62. PHC-HH=1, OH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Welding/Fabrication (CoE) with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Welding passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: FPL -6 (35400-112400) Pre-Revised 9300-34800+3600GP.

Age: 17-42 Years Pay Scale: FPL -6 (35400-112400).

Cat. No.4	16 posts of Advertised).		Craft	Stenography			Hindi	Instructor		(Practical)					(Re
	(GEN=2, SC=3, BCA=3, BCB=2, ESM-BCB=1) TOTAL=16.				ESM GEN=3,				ESM SC=1,			ESM BCA=1,
E.Q.	(i) Full time regular mode bachelor degree with minimum 60% marks in Hindi subject, from a recognized University;
	(ii) National Trade Certificate/National Apprenticeship Certificate shorthand Hindi trade passed with minimum 70% marks and CITC Steno Hindi;															in in
	(iii) Shorthand at a speed of 80 words per minute and 15 words per minute Transcriptions thereof and 30 word per minute in typing in Hindi;
	(iv) O level certificate in Computer from Department of Electronics and Information Technology (DOEACC), Government of India or its equivalent course from Haryana State Board of Technical Education/recognized university;
	v) Hindi/ Sanskrit upto Matric Standard or higher education.
Age: Pay Scale:	17-42 Years FPL -6 (35400-112400).
Cat. No.5	19 posts of Craft Stenography English Instructor (Practical) (Re-Advertised).
	(GEN=3, SC=5, BCA=4, BCB=2, ESM GEN=3, ESM BCA=1, ESP BCA=1) TOTAL=19
E.Q.	(i) Bachelor degree with minimum 60% marks in English subject, from a recognized University;
	(ii) National Trade Certificate/National Apprenticeship minimum 70% marks with CITC in Steno (English);										Certificate			with
	(iii) Shorthand at a speed of 100 words per minute and 15 words per minute transcription thereof and 40 words per minute typing in English;
	(iv) O level certificate in Computer from Department of Electronics and Information Technology (DOEACC), Government of India or its equivalent from Haryana State Board of Technical Education/recognized university;
	v) Hindi/ Sanskrit upto Matric Standard or higher education.
Age: Pay Scale:		17-42 Years FPL -6 (35400-112400).
Cat. No.6	5	posts of Health Sanitary Instructor (Practical) (Re-Advertised).
	(GEN=3, SC=1, BCA=1) Total=5
E.Q.	i) National Trade Certificate/ National Apprenticeship Certificate Sanitary Inspector;												in Health
	ii) Five years practical/teaching recognized Institution/ Industrial Act, including training period;					experience in concerned trade from concern covered under Apprenticeship
	iii) Hindi/ Sanskrit upto Matric Standard or higher education;

Note: Preference shall be given to candidate possessing Craft Instructor Training Course/Principals of Teaching course (P.O.T.) from D.G.E & T recognized institute.

Cat. No.7 1 post of Desk Top Publisher Operator Instructor (Practical).

(GEN=1).

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Desktop publisher operator with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Desktop publisher operator passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: FPL -6 (35400-112400).

Cat. No.8 2 posts of Surveyor Instructor (Practical).

(SC=1, BCA=1) Total=2.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Surveyor with Crafts Instructor Course (CITC) in relevant trade with five years practical/teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Surveyor passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: FPL -6 (35400-112400).

Cat. No.9 42 posts of Mechanic Refrigeration & Air-Conditioning Instructor (Practical) (Re-Advertised).

(GEN=8, SC=8, BCA=7, BCB=3, ESM-GEN=6, ESM-SC=3, ESM-BCA=1, ESM-BCB=3, ESP-SC=1, ESP-BCA=1, ESP-BCB=1) TOTAL=42, PHCHH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Refrigeration & Air Conditioning with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Refrigeration & Air Conditioning passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: FPL -6 (35400-112400).

Cat. No.10 94 posts of Electrician Instructor (Practical) (Re-Advertised).

