TAMIL NADU PUBLIC SERVICE COMMISSION Advertisement No.509 Notification No.22/2018 DATED:28.09.2018

Applications are invited only through online mode up to 28.10.2018 for direct recruitment to the vacancies in the following posts.

Individual communication regarding the date and time of Certificate Verification, Oral Test and Counselling will not be sent to the Candidates, the above details will be made available in the Commissions Website. Candidates will be informed of the above fact only through SMS and e-mail.

Name of the Post and Post Code	Name of the Service and Service Code.	No. of vacancies	Scale of Pay
Technical Assistant (Air Conditioning) (1769)	Tamil Nadu Forensic Science Subordinate Service (033)	1 GT(G)	(Level 10) Rs.20,600-65,500/-
Technical Assistant (Gas Plant) (1770)		1 GT(G)

Abbreviation : GT- General Turn ; G - General

The number of vacancies is only approximate and is liable for modification including reduction with reference to vacancy position at any time before finalisation of selection.

It is mandatory for the applicants to register their basic particulars through One-Time online Registration system on payment of Rs.150/- (Rupees One Hundred and Fifty only) towards registration fee and then should apply online for this recruitment. [The One-Time Registration will be valid for 5 years from the date of registration. Thereafter, the registration should be renewed by paying the prescribed fee.]

2. DISTRIBUTION OF VACANCIES

The rule of reservation of appointment is not applicable for this recruitment since the cadre strength of both these posts is one.

3. IMPORTANT DATES AND TIME

Date of Notification	28.09.2018
Last date for submission of online application	28.10.2018
Last date for payment of Examination Fee through Bank (State Bank of India or Indian Bank)	30.10.2018
Date of Written Examination
Paper I (Subject Paper) (Diploma Standard)	05.01.2019 FN	10.00 A.M. to 01.00 P.M
Paper II (General Studies) (Diploma Standard)	05.01.2019 AN	02.30 P.M. to 04.30 P.M

4. FEES

EXAMINATION FEE CONCESSION

a)	Registration Fee For One-Time Registration (Revised with effect from 01.03.2017 vide G.O.(Ms).No.32, Personnel and Administrative Reforms (M) Department, dated 01.03.2017) Note Those who have registered in the One -Time Registration system and paid the Registration fee of Rs.150/- and received the Registration ID need not pay the Registration fee i.e., Rs.150/- and it is enough to pay the Examination fee alone.	Rs.150/-
b)	Examination Fee Note The Examination fee should be paid at the time of submitting the online application for this recruitment if they are not eligible for the fee concession noted below.	Rs.150/-

Category	Concession	Condition
(i) Scheduled Castes / Scheduled Caste (Arunthathiyars), Scheduled Tribes	Full Exemption	--
(ii) Differently Abled Persons, Destitute Widows of all communities	Full Exemption	(i) For Differently Abled Persons, the disability should be not less than 40%. (ii) For DWs, the DW certificate should have been obtained from the RDO / Sub Collector/ Assistant Collector
(iii) Most Backward Classes / Denotified Communities, Backward Classes (Other than Muslims), Backward Classes (Muslims)	Those who have not availed three free chances so far in the previous recruitments may avail exemption from payment of Examination fee.	Should not have availed three free chances in the previous recruitments.
(iv) Ex-Servicemen	Those who have not availed two free chances so far in the previous recruitments may avail exemption from payment of Examination fee.	(i) Should not have availed two free chances in the previous recruitments. (ii) Fee concession will not apply for those Ex-Servicemen who have already been recruited to any class or service or category.

Note :

(i) The three / two free chances allowed are not for EACH POST but for ANY THREE / TWO APPLICATIONS ONLY. The claim for exemption from payment of Examination fee made in any application which is rejected / admitted or withdrawn will be counted as a free chance availed.

(ii) Failure to pay the prescribed fee along with the application in-time, will result in the rejection of application.

(iii) The number of free chances availed by the applicant means, the total number of free chances hitherto availed by the applicant in his/her earlier applications submitted to the Commission for any post / recruitment.

(iv) If the Examination fee concession claimed in the application is found to exceed the admissible limits, as announced above, the application will be rejected at any stage of selection. The number of free chances availed by the applicants will be counted from all the previous applications submitted through One Time Registration and / or submitted directly without One Time Registration.

