective Type)	No. of Questions	Duration (Minutes)	Maximum Marks
   Paper-I: General Studies And General Abilities	150	150	150
   Paper-II: Common Syllabus for Civil/Mechanical Engineering	150	150	300
   Part: B: Interview			50
   Total			500

   Syllabus

   Paper-I: GENERAL STUDIES AND GENERAL ABILITIES

   1. Current affairs - Regional, National and International.

   2. International Relations and Events.

   3. General Science; India's Achievements in Science and Technology.

   4. Environmental issues; Disaster Management- Prevention and Mitigation Strategies.

   5. Economic and Social Development of India and Telangana.

   6. Physical, Social and Economic Geography of India.

   7. Physical, Social and Economic Geography and Demography of Telangana.

   8. Socio-economic, Political and Cultural History of Modern India with special emphasis on Indian National Movement.

   9. Socio-economic, Political and Cultural History of Telangana with special emphasis on Telangana Statehood Movement and formation of Telangana state.

   10. Indian Constitution; Indian Political System; Governance and Public Policy.

   11. Social Exclusion; Rights issues such as Gender, Caste, Tribe, Disability etc. and inclusive policies.

   12. Society, Culture, Heritage, Arts and Literature of Telangana.

   13. Policies of Telangana State.

   14. Logical Reasoning; Analytical Ability and Data Interpretation.

   15. Basic English. (10th Class Standard)

Paper-II: COMMON SYLLABUS FOR CIVIL & MECHANICAL ENGINEERING

STRENGTH OF MATERIALS:-

Simple Stresses and Strains: Types of stresses and strains, Stress and strain relationship, Hook's Law, working stress and factor of safety, Poisson's ratio, Elastic constants and their relations, Compound bars, Thermal stresses, Compound stresses, Mohr's circle for plane stress and plane strain, Principal stresses and planes; Testing of materials with UTM.

Shear Force and Bending Moment Diagrams: S.F.D. and B.M.D. for cantilevers, simply supported beams and over hanging beams subjected to point loads and uniformly distributed loads. Relations among load, shear force and bending moment.

Bending and Shear Stress: Basic equation; M/I = F/Y = E/R - Distribution of bending and shear stresses across various cross sections such as rectangular, circular, I and T sections, Torsion of circular shafts; power transmission.

Columns and Struts: Euler's theory and Rankine's Theory, Socant and Perry formulae for eccentrically loaded columns.

Deflections and Slopes: Slopes and deflections in cantilevers, simply supported beams, propped beams and fixed beams subjected to point loads and uniformly distributed loads.

FLUID MECHANICS AND HYDRAULIC MACHINERY:

Fluid Statics: Properties of fluids, Hydrostatic force on a plane and curved area, Centre of pressure and its applications.

Fluid Dynamics: Convective and local acceleration, Euler's equation of motion and its integration, Bernoulli's equation of motion and its application, flow in curved path. Free and forced vortex.

Flow Measurements: Notches and weirs, venture meters, pitot tube, nozzle meter, current meter.

Compressible Flow: Velocity of pressure wave, wave velocity for adiabatic and isothermal compression, Basic equations of one-dimensional flow; Continuity, energy and momentum equations.

Flow through Pipes: Reynold's number, formulae for laminar flow through circular pipes, Turbulent flow, Darcy Weisbsch equation, friction factor, head losses in pipes, bends and fittings.

Turbines: Classification, specific speed, velocity triangles, Principles of design of reaction and impulse turbines, characteristic curves.

Pumps: Centrifugal pump, velocity triangles, Work done and efficiency, minimum starting speed, loss of head; specific speed and characteristic curves for centrifugal pumps.

ANNEXURE - IV

INSTRUCTIONS TO CANDIDATES:

1. GENERAL INSTRUCTIONS TO CANDIDATES

   1. Candidates are directed to follow the Commission's Website (www.tspsc.gov.in) regularly to Know the latest developments regarding the Recruitment, dates of Examination, calling of candidates for verification of Certificates/ Interviews/ Results etc.