(GEN=24, SC=21, BCA=15, BCB=9, ESM-GEN=10, ESM-SC=4, ESM-BCA=3, ESM-BCB=3, ESP GEN=1, ESP-SC=2, ESP-BCA=1, ESP-BCB=1) TOTAL=94. PHC-VH=1, HH=1, OH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Electrician with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Electrician passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: FPL -6 (35400-112400).

Cat. No.11 26 post of Mechanic Electronics Instructor (Practical) (Re-Advertised).

(GEN=1, SC=6, BCA=6, BCB=3, ESM-GEN=6, ESM-SC=1, ESM-BCA=1, ESM-BCB=1, ESP-SC=1)TOTAL=26, PHC-OH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Electronics with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.12 3 post of Interior Decoration and Designing Instructor (Practical) (Re-Advertised).

(GEN=3).

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Interior Decoration and Designing with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Interior Decoration and Designing passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.13 6 post of Mechanic Consumer Electronics Instructor (Practical) (Re-Advertised).

(SC=3, BCA=1, BCB=1, ESM BCA=1) TOTAL=6.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Consumer Electronics with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Consumer Electronics/Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.14 3 posts of Mechanic Machine Tool maintenance Instructor (Practical) (Re-Advertised).

(GEN=3).

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Machine Tool Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Machine Tool Maintenance passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.15 8 posts of Sheet Metal Worker Instructor (Practical) (Re-Advertised).

(SC=2, BCA=1, BCB=1, ESM-GEN=2, ESM-BCA=1, ESP-BCA=1) Total=8

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Sheet Metal with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Sheet Metal passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.16 34 posts of Wireman Instructor (Practical) (Re-Advertised).

(GEN=2, SC=7, BCA=8, BCB=4, ESM-GEN=4, ESM-SC=1, ESM-BCA=1, ESM-BCB=3, ESP-GEN=1, ESP-SC=1, ESP-BCA=1, ESP-BCB=1) TOTAL=34. PHC-HH=1

E.Q. i) National Trade certificate/ National Apprenticeship Certificate in Wireman with crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Wireman passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.17 30 posts of Millwright Mechanic (Mechanical) Instructor (Practical) (Re-Advertised).

(GEN=11, SC=5, BCA=3, BCB=3, ESM-GEN=2, ESM-SC=1, ESM-BCA=2,

ESM-BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=30, PHC-HH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Millwright Mechanic/Mechanic Machine Tool Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Millwright Mechanic/Mechanic Machine Tool Maintenance passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.18 13posts of Mill Wright Mechanic (Electrical/Electronics) Instructor (Practical) (Re-Advertised).

(GEN=5, SC=3, BCA=2, BCB=1, ESM-GEN=2) TOTAL=13.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Electrician/Electronics/Instrument Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Electrician/ Electronics/Instrument Mechanic passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.19 20 posts of Painter (General) Instructor (Practical) (Re-Advertised).

(GEN=6, SC=4, BCA=4, BCB=2, ESM-GEN=2, ESM-SC=1, ESM-BCB=1)

TOTAL=20.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Painter(General) with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Painter (General) passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.20 3 posts of Plastic Processing Operator Instructor (Practical) (Re-Advertised).

(BCB=1, ESM-SC=1, ESM-BCA=1) Total=3.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Plastic Processing Operator with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate/National Apprenticeship Certificate in Plastic Processing Operator passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.21 1 post of Foundry man (Moulder) Instructor (Practical) (Re-Advertised).

(ESM BCB=1)

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Foundry Man with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Foundry Man passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.22 32 posts of Plumber Instructor (Practical) (Re-Advertised).

(GEN=5, SC=8, BCA=6, BCB=2, ESM-GEN=5, ESM-SC=1, ESM-BCA=1,

ESM-BCB=3, ESP-BCB=1) TOTAL=32, PHC-HH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Plumber with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Plumber passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.23 5 posts of Instrument Mechanic Instructor (Practical) (Re-Advertised).

(SC=1, BCB=1, ESM GEN=1, ESM SC=1, ESM BCA=1) TOTAL=5

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Instrument Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Instrument Mechanic passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.24 3 posts of Mechanic Agriculture Machinery Instructor (Practical) (Re-Advertised).