[For further details regarding Examination Fee concession, refer to para. 12 of

the Instructions to Applicants ]. 5. MODE OF PAYMENT OF EXAMINATION FEE

Examination fee of Rs.150/- (Rupees One Hundred and Fifty only) is payable online through Net banking / Credit card / Debit card or it can be paid offline at SBI / Indian Bank within 2 days from the date of submission of online application, by choosing the option in the online application.

Applicants have to register their basic particulars through One-Time Registration which is mandatory on payment of Rs.150/- (Rupees One Hundred and Fifty only) towards registration fee and then should apply online for this recruitment. The One-Time Registration will be valid for 5 years from the date of registration. Thereafter, the registration should be renewed by paying the prescribed fee. Applicants who have already registered in One-Time Registration system by paying Rs.50/- before 01.03.2017 and having validity and those who have registered for One-Time Registration on or after 01.03.2017 by paying Rs.150/- towards One-Time Registration are exempted from paying the registration fee for this recruitment.

Applicants have also to pay the service charges applicable to the State Bank of India / Indian Bank.

Applicants can avail exemption from paying Examination fees as per eligibility criteria.

Offline mode of payment in the form of Demand Draft / Postal Order etc., will not be accepted and the applications forwarded with such modes of payment will be summarily rejected.

[For further details refer para 2 (13-23) of Instructions to Applicants ]

6. QUALIFICATIONS (A) AGE LIMIT (As on 01.07.2018)

Category of Applicants	Maximum Age
SCs, SC(A)s, STs, MBCs/DCs, BCs, BCMs and Destitute Widows of all castes	No maximum age limit
Others [i.e., Applicants not belonging to SCs, SC(A)s, STs, MBCs/DCs, BCs and BCMs]	30 years (should not have completed)

Note Applicants not belonging to SCs, SC(A)s, STs, MBCs/DCs, BC(OBCM)s, BCMs who have put in five years and more of service in the State / Central Government are not eligible to apply even if they are within the age limit. Explanation: - No maximum age limit shall mean that the applicants should not have completed 58 years of age either on the date of Notification or at the time of selection/ appointment to the post.

[For further details regarding Age limit refer para 5 of Instructions to Applicants and Section 3(r) of Tamil Nadu Government Servants (Conditions of Service) Act, 2016 ] Age Concession

SCs, SC(A)s, STs, MBCs/DCs, BCs, BCMs	Others i.e. Applicants not belonging to SCs, SC(A)s, STs, MBCs/DCs, BCs, BCMs
Differently Abled Persons	Ex-Servicemen	Differently Abled Persons	Ex-Servicemen
No maximum age limit	40 years	48 years

Note (i) The above mentioned age concession will not apply to those Ex-Servicemen applicants who had already been recruited to any class or service or category.

(ii) Instructions given with regard to maximum age limit under para 5 of the Instructions to

Applicants will apply to this recruitment.

(B) EDUCATIONAL QUALIFICATION AND EXPERIENCE (As on 28.09.2018) Applicants should possess the following or its equivalent qualification as on 28.09.2018 i.e. date of this Notification.

Name of the Post	Educational Qualification	Experience
Technical Assistant (Air Conditioning)	A Diploma in Mechanical Engineering awarded by the Department of Technical Education of the Government of Tamil Nadu with Refrigeration and Air-conditioning as an Elective subject.	Experience for a period of not less than two years in the maintenance of Air-conditioning and Cold Storage Plant in a reputed firm or a Government Institution.
Technical Assistant (Gas Plant)	A Diploma in Mechanical Engineering awarded by Department of Technical Education of the Government of Tamil Nadu.	Experience for a period of not less than two years in the maintenance of Fuel Gas Plant, in a reputed firm or a Government Institution.

Note

i. The Diploma qualification prescribed for this post should have been obtained by passing S.S.L.C/H.S.C from the recognised Institutions as required under Section 25 of Tamil Nadu Government Servants (Conditions of Service) Act, 2016.

(Results of the Examination should have been declared on or before the date of Notification)

ii. Applicants claiming Equivalence of qualification to the prescribed qualification should submit evidence for Equivalence of qualification in the form of Government Order issued on or before the date of this Notification, failing which their application will be summarily rejected. The Government Orders issued declaring equivalence of prescribed qualification after the date of this notification will not be accepted under Section 25(b) of Tamil Nadu Government Servants (Conditions of Service) Act, 2016. A list of Equivalence of qualification in the related subject is available in Annexure - I to this Notification.( Refer also to the Disclaimer annexed to this Notification)

[For further details regarding Equivalence of Qualification refer para 10 of the Instructions to Applicants ] (C) CERTIFICATE OF PHYSICAL FITNESS Applicants selected for appointment to this post will be required to produce a Certificate of Physical Fitness in the form prescribed below before their appointment.

Standard of Vision	Form of Certificate of Physical Fitness
Standard III or Better (Colour Blindness or Night Blindness is considered as disqualification for recruitment to this post)	Form prescribed for Other than Executive and Ministerial posts

(D) KNOWLEDGE IN TAMIL Applicants should possess adequate knowledge in Tamil on the date of this Notification.

[For details refer para 11 of the Commissions Instructions to Applicants ] 7. CONCESSIONS

(i) Concessions in the matter of Age and Fees allowed to SCs, SC(A)s, STs, MBCs/DCs, BCs,BCMs, Destitute Widows, Differently Abled Persons, Ex-Servicemen, other categories of persons are given in paras. 12 to 14 of the Instructions to Applicants .

(ii) Persons claiming concessions referred to above and other claims made in the application, have to produce evidence for such claims when called for by the Tamil Nadu Public Service Commission, otherwise their application will be liable for rejection.

Note

In all cases, an Ex-Serviceman once recruited to a post in any class or service or category, cannot claim the concession of being called an Ex-Serviceman for his further recruitment. [Proviso to Section 3(j)(vii) of Tamil Nadu Government Servants (Conditions of Service) Act, 2016 ] 8. SCHEME OF EXAMINATION: OBJECTIVE TYPE (OMR METHOD) AND ORAL TEST:-

Note

Subject	Duration	Maximum Marks	Minimum Qualifying Marks for selection
SCs, SC(A)s, STs, MBCs/DCs, BCs and BCMs	Others
i. Paper- I (Subject Paper) (Objective Type) (200 Questions) Mechanical Engineering (Diploma Standard) (Code No.255) ii. Paper - II (General Studies) (Objective Type) (100 Questions) General Studies (Diploma Standard) - 75 Questions and Aptitude and Mental Ability (SSLC Standard) - 25 Questions iii. Interview and Records	3 hours 2 hours ---	300 200 70	171	228
	Total	570

(i) The Syllabi for Examination is furnished in the Annexure III of the Notification and also available in the Commissions website www.tnpsc.gov.in

(ii) The questions in Paper - I will be set in English only and questions in Paper - II will be set both in English and Tamil.

9. EXAMINATION CENTRES Examination will be held at the following centres: -

Name of the Centre	Centre Code
Chennai	0100
Madurai	1000
Coimbatore	0200

Note

(i) Request for change of Examination Centre / Venue will not be entertained.

(ii) Applicants will be required to appear for the Written Examination / Certificate Verification / Oral Test at their own expenses.

(iii) The Commission reserves the right to increase / decrease the number of Examination Centres and to re-allot the applicants with respect to the number of candidates opted for each centre.

10. SELECTION PROCEDURE Selection will be made in two successive stages i.e., (i) Written Examination and (ii) Oral Test in the form of an interview. Final selection will be made on the basis of total marks obtained by the applicants in the Written Examination and Oral Test taken together subject to the rule of reservation of appointment. Applicants appearance in both the papers of the Written Examination and in the Oral Test is compulsory. An applicant who has not appeared in any one of the papers in Written Examination or Oral Test will not be considered for selection, even if he/she secures qualifying marks in the Written Examination or Oral Test. Based on the marks obtained by the applicants in the Written Examination, the tentative list of eligible applicants for Certificate Verification will be announced in the Commissions website. After verification of the original certificates, the eligible applicants will be summoned for Oral Test following the rule of reservation of appointment.

[For further details refer paragraph 23 (b) of Instructions to Applicants ] 11. NO OBJECTION CERTIFICATE / INFORMATION TO THE EMPLOYER

No Objection Certificate obtained from appropriate authority shall be produced at the time of Certificate Verification/ Counselling. No Objection Certificate should be produced in the format prescribed under para 15 (g) of Commissions Instructions to Applicants . Any violation of this instruction will be liable for rejection of application and forfeiture of his/her Candidature. 12. GENERAL INFORMATION

A. The rule of reservation of appointment is not applicable to this recruitment since the cadre strength of these posts is one.

B. The number of vacancies advertised is only approximate and is liable for modification / reduction with reference to vacancy position, at any time before finalization of selection.

C. The selection for appointment to this post is purely provisional subject to final orders pending on the Writ Petitions, if any, filed before the Honble Madras High Court and Madurai Bench of Madras High Court.

D. Reservation of appointment to Destitute Widows, Ex-Servicemen and Differently Abled Persons will not apply to this recruitment.

E. The Differently Abled Persons who apply under other eligible category should submit / upload a copy of Differently Abled Certificate from the competent authority specifying the nature of physical handicap and the degree of disability as per para 14(b) of Instructions to Applicants for their claim, when called for by the Tamil Nadu Public Service Commission.

F. Evidence for claims made in the online application should be uploaded / submitted within stipulated time when the documents are called for by the Tamil Nadu Public Service Commission. Any subsequent claim made thereafter on submission of online application will not be entertained. Failure to submit the documents within the stipulated time limit will entail rejection of the application.

G. Correct and True information regarding arrest, convictions / debarment / disqualification by any recruiting agency, criminal or any disciplinary proceedings initiated / pending or finalized, participation in agitation or any Political Organization, candidature in election for Parliament/State Legislature/Local Bodies etc., if any, should also be furnished to the Commission at the time of submission of online application i.e., the details thereof, originals of the Judgement, order or G.O dropping further action in Departmental proceedings or any document that may prove the suitability of such applicants for a Government appointment in such cases must be produced at the stage / time of Certificate Verification without fail. All such events that occur after the submission of application and till the date of his / her selection and appointment shall be reported to the Commission forthwith then and there. Failure to report on the part of applicant will be considered as suppression of material information and will attract suitable penal action.

H. Incomplete applications and applications containing wrong claims or incorrect particulars relating to category of reservation / age / communal category / educational qualification / PSTM / physical qualification and other basic eligibility criteria will be liable for rejection.

I. One-Time Registration is not an application for any Post / Recruitment. Though the details/particulars were furnished in the One-Time Registration by the applicants, the details/particulars furnished in the online application submitted for this recruitment alone will be taken into consideration. Tamil Nadu Public Service Commission will not be responsible for any consequences arising out of furnishing of incorrect and incomplete details in the application or omission to provide the required details in the application for this recruitment.

13. OTHER IMPORTANT INSTRUCTIONS

a) Applicants should ensure their eligibility for Examination: The applicants applying for the Examination should go through all instructions carefully and ensure that they fulfil all eligibility conditions for admission to Examination. Their admission to all stages of the Examination will be purely provisional subject to satisfaction of the eligibility conditions. Mere issue of memo of admission to the applicant will not imply that his/her Candidature has been fully cleared by the Commission.

b) The Hall Tickets for eligible applicants will be made available in the Commissions website http://www.tnpsc.gov.in or www.tnpscexams.net or www.tnpscexams.in for downloading the same by applicants. Hall Tickets will not be sent by post. Hence, the applicants should watch Commissions website before the scheduled date of Examination. The applicants must comply with each and every instruction given in the Hall Ticket.

c) Grievance Redressal Cell for guidance of applicants: In case of any guidance/ information / clarification of their applications, candidature etc., applicants can contact Tamil Nadu Public Service Commissions Office in person or over Telephone No.044-25332833 / 25332855 or the Commissions Office Toll-Free No.1800 425 1002 on all working days between 10.00 a.m. and 05.45 p.m or Commissions e-mail id contacttnpsc@gmail.com .

d) After Notification, during the process of recruitment till publication of result, no information, under Right to Information Act, would be furnished.

e) Mobile Phones and other articles Banned:

i. Except the permitted writing material (i.e. pen), applicants are not allowed to bring cellular phones, electronic or any other type of calculators, watches and rings with inbuilt memory notes, recording devices either as a separate piece or part of something used by the applicant such as watch or ring etc or any other electronic devices and non - electronic devices such as P&G design data book, mathematical and drawing instruments, log tables, stencils of maps, slide rules, books, notes, loose sheets, rough sheets, hand bags etc., into the Examination Hall / Room.

ii. If they are found to be in possession of any such thing or instrument, they will not be allowed to write the Examination further, besides invalidation of answer paper and / or debarment. If it is considered necessary they will be subjected to thorough physical search including frisking on the spot. (For further details refer Instructions to Applicants ).

iii. Applicants are advised in their own interest not to bring any of the banned items including Mobile Phones to the Venue of the Examination, as arrangements for safekeeping cannot be assured.

f) Unless specific instruction is given, applicants are not required to submit along with their application any certificates (in support of their claims regarding age, educational qualifications, physical qualification, community, physical disability etc.,) which should be submitted when called for by the Commission. Applicants applying for the Examination should ensure that they fulfil all the eligibility conditions for admission to the Examination. Their admission at all the stages of Examination for which they are admitted by the Commission will be purely provisional, subject to their satisfying the prescribed eligibility conditions. If, on verification at any time before or after the Written Examination / Certificate Verification / Oral Test, it is found that they do not fulfil any of the eligibility conditions, their Candidature for the Examination will be liable for rejection / cancellation by the Commission. (For further details refer to the Instructions to Applicants )

g) If any of their claims is found to be incorrect, it will lead to rejection of their Candidature and suitable penal action including debarment

h) UNFAIR MEANS STRICTLY PROHIBITED: No applicant shall copy from the papers of any other applicant or permit his/her papers to be copied or give or attempt to give or obtain or attempt to obtain irregular assistance of any description. [For further details refer Instructions to Applicants ].

i) CONDUCT IN EXAMINATION HALL: No applicant should misbehave in any manner or create a disorderly scene in the Examination Hall or harass the staff employed by the Commission for the conduct of the Examination. Any such misconduct will be severely viewed and penalised. [For further details refer Instructions to Applicants ].

j) For violation of Instructions to Applicants in any manner, suitable penalty will be imposed as per the Instructions to Applicants or as deemed fit by the Commission.

14. HOW TO APPLY

(i) Applicants should apply only through online mode in the Commissions Website

http://www.tnpsc.gov.in , http://www.tnpscexams.net , http://www.tnpscexams.in

(ii) One-Time Registration (OTR) and Applicants Dashboard are mandatory before applying for any post. Applicant should register only once in the One-Time Registration by paying Rs.150/- as Registration fee. Successfully registered One-Time Registration is valid for 5 years from the date of registration. All the applications should be submitted using the One-Time Registration ID and password registered by the applicant.

(iii) To apply under One-Time Registration, applicants should have scanned image of their photograph, certificate specified, if any and signature in CD/DVD/Pen Drive to upload the same, as per the specifications given in the guidelines for scanning and uploading of photograph and signature.

(iv) Applicants who have already registered in One-Time Registration on or before 29.09.2015 shall use their existing user ID and Password to create applicant Dashboard in the new One-Time Registration system. No applicant is permitted to create more than one registration ID in One-Time Registration.

(v) Applicants should enter the Unique ID and password to view the already available information and update them.

(vi) One-Time Registration is not an application for any post. It is just a collection of information from the applicants and giving a separate dashboard to each applicant to facilitate them to maintain their own profile. Applicant who wishes to apply for any post shall click Apply against the post notified in the Commissions Website and use the same USER ID and PASSWORD given for ONE-TIME REGISTRATION.

(vii) Applicants should select the name of the post(s) and service to which they wish to apply.

(viii) An online application uploaded without the photograph, specified documents and signature

will be rejected.

(ix) All the particulars mentioned in the online application including Name of the Candidate, Post applied, Educational qualifications, Communal category, Date of Birth, Address, e-mail ID, Centre of Examination etc. will be considered as final and no modifications will be allowed after the last date specified for applying online. Since certain fields are firm and fixed and cannot be edited, applicants are requested to fill in the online application form with utmost care and caution as no correspondence regarding change of details will be entertained.

(x) PRINT OPTION

a) After submitting the online application, applicants can print / save their Application in PDF format. b) On entering user ID and password, applicants can download their application and print the same if required. c) Applicants need not send the printout of the online application or any other supporting documents to the Commission. The application and certificates will be verified only when the applicants come up for Certificate Verification.

(xi) One-Time Registration will not be considered as an application for any post.

15. UPLOAD / SUBMISSION OF DOCUMENTS Applicants should upload/submit the Experience Certificate referred to the said posts in paragraph 6(B) of the Notification in the format provided in Annexure II when called for by the Tamil Nadu Public Service Commission. If, the required certificate is not uploaded or submitted by the applicant when called for by the Commission his/her application will not be considered for the above said posts.

16. LAST DATE FOR SUBMITTING ONLINE APPLICATION The online application can be submitted up to 28.10.2018 till 11.59 p.m., after which the link will be disabled.

[For detailed information, applicants may refer Commissions Instructions to Applicants in the Commissions website www.tnpsc.gov.in ] Warning

All the Recruitments by Tamil Nadu Public Service Commission are purely merit based.

Tamil Nadu Public Service Commission hereby cautions the candidates against touts and agents cheating by making false promises of securing job through unfair means.

Tamil Nadu Public Service Commission shall not be responsible or liable for any loss that may be caused to any candidate on account of indulging into any sort of actions with such unscrupulous persons.

vr;rhpf;if

njh;thizaj;jpd; bjhpt[fs; midj;Jk; tpz;zg;gjhuu;fspd; ju thpirg;gona nkw;bfhs;sg;gLfpd;wd/

bgha;ahd thf;FWjpfis brhy;yp. jtwhd tHpapy; ntiy th;fp jUtjhf TWk; ,ilj;jufu;fsplk; tpz;zg;gjhuu;fs; kpft[k; ftdkhf ,Uf;FkhW vr;rhpf;fg;gLfpwhh;fs;/

,Jnghd;w jtwhd kw;Wk; neh;ikaw;w egh;fshy; tpz;zg;gjhuu;fSf;F Vw;gLk; ve;jbthU ,Hg;g[f;Fk; njh;thizak; ve;jtpjj;jpYk; bghWg;gy;y/

Secretary

DISCLAIMER

The Government Orders relating to Equivalence of Qualification are available in the Tamil Nadu Public Service Commissions website. However, the applicants while applying for the Examination should furnish the details of Equivalence of Qualification declared in the form of Government Orders issued on or before the date of this Notification if any, which are not mentioned in Annexure - I to the Notification and produce the same while submitting the documents, failing which their Application will be rejected. The Government Orders issued regarding equivalence of prescribed qualification after the date of this Notification will not be accepted.

Secretary

ANNEXURE-I The following qualifications are declared as Equivalent.

Sl.No	Qualification	G.O. in which ordered
1.	Diploma in Mechanical and Rural Engineering awarded by State Board of Technical Education is equivalent to Diploma in Mechanical Engineering.	G.O.(Ms).No.22, Higher Education (B1) Department, dated 12.01.2017.
2.	The following trades conducted by Indian Air Force is recognised as equivalent to Diplomas in Mechanical Engineering awarded by State Board of Technical Education and Training for appointment to the posts in the State Government which require Diploma in Mechanical Engineering, subject to the weightage of 15 years of service in the three services viz. Army, Navy, Air Force. 1. Engine Fitter 2. Mechanical Transport Fitter 3. Fitter Armourer 4. Mechanical Tool Setter and Operator	G.O.(Ms).No.418, Personnel and Administrative Reforms (PER.R) Department, dated 26.09.1990
3.	The course in Part I and Part II of Technician Engineers (Mechanical) Examination awarded by the Institution of Mechanical Engineers (India), is treated as equivalent to Diploma in Mechanical Engineering awarded by the State Board of Technical Education and Training, Tamil Nadu.	G.O.(Ms).No.51, Personnel and Administrative Reforms (R) Department, dated 31.01.1996

ANNEXURE-II FORMAT OF EXPERIENCE CERTIFICATE

1.	Name and Address of the Institution / Organisation	:
2.	Whether the said Institution / Organisation is a recognized one?	:
3.	Registration Number of Institution / Organisation if any	:
4.	Name of the Employee and Date of Birth	:
5.	Qualification possessed by the Employee on the Date of Joining Service in the above said Institution / Organisation	:
6.	Designation and period of Experience of the Employee	:
7.	Nature of the Work/Duty performed by the Employee (To be mentioned in brief)	:
8.	Whether the Employee possesses experience as laid in para 6(B) of the Notification for the Post of (relevant post may mentioned)	:	Yes / No
9.	Whether Attendance Register / Attendance Rolls / Pay Register and other records /available for this Employee	:	Yes / No
10.	Certificate from the Institution / Organisation	:	The above said employee having experience in this Institution / Organisation as stated above. The above particulars furnished by us are correct

Office Seal: Date: Place: Signature. Name and Designation of the issuing Authority. Note: Institution / Organisation which issues the certificate is cautioned that issuing of any certificate containing false details will lead to legal / penal action on them.

ANNEXURE-III SYLLABUS PAPER-I (Objective Type) MECHANICAL ENGINEERING (DIPLOMA STANDARD) CODE NO: 255 UNIT I: INDUSTRIAL MANAGEMENT X and Y theories of Management, Contributions of Henry Fayol and F.W. Taylor for Management - job evaluation by Ranking method and factor comparison method - motivating techniques - fixing selling price of a product - break even analysis for make or buy decision - sinking fund method and straight line method of calculating depreciation - ABC analysis determination of economic order quantity TQM ISO standards - certification UNIT II: INDUSTRIAL ENGINEERING Factors influencing plant location - principles of layout - techniques used to improve layout - primary and secondary causes of an accident - personal protective devices - method study procedure - flow diagram, string diagram and two handed process chart - principles of motion economy-procedure for conducting stopwatch time study, production study and ratio delay study - objectives of preplanning, routing, scheduling, despatching and controlling - difference between inspection and quality control - types of plant maintenance - TPM UNIT III: PRODUCTION TECHNOLOGY Foundry - patterns - special casting techniques - welding - hot and cold working drawing, rolling and forging - powder metallurgy - plastics - rubber - ceramics - refractories - lathe work - planner - shaper - slotter - drilling machine - milling machines - grinding machines - broaching - boring and jig boring - - Gears manufacturing practice - Heat treatment and metal finishing - press work UNIT IV: ELECTRICAL AND ELECTRONICS ENGINEEERING Units, Ohms law, Kirchoffs law, Faradays law - D.C. Circuits, batteries - electro magnetism - single phase and three phase A.C. circuits - Induction motors Electronics diodes resisitors capacitors transistors logic gates. UNIT V: MECHANICS OF MATERIALS Mechanical properties of metals - simple stresses and strains modulus of elasticity - geometrical properties of sections - thin cylinders bending moment and shear force - theory of simple bending - torsion and springs - transmission of motion gear drives and belt drives. UNIT VI: HEAT POWER ENGINEERING Working principle and comparison of otto and diesel cycles - construction and working of two stroke and four stroke engines - Heat balance test on I.C. engine - working principle of single and multistage compressors - Comparison of reciprocating and rotary compressors - classification of steam boilers - construction and working of steam turbines - working principle of steam power plant - Main elements of a nuclear power plant - Vapour compression cycle - factors affecting human comfort - working principle of a window air conditioner and central air conditioning system.

UNIT VII: COMPUTER APPLICATIONS Working principle and constructional details of computer - classification of computer Input / Output devices - flow charting MS Office & Star Office creating documents presentations sending emails. UNIT VIII: FLUID MECHANICS AND MACHINERY Working of differential manometer - use of venturimeter and orifice classification of mouth pieces meter - working of pelton wheel, francis turbine and kaplan turbine - construction and working principle of reciprocating pump, centrifugal pump and gear pump - quick return mechanism of shaping machine - table movement in a milling machine. UNIT IX: COMPUTER INTEGRATED MANUFACTURING CAD Definition geometric modeling wireframe, surface and solid modeling graphic standards GKS, IGES, PHIGS and DXF. CAM definition group technology part families parts classification and coding CAPP types. CNC definition components of CNC ATC CNC EDM. Part program format coordinate system types of motion control types of interpolation G and M codes sub program canned cycles. UNIT X: DESIGN OF MACHINE ELEMENTS Factors affecting selection of material classification of bearings sliding contact and rolling contact bearings radial and thrust bearings limits fits tolerance classification of fits cams and followers types.

PAPER- II (Objective Type) GENERAL STUDIES (DIPLOMA STANDARD) UnitI GENERAL SCIENCE Physics - Nature of UniverseGeneral Scientific lawsInventions and discoveriesNational scientific laboratoriesMechanics and properties of matterPhysical quantities, standards and unitsForce, motion and energyMagnetism, electricity and electronics Heat, light and sound. Chemistry Elements and CompoundsAcids, bases and saltsFertilizers, pesticides, Insecticides. BotanyMain Concepts of life scienceClassification of living organismNutrition and dieteticsRespiration. ZoologyBlood and blood circulationReproductive systemEnvironment, ecology, health and hygieneHuman diseases, prevention and remediesAnimals, plants and human life. Unit II. CURRENT EVENTS History Latest diary of eventsnational National symbolsProfile of StatesEminent persons & places in newsSports & gamesBooks & authors Awards & honorsIndia and its neighbours. Political ScienceProblems in conduct of public electionsPolitical parties and political system in IndiaPublic awareness & General administrationWelfare oriented govt. schemes, their utility. GeographyGeographical landmarks. Economics :Current socioeconomic problems. Science: Latest inventions on science & technology. Unit III. GEOGRAPHY Earth and UniverseSolar systemMonsoon, rainfall, weather & climateWater resources rivers in IndiaSoil, minerals & natural resourcesForest & wildlifeAgricultural patternTransport & communicationSocial geography populationdensity and distributionNatural calamities Disaster Management. Unit-IV. HISTORY AND CULTURE OF INDIA AND TAMIL NADU Indus valley civilizationGuptas, Delhi Sultans, Mughals and MarathasAge of Vijayanagaram and the bahmanisSouth Indian historyCulture and Heritage of Tamil peopleIndia since independenceCharacteristics of Indian cultureUnity in diversity race, colour, language, customIndiaas secular stateGrowth of rationalist, Dravidian movement in TNPolitical parties and populist schemes. UnitV. INDIAN POLITY

Constitution of IndiaPreamble to the constitution Salient features of constitution Union, state and territory Citizenshiprights amend duties Fundamental rights Fundamental duties Human rights charter Union legislature Parliament. State executive. State Legislature assembly Local government panchayat raj Tamil Nadu Judiciary in India Rule of law/Due process of law. Elections. Official language and ScheduleVIII. Corruption in public life. Anticorruption

measures CVC, lokadalats, Ombudsman, CAG Right to information Empowerment of women Consumer protection forums. UnitVI. INDIAN ECONOMY Nature of Indian economy Fiveyear plan modelsan assessmentLand reforms & agricultureApplication of science in agricultureIndustrial growthRural welfare oriented programmersSocial sector problems population, education, health, employment, povertyEconomic trends in Tamil Nadu. UnitVII. INDIAN NATIONAL MOVEMENTNational renaissanceEmergence of national leadersGandhi, Nehru, TagoreDifferent modes of agitationsRole of Tamil Nadu in freedom struggle Rajaji, VOC, Periyar , Bharathiar & others. Unit-VIII - APTITUDE & MENTAL ABILITY TESTS (SSLC STANDARD) Conversion of information to dataCollection, compilation and presentation of data Tables, graphs, diagramsParametric representation of dataAnalytical interpretation of data SimplificationPercentageHighest Common Factor (HCF)Lowest Common Multiple (LCM)Ratio and ProportionSimple interest Compound interestAreaVolumeTime and Work Logical ReasoningPuzzles DiceVisual ReasoningAlpha numeric ReasoningNumber Series. ***********

Annexure IV Tentative Timeline for the Recruitment Process to the posts of Technical Assistant (Gas Plant) and Technical Assistant (Air conditioning)

Sl. No.	Process	Timeline
1.	Publication of Written Examination results	February-2019
2.	Certificate Verification	March-2019
3.	Oral Test	April-2019
4.	Final Result	April-2019

Secretary