   2. The candidates must note that his/her admission to the examination is strictly provisional. The mere fact that an Admission to the examination does not imply that his/her candidature has been finally cleared by the Commission or that the entries made by the candidate in his/her application have been accepted by the Commission as true and correct. The candidates have to be found suitable after verification of original certificates; and other eligibility criteria. The Applicants have to upload his/her scanned recent colour passport photo and signature to the Application Form. Failure to produce the same photograph, if required, at the time of interview/ verification, may lead to disqualification. Hence the candidates are advised not to change their appearance till the recruitment process is complete.

   3. The candidates are not allowed to bring any Electronic devices such as mobile / cellphones, Calculators, tablets, iPad, Bluetooth, pagers, watches to examination centre. Loaning and interchanging of articles among the candidates is not permitted in the examination hall and any form of malpractice will not be permitted in the exam hall.

   4. The candidates are expected to behave in orderly and disciplined manner while writing the examination. If any candidate takes away Answer Sheet of OMR based examination, the candidature will be rejected and in case of impersonation/ disorder/ rowdy behaviour during Examination, necessary F.I.R. for this incident will be lodged with concerned Police Station, apart from disqualifying his / her candidature.

   5. Candidates trying to use unfair means shall be disqualified from the selection. No correspondence whatsoever will be entertained from the candidates.

   6. The Penal Provisions of Act 25/97 published in the A.P. Gazette No. 35, Part-IV.B Extraordinary dated: 21/08/1997 shall be invoked if malpractice and unfair means are noticed at any stage of the Examination.

2. INSTRUCTIONS REGARDING OFFLINE OMR BASED EXAMINATION FOR CANDIDATES

   1. The candidates have to report 30 minutes before to the examination venue to record their thumb impression on Biometric system.

   2. The candidates should go through the instructions given on the cover page of test booklet and carefully write his/her Register Number, Subject / Subject Code, Booklet Series, Name of the Examination Centre etc., in the Answer Sheet, which will be provided to him/her in the examination hall.

   3. Since the answer sheets are to be scanned (valued) with Optical Mark Scanner system, the candidates have to USE BALL POINT PEN (BLUE/BLACK) ONLY FOR MARKING THE ANSWERS. The candidates will be supplied OMR Sheet consists of two copies i.e., the Original Copy (Top Sheet) and Duplicate Copy (Bottom Sheet). The candidate is required to use Ball Point Pen (Blue or Black) for filling the relevant blocks in the OMR Sheet including bubbling the answers. After writing the examination the candidate has to handover the original OMR sheet (Top Sheet) to the invigilator in the examination hall, if any candidate takes away the original OMR Sheet (Top Sheet) his/her candidature will be rejected. However the candidate is permitted to take away the duplicate (Bottom Sheet) OMR Sheet for his/her record. The candidates should bring Ball Point Pen (Blue/Black and smooth writing pad) to fill up relevant columns on the Answer Sheet. The candidate must ensure encoding the Register Number, Subject/Subject Code, Booklet Series, Name of the Examination Centre, Signature of the Candidate and Invigilator, etc., on the O.M.R. Answer sheet correctly, failing which the Answer sheet will be rejected and will not be valued. Use of whitener on OMR Sheet will lead to disqualification.

   4. The OMR Sheet is to bubble only by Ball Point Pen (Blue/Black). Bubbling by Pencil / Ink Pen / Gel Pen is not permitted in this examination.

   5. The candidates should satisfy the Invigilator of his identity with reference to the signature and photographs available on the Nominal Rolls and Hall Ticket.

   6. No candidate should leave the examination hall till expiry of full-time.

   7. The Commission would be analysing the responses of a candidate with other appeared candidates to detect patterns of similarity. If it is suspected that the responses have been shared and the scores obtained are not genuine/ valid, the Commission reserves the right to cancel his/ her candidature and to invalidate the Answer Sheet.