(GEN=3).

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Agriculture Machinery with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tractor Mechanic / Farm Mechanic and Agriculture Mechanic Machinery passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.25 3 posts of Architectural Assistant (Practical) (Re-Advertised).

(BCA=1, BCB=1, ESM GEN=1) Total =3.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Architectural Assistant with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Architectural Assistant passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.26 1 post of Information Technology and Electronics System Maintenance Instructor (Practical) (Re-Advertised).

(GEN=1).

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Information Technology and Electronics System Maintenance with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Information Technology and Electronics System Maintenance / Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.27 7 posts of Mechanic Computer Hardware Instructor (Practical) (Re-Advertised).

(GEN=2, SC=1, BCA=2, BCB=1, ESM GEN=1) Total=7

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Computer Hardware with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/teaching experience including training period.

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship certificate in Mechanic Computer Hardware/Electronics passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.28 13 posts of Tractor Mechanic Instructor (Practical) (Re-Advertised).

(GEN=4, SC=3, BCA=2, BCB=2, ESM GEN=1,ESM BCA=1) Total=13.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Tractor Mechanic with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tractor Mechanic/ Farm Mechanic and Agriculture Mechanic Machinery passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.29 35 posts of Machinist Instructor (Practical) (Re-Advertised).

(GEN=1, SC=11, BCA=5, BCB=4, ESM GEN=7, ESM SC=2, ESM BCA=1, ESM BCB=1, ESP-GEN=1, ESP-SC=1, ESP-BCA=1) TOTAL=35, PHCOH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Machinist with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade isnot available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Machinist passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.30 31 posts of Carpenter Instructor (Practical) (Re-Advertised).

(GEN=1, SC=9, BCA=3, BCB=6, ESM GEN=6, ESM SC=1, ESM BCB=3, ESP-GEN=1, ESP-BCB=1) TOTAL=31, PHC-OH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Carpenter with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Carpenter passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.31 23 posts of Mechanic Diesel Instructor (Practical) (Re-Advertised).

(GEN=4, SC=6, BCA=2, BCB=4, ESM GEN=1, ESM SC=1, ESM BCA=2, ESM BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=23.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Diesel with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Diesel/ Mechanic Motor Vehicle passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.32 27 posts of Mechanic Motor Vehicle Instructor (Practical) (Re-Advertised).

(GEN=2, SC=8, BCA=6, BCB=2, ESM GEN=5, ESM SC=1, ESM BCA=1, ESM BCB=1, ESP-BCB=1) TOTAL=27, PHC-OH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Mechanic Motor Vehicle with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Mechanic Motor Vehicle passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.33 3 posts of Machinist Grinder Instructor (Practical) (Re-Advertised).

(SC=2, BCA=1) Total=3.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Machinist (Grinder) with Crafts Instructor Training Course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Machinist (Grinder) passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.34 4 posts of Tool & Die Maker(Dies & Moulds) Instructor (Practical) (Re-Advertised).

(BCA=1, ESM GEN=1, ESM BCB=1, ESP SC=1) Total=4.

E.Q. i) National Trade certificate/ National Apprenticeship Certificate in Tool and Dies Maker (Dies and Moulds) with crafts instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Tool and Dies Maker passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.35 44 posts of Draughtsman (Civil) Instructor (Practical) (Re-Advertised).

(GEN=8, SC=11, BCA=8, BCB=5, ESM-GEN=6, ESM-SC=1, ESM-BCA=1, ESM-BCB=2, ESP-GEN=1, ESP-BCB=1) TOTAL=44, PHC-HH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Draughtsman Civil with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Draughtsman Civil passed with minimum 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.36 26 posts of Draughtsman (Mechanical) Instructor (Practical) (Re-Advertised).

(GEN=1, SC=6, BCA=6, BCB=2, ESM-GEN=4, ESM-SC=1, ESM BCA=2, ESM-BCB=2, ESP-BCA=1, ESP-BCB=1) TOTAL=26 PHC-HH=1.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate in Draughtsman(Mechanical) with Crafts Instructor Training course (CITC) in relevant trade with five years practical/ teaching experience including training period;

In case CITC course in relevant trade is not available/ introduced in any NCVT affiliated institute then the candidate must possess National Trade Certificate / National Apprenticeship Certificate in Draughtsman (Mechanical) passed with 70% marks and NCVT approved POT course, with eight years practical/ teaching experience including training period.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note:a) Experience should be in the concerned trade/ field in an Industrial establishment covered under Apprenticeship Act or in a recognized technical institution;

b) In case of Ex-serviceman, Craft Instructor Training course shall be relaxed if the candidate possesses equivalent technical qualification as certified by Director General, Rehabilitation, Ministry of Defence, or Director General Employment and Training, Government of India.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.37 3 posts of Craft Instructor (women) Fashion Technology (Practical) (Re-Advertised).

(GEN=2, SC=1) Total=3

E.Q. i) National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training Course (TTC) in Fashion Technology with five year Practical/teaching experience including training period;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400).

Cat. No.38 20 posts of Craft Instructor (women) Cutting & Sewing (Practical) (Re-Advertised).

(GEN=2, SC=6, BCA=2, BCB=2, ESM GEN=5, ESM SC=1, ESM BCA=1, ESP SC=1) Total = 20.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training Course (TTC) in Cutting & Sewing/ Dress Making/ Fashion Technology with five year practical/ teaching experience including training period;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400).

Cat. No.39 18 posts of Craft Instructor (women) Hair & Skin Care (Practical) (Re-Advertised).

(GEN=1, SC=4, BCA=3, BCB=2, ESM GEN=3, ESM SC=1, ESM BCA=2, ESM BCB=1, ESP BCA=1) Total = 18.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teaching Training Course (TTC) in Hair & Skin Care with five year practical/ teaching experience including training period;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400).

Cat. No.40 20 posts of Craft Instructor (women) Dress Making (Practical) (Re-Advertised).

(GEN=4, SC=5, BCA=2, BCB=2, ESM GEN=2, ESM SC=1, ESM BCA=1, ESM BCB=1, ESP SC=1, ESP BCA=1) TOTAL=20.

E.Q. i) National Trade Certificate/ National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teaching Training Course (TTC) in Dress Making/ Two years Fashion Technology with five year practical/ teaching experience including training period;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400).

Cat. No.41 5 posts of Craft Instructor (women) Embroidery & Needle Work (Practical) (Re-Advertised).

(SC=1, BCB=2, ESM GEN=1, ESM BCB=1) Total=5.

E.Q. i) National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training Course (TTC) in Embroidery and Needle work/Two years Fashion Technology with five year Practical/teaching experience including training period;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400).

Cat. No.42	13 posts of Craft Instructor (Women) Computer Aided Embroidery (Practical) (Re-Advertised).
	(GEN=5, SC=3, BCA=2, BCB=1, ESM-GEN=2) Total=13.
E.Q.	i) National Trade Certificate /National Apprenticeship Certificate with Craft Instructor Training Course (CITC) or Teacher Training course (TTC) in Computer Aided Embroidery/ Embroidery with five year Practical/teaching experience including training period:
	ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years Pay Scale: Pay Matrix Level 6 (35400-112400).

Fee Details :

Sr. No.	Category of post	General		SC/BC candidates of Haryana State only
		Male/Female	Female of Haryana resident only	Male	Female
1.	1 to 42	`150/	`75/	`35/	`18/
3.	Ex-Serviceman of Haryana	No Charges

The dependent of ESM and DFF are required to pay the fee as for General, SC or BCA & BCB Candidates as case may be. Fee once sent with the application form is neither transferable nor refundable/adjustable. The fee should be deposited through Net banking or e-Challan in any branch of State Bank of India, Punjab National Bank and IDBI Bank etc. available on payment site. Candidates are advised to choose their mode of payment i.e. Net banking or e-Challan while applying online.

Note 1. The posts indicated below were advertised earlier by the Haryana Staff Selection Commission, Panchkula : -

Sr. No.	Name of the Post	New Cat No.	Old Advt. No.	Old Cat. No.
1	Turner Instructor (Practical)	1	1/2013 10/2017	68 45
2	Fitter Instructor (Practical)	2	1/2013 10/2017	16 42
3	Welder (Gas & Electric) Instructor (Practical)	3	1/2013 10/2017	50 38
4	Craft Stenography Hindi Instructor (Practical)	4	1/2013 9/2017	11 14
5	Craft Stenography English Instructor (Practical)	5	1/2013 9/2017	7 16
6	Health Sanitary Instructor (Practical)	6	9/2017	11
5	Mechanic Refrigeration & Air-Conditioning Instructor (Practical)	9	1/2013 9/2017	34 37
6	Electrician Instructor (Practical)	10	1/2013 10/2017	42 4
7	Electronics Mechanic Instructor (Practical)	11	1/2013 10/2017	64 2
8	Interior Decoration and Designing Instructor (Practical)	12	10/2017	13

9	Mechanic Consumer Electronics Instructor (Practical)	13	10/2017	17
10	Mechanic Machine Tool maintenance Instructor (Practical)	14	10/2017	15
11	Sheet Metal Worker Instructor (Practical)	15	1/2013 10/2017	58 51
12	Wireman Instructor (Practical)	16	1/2013 9/2017	62 31
13	Millwright Mechanic (Mechanical) Instructor (Practical)	17	1/2013 9/2017	48 29
14	Millwright Mechanic (Electrical/ Electronics) Instructor (Practical)	18	1/2013 9/2017	22 27
15	Painter (General) Instructor (Practical)	19	1/2013 9/2017	40 40
16	Plastic Processing Operator Instructor (Practical)	20	1/2013 10/2017	30 24
17	Foundry man (Moulder) Instructor (Practical)	21	1/2013 10/2017	18 9
18	Plumber Instructor (Practical)	22	1/2013 9/2017	46 38
19	Instrument Mechanic Instructor (Practical)	23	9/2017	35
20	Mechanic Agriculture Machinery Instructor (Practical)	24	10/2017	33
21	Architectural Assistant (Practical)	25	9/2017	25
22	Information Technology and Electronic System Maintenance Instructor (Practical)	26	1/2013 10/2017	20 11
23	Mechanic Computer Hardware (Practical)	27	10/2017	52
24	Tractor Mechanic Instructor (Practical)	28	1/2013 10/2017	26 48
25	Machinist Instructor (Practical)	29	1/2013 9/2017	37 48
26	Carpenter Instructor (Practical)	30	1/2013 9/2017	36 33
27	Mechanic Diesel Instructor (Practical)	31	1/2013 9/2017	32 43
28	Mechanic Motor Vehicle Instructor (Practical)	32	1/2013 10/2017	66 41
29	Mechanic Grinder Instructor (Practical)	33	1/2013 10/2017	44 47
30	Tool & Die Maker(Dies & Moulds) Instructor (Practical)	34	10/2017	6
31	Draughtsman (Civil) Instructor (Practical)	35	1/2013 9/2017	28 45
32	Draughtsman (Mechanical) Instructor (Practical)	36	1/2013 9/2017	54 47
33	Craft Instructor (women) Fashion Technology (Practical)	37	1/2013 9/2017	71 23
34	Craft Instructor (women) Cutting & Sewing (Practical)	38	1/2013 9/2017	76 9
35	Craft Instructor (women) Hair & Skin Care (Practical)	39	1/2013 9/2017	78 5
36	Craft Instructor (women) Dress Making (Practical)	40	1/2013 9/2017	80 7
37	Craft Instructor (women) Embroidery & Needle Work (Practical)	41	1/2013 9/2017	74 21
38	Craft Instructor (Women) Computer Aided Embroidery (Practical)	42	9/2017	19

Against these posts no recruitment process could be initiated and the same were cancelled by the Haryana Staff Selection Commission, Panchkula vide Public Notice dated 1.5.2015 & 27.04.2018. The candidates who had earlier applied against the above categories & whose details are available on web site of Haryana Staff Selection Commission i.e. www.hssc.gov.in will also be eligible against the re-advertised posts and such candidates will be exempted from the payment of application fee. However, such candidates will have to apply afresh alongwith proof of depositing the application fee. They are required to upload the fee Challan/credit certificate issued by Treasury/e-Challan as the case may be, alongwith the fresh application form and will produce the original Challan/credit certificate issued by Treasury /e-Challan at the time test/verification.

Note 1.	Where posts are reserved for PHC categories, 4% of vacancies shall be reserved horizontally for persons with disabilities suffering from (i) Blindness or low vision (ii) hearing impairment and (iii) Locomotor disability or cerebral palsy (iv) Person with Benchmark Disability and these Posts are included in total No. of Posts.
Note 2.	If the quota reserved for Ex-servicemen or Backward Classes remains unfilled due to non-availability of suitable Ex-servicemen or their dependents or non-availability of suitable candidates from Backward Classes then there will be 2% reservation for freedom fighter/their children/grand children to that extent.
Note 3.	Reservation in Scheduled Caste (SC), Backward Class (A) & Backward Class (B), Ex-serviceman (ESM) & Eligible Sports Persons (ESP) are only for domicile of Haryana State
Note 4.	As per Chief Secretary Letter No. 6/43/2018-1GS.I, dated 20.09.2018, there is no age relaxation for the Instructors working in Skill Development and Industrial Training Department, Haryana on contractual basis.
Note 5.	Detailed instructions for filling the online application form are available on the website of HARYANA STAFF SELECTION COMMISSION i.e www.hssc.gov.in. These must be gone through carefully before filling up the form. It is advised to download the filled up form take a printout go through the particulars carefully and then application be uploaded as no request for change of any particulars shall be entertained at any stage after uploading of form.
Note 6.	In case of any guidance/information/clarification regarding the online filling of the application form and Advertisement the candidate can call at helpline No. 0172-5143700 on all working days from 9:00 A.M. to 5:00 P.M.

Procedure/ Instructions for Online Filling Application Form:

Special Instruction:

The prescribed essential qualification does not entitle a candidate for selection. As per notification G.S.R.-10/const./Art. 309/2018, dated 13.02.2018 issued by General Administration Department, Haryana Government, the commission shall make selection and recommendation of the name of the candidates to a department or an office for Group C posts on the basis of written exam and there shall be no interview. The scheme of marks in respect of selection to Group C posts shall comprise of total 100 marks, which is detailed below:

1. Written exam: 90 marks
2. Socio-Economic criteria and experience: 10 marks (For details see notification G.S.R.-10/const./Art. 309/2018, dated 13.02.2018)

The written examination will be either on OMR Sheet based or online computer based (CBT). The decision of the Commission in all matters relating to acceptance or rejection of an application, eligibility/suitability of the candidates, mode of, and criteria for selection etc. will be final and binding on the candidates. No inquiry or correspondence will be entertained in this regard. HSSC reserve the right to increase or decrease the number of vacancies on administrative grounds. The candidates shall be bound by all the instructions issued from time to time.

General Instructions:

1. Please read the instructions and procedures carefully before you start filling the Online Application Form.
2. The candidate should fill all details while filling the Online Application Form.
3. After applying online, Registration No. and Password will be generated.
4. Take print out of the registration no. and password screen for future reference of your application status and for Reprinting of your online filled application form and e-Challan form.
5. After successful submission of application candidates can take print out of application form and e-Challan.
6. The hard copy of application form along with all uploaded documents must be brought at the time of verification/scrutiny.
7. Candidates are advised to fill their application form carefully such as Name, Fathers/Mothers name, Date of Birth and Category, Qualification, obtained

marks, passing year, photo & Signature, fee, etc. After final submission of application form, no change will be allowed. Candidate will be responsible for any mistake in the data of application form and fees paid by him/her. No correspondence will be entertained in this regard.

Relaxation in Age:

i) In the case of Scheduled Caste (SC), Backward Class (A) and Backward Class (B) the upper age limit is relaxable as per Haryana Govt. instructions. ii) For Ex-servicemen Candidates, relaxation up to continuous Military service added by three years is permissible.

iii) The upper age limit in respect of widow, legally separated woman, divorcee, deserted woman and unmarried woman will be upto 47 years as per Government instructions.

Reservation of posts:-Reservation will be as per Haryana Government Instructions.

Reservation for persons will be as per Haryana Govt. instructions contained in letter No. 22/10/2013-1GS-III, dated 15.07.2014.

For Disabled ESM/Dependent of Killed/ Disabled in action reservation will be as per

₆th

Haryana Govt. instructions contained in letter No. 945-GS-II 72/6451, dated the March, 1972.

The reservation for ESM will be utilized in the order given below:

i) Disabled ex-servicemen with disability between 20% to 50%. ii) Up to two dependents of Service personnel killed/disabled beyond 50% iii) Other ex-servicemen.

Note:-1. Disabled ex-servicemen will mean ex-servicemen who, while serving in the Armed Forces of the Union were disabled in operations against the enemy or in disturbed areas.

Note:-2. The dependents will include besides wife/widow, dependent sons/daughters.

The dependents of ESM who fulfill all conditions of qualifications, age etc. prescribed for posts will be considered on merit for the posts reserved for ESM to the extent of non-availability of suitable ESM candidates .

DESM candidates of Haryana claiming benefit must have valid eligibility certificate on last date of submission of online application form and will have to produce the valid Eligibility Certificate from the concerned Zila Sainik Board at the time of scrutiny. Mere dependent certificate will not be entertained. ESM candidates should also produce attested photo copy of Identity Card issued by concerned Zila Sainik Board & Discharge Book at the time of scrutiny.

NONE OF THE PERSON BELOW SHALL FALL WITHIN THE DEFINITION OF WORD

DEPENDENT OF EX-SERVICEMEN IN TERMS OF HARYANA GOVT. LETTER NO.

12/37/79-GSII, DATED 21-11-1980 :

(i)

A person may be working on an adhoc basis against the post advertised or somewhere else.

(ii)

A person may be unemployed at the time of making the application but he may have other source of income viz. from agriculture, trade, property, Bank Balance etc.

(iii) A person who is a member of the joint Hindu family and remains dependent upon the Karta till there is partition in the family or he ceases to be a member of the joint Hindu family and is obliged to pass on all his income to the Karta and he draws money for his subsistence from the pool of the joint Hindu family with the consent of the Karta.

(iv) A candidate who is a member of the joint Hindu family is employed on adhoc basis but he is otherwise dependent on his father.

Note :-i) The benefit of reservation will be given only to those SC/BCA/BCB and ESM and Eligible sportsperson candidates who are domicile of Haryana State. The SC/BCA/BCB candidates are required to submit SC/BCA/BCB Certificate duly issued by the competent authority at the time of scrutiny. Likewise the Eligible Sports Person shall be required to produce the Sports Gradation Certificate as per Government instructions duly issued by the competent authority. DESM shall be required to produce the Valid Eligibility Certificate duly issued by the respective Zila Sainik Board at the time of scrutiny.

ii) Qualification and other term and conditions of eligibility will be determined with regard to the last date fixed for receipt of online applications.

iii) Candidates applying for a post must ensure that they fulfill all the eligibility conditions on the last date of application. If on verification at any time before or after the written examination or scrutiny or appointment, it is found that they do not fulfill any of the eligibility condition or it is found that the information furnished is false or incorrect their candidature will be cancelled.

A candidate whether he belongs to General or reserved category viz. SC, BCA, BCB, ESM/DESM, DFF or ESP can submit only one online application form for a particular category of post advertised. The special instructions for online applications as given on website www.hssc.gov.in must be carefully read to help in understanding and filling in the application form. No offline form will be accepted. All the relevant columns of the application form should be filled in.

Printed Copy: Printed copy of the application form with original certificates and photocopy of self attested certificates must be brought by the candidate at the time of scrutiny /verification alongwith Photo, Identity Proof i.e. Identity Card/Driving License/Passport/Voter Card/Pan Card/Aadhar Card etc.

Action against candidates found guilty of misconduct :-

Candidates are warned that they should not furnish any particulars that are false, tampered/fabricated or should not suppress any material information while filling up the application form.

At the time of written examination/scrutiny, if a candidate is (or has been) found guilty of : (i) using unfair means during the examination or (ii) impersonating or procuring impersonation by any person or (iii) misbehaving in the examination hall or taking away the question booklet or any part thereof/answer sheet from the examination hall or (iv) resorting to any irregular of improper means in connection with his/her candidature for selection or (v) obtaining support for his/her candidature by any unfair means. (vi) Not complying with instructions issued from time to time, such a candidate may, in addition to rendering himself/herself liable to criminal prosecution, be liable :

(a)

to be disqualified from the examination/scrutiny for which he/she is a candidate.

(b)

to be debarred either permanently or for a specified period, from any examination or recruitment conducted by HSSC.

(c)

for termination of service, if he/she already in Govt. Service.

Note:-HSSC reserves the rights to supervise the complete recruitment process from online application to selection by way of using Biometric process and CCTV Cameras/ Videography etc.

Fake Institutions:-

Candidates, who have obtained degrees or diplomas or certificates for various courses from any institution declared fake by the University Grants Commission or not recognized by Haryana Government shall not be eligible for being considered for recruitment to the posts advertised and no representation in this regard shall be entertained.

Serving Government Employees:-

Serving Government Employees have to produce no objection certificate as obtained by him before cutoff date from their Head of department at the time of verification/scrutiny.

DOCUMENTS TO BE UPLOADED WITH APPLICATION FORM

i)	Scanned Copy of Essential Qualifications i.e. Matric showing Date of Birth and
	mark sheet of 10+2/Graduation/Diploma/Degree etc.
ii)	Scanned Copy of Sport Gradation Certificate in	case		of Eligible Sports Persons,
	duly issued by the Competent Authority.
iii)	Scanned Copy of Haryana Domicile Certificate in		case		of	BCA/BCB/SC/ESM/
	DESM/DFF and women issued by competent authority.
iv)	Copy of Challan/credit certificate issued by Treasury/e-Challan as the case may
	be, in case of candidates who have applied earlier.
v)	Scanned Photographs duly signed by the Candidate.
vi)	Scanned signatures of the Candidate.

DOCUMENTS TO BE BROUGHT AT THE TIME OF SCRUTINY/SELECTION.

i) All original certificates/documents/testimonials of educational qualifications and other documents mentioned in the online applications and one set of self attested copies of all these certificates.

ii) Printed Copy of online application form alongwith latest stamp size photograph duly attested by a gazetted officer and pasted on the application form alongwith date on photograph.

iii) Original proof of earlier fee deposited i.e. Treasury Challan / Credit Certificate issued by concerned treasury etc.

LIKELY CAUSES OF REJECTION OF APPLICATION: -

The following are likely causes of rejection:

More than one application form for a particular category.

Application is incomplete and not online.

Full fee, if not deposited in the manner prescribed.

No qualification of Hindi/Sanskrit as prescribed in advertisement.

Applicant does not possess the requisite academic qualification on cutoff date.

Applicant does not indicate visible identification mark in appropriate column of application form.

Candidate is underage/overage on the cutoff date/closing date.

Variation in data of online application form and in original documents when brought for verification/scrutiny.

Lack of essential qualification as prescribed in advertisement.

USE OF MOBILE PHONE AND OTHER ELECTRONICS DEVICE IN HARYANA STAFF SELECTION COMMISSION EXAMINATION/ SCURTINY OF DOCUMENTS IS STRICTLY PROHIBITED.

-sd-
Place :	Panchkula	Secretary,
Dated:	27th December, 2018	Haryana Staff Selection Commission,
		Panchkula.