   8. (i)Wherever Written Examination is held, only those candidates who are totally blind are allowed to write the examination with the help of scribe and 10 minutes extra time is permitted to them per hour.

      1. An extra time of 20 minutes per hour is also permitted for the candidates with locomotor disability and CEREBRAL PALSY where dominant (writing) extremity is affected for the extent slowing the performance of function (Minimum of 40% impairment). No scribe is allowed to such candidates.

      2. Scribe will be provided to those candidates who do not have both the upper limbs for Orthopedically Handicapped. However, no extra time will be granted to them.

      1. The scribe should be from an academic discipline other than that of the candidate and the academic qualification of the scribe should be one grade lower than the stipulated eligibility criteria.

      2. The candidate as well as the scribe will have to give a suitable undertaking confirming the rules applicable

   9. If the candidate noticed any discrepancy printed on Hall ticket as to community, date of birth etc., they may immediately bring to the notice of Commission's officials/Chief Superintendent in the examination centre and necessary corrections be made in the Nominal Roll, in the Examination Hall against his/her Hall Ticket Number for being verified by the Commission's Office.

3. INSTRUCTIONS REGARDING ONLINE EXAMINATION FOR CANDIDATES

   1. Candidates shall report at the venue one and half hour (90 minutes) before the Commencement of Examination as the candidates have to undergo certain procedural formalities required for online examination.

   2. Date and Time of the Examination as per Hall-Ticket

   3. The examination link with the login screen will already be available on your system. Please inform the invigilator if this is not the case.

   4. 10 minutes prior to the exam, you'll be prompted to login. Please type the Login ID (Roll No) and the Password (Password for Candidate will be given on exam day) to proceed further.

   5. Invigilator will announce the password at 09.50 AM and 02.20 PM.

   6. Copying or noting down questions and/or options is not allowed. Severe action will be taken if any candidate is found noting down the questions and/or options.

   7. After logging in, your screen will display:

1. After answering a question, click the SAVE & NEXT button to save your response and move onto the next question.

2. Click on Mark for Review & NEXT to mark your question for review, and then go to the next question.

3. To clear any answer chosen for a particular question, please click on the CLEAR RESPONSE button.

4. A summary of each section, (i.e. questions answered, not answered, marked for review) is available for each section. You have to place the cursor over the section name for this summary.

5. In case you wish to view a larger font size, please inform the Invigilator. On the Invigilator's confirmation, click on the font size you wish to select. The font size will be visible on the top.

6. You may view INSTRUCTIONS at any point of time during exam, by clicking on the INSTRUCTIONS button on your screen.

7. The SUBMIT button will be activated after 150 Minutes. It will continue for an additional 50 Minutes for PWD candidate eligible for compensatory time. Please keep checking the timer on your screen.

8. In case of automatic or manual log out, all your attempted responses will be saved. Also, the exam will start from the time where it had stopped.

9. You will be provided a blank sheet for rough work. Do write your Login ID and Password on it. Please ensure that you return it to the invigilator at the end of the exam after tearing ONLY the password from it.

10. Please don't touch the key board as your exam ID will get locked. If your ID gets locked, please inform a nearby invigilator who will help in unlocking your ID and then you can continue with the exam.

11. Please inform the invigilator in case of any technical issues.

12. Please do not talk to or disturb other candidates.

13. In case you are carrying articles other than the admit card, photo identity proof and pen, please leave them outside the exam room.

14. You cannot leave exam room before submitting the paper. Please inform the invigilator if you want to use the wash room.

	Start Date	End Date
Notification Issued	02-Jun-2017
Applications	06-Jun-2017	11-Jul-2017
Examinations (Mains)	05-Aug-2017	06-Aug-2017

• Organization : Telangana State Public Service Commission
• Organization City, State : , telangana
• Organization Website : http://www.tspsc.gov